90 turbo

[Vin]

Hi
I'm new to DSM's,I just bought a 1990 turbo and I want to restore everything from the non working flip up lights to how to fully BPU this engine. It did come.with manual boost controller,and an 250lph fuel pump and injectors which I don't know cc,they have a colored oring adj.fuel pressure regulator etc.also how to I upload pics here it keeps saying file to large..I apologize in advance for not knowing all the proper terms etc..I'm old and retired.
Thanks
Vin

 

[Vin]

Funny how back in 1993 I ran M&H g60-15 on my notchback mustang drag car and they were so unpopular compared to Mickey Thompson but I loved M&H..
I'll grab a set of rims off a mitsu..this whole build is for sleeper look andfunction

 

[90laserRSfwd]

Sounds like your on the right track. Take it one step at a time and you'll have lots of fun with the car and avoid a bunch of down time. If you are concerned about axles, get an extra set ahead of time (from your local auto parts store) or DSS (http://www.driveshaftshop.com/import-axles/mitsubishi/mitsubishi-1990-1994-eclipse-2wd-only-400hp)

 

[Vin]

Pretty cost effective setup would be a Rota wheels (a lot of guys use the "slip streams"), M&H is hands down the best tire on a FWD car at the moment.

http://www.mandhtires.com/M-H-Racemaster-Drag-Slicks/8.5-24.5-15#.V7ocf6IYBpo

I'd recommend this ^ tire with a 15x8 wheel of your choosing (with correct bolt pattern and offset)

http://orlando.craigslist.org/for/5725271058.html

I was thinking of these as the street rims will these work..5x114 vs 114.3? Or donthey just round off as 5x114?

 

[90laserRSfwd]

I'm not sure on if the poster didn't add the .3 by accident or not. I've never heard of a 5x114. If you want to use those wheels you'll need to make sure they have a hub center bore of at least 67.1mm (dsm), I'm not sure how a 9" wheel with a 30 offset will fit on OEM style front suspension..

 

[Vin]

They remind me of the 1980s Ferrari mustang 5 stars..but I'll pass on them..my car is being tuned this week hopefully..i will make another update soon.
If anyone has a larger turbo and 1,000cc
Injectors cheap lemme know

 

[Vin]

Sounds like your on the right track. Take it one step at a time and you'll have lots of fun with the car and avoid a bunch of down time. If you are concerned about axles, get an extra set ahead of time (from your local auto parts store) or DSS (http://www.driveshaftshop.com/import-axles/mitsubishi/mitsubishi-1990-1994-eclipse-2wd-only-400hp)

You must have ESP,I was looking for axle and DOG BOX on the cheap tranny info.
I found MAGNUS..they are 5k.
I'm prepping my car for "WANNA GO FAST " 1/2MILE EVENT JAN 2017

 

[Vin]

Hey lasershark.

I found a guy with a garrett GT26 new in box,are these good for 4g63 and with what injector size if so?

 

[lasershark]

If it is this turbo or a similar variant then I would have to say it's not a great choice.
http://turbochargerspecs.blogspot.com/2011/03/garrett-gt25r-gt2554r-60-trim-270-hp.html
http://turbochargerspecs.blogspot.com/search/label/GT25
Take a look at this website
http://www.forcedperformance.net/CTGY/DSM-Turbo.html
Or you can hit up our forum turbo expert JusMX141 tell him your goals and he can put you in the right direction or build you one or what-not.
http://www.dsmtuners.com/threads/journal-bearing-turbocharger-rebuild-service.489013/

What kind of power are you looking to make? Is this going to be a drag type build, auto cross, daily driver, ect...?

 

[Vin]

Neither..1/2 mile is the new deal for me..ive been drag racing since 1989 and it's boring..we have here in southwest.
"WANNA go fast" it's 1/2 mile even on airport..badass.look it up on YouTube..ocala Florida jan 2017..i want to have my 1200cc & big turbo on by then..
I want 600hp+ by January.

A Saturn ion REDLINE has the Fwd record..i wanna smash it.

You must be logged in to view this image or video.

 

[Vin]

If it is this turbo or a similar variant then I would have to say it's not a great choice.
http://turbochargerspecs.blogspot.com/2011/03/garrett-gt25r-gt2554r-60-trim-270-hp.html
http://turbochargerspecs.blogspot.com/search/label/GT25
Take a look at this website
http://www.forcedperformance.net/CTGY/DSM-Turbo.html
Or you can hit up our forum turbo expert JusMX141 tell him your goals and he can put you in the right direction or build you one or what-not.
http://www.dsmtuners.com/threads/journal-bearing-turbocharger-rebuild-service.489013/

What kind of power are you looking to make? Is this going to be a drag type build, auto cross, daily driver, ect...?

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[lasershark]

What turbo did you decide on?

 

[Vin]

Didn't even contact shop yet we have 20G with the 650cc,just to break in the brand new forged,built motor w.V3LINK. Then I'll go with proformance..BLACK,or red turbo I think the trim was 50+,because I have nitrous as well so I'm not worried about lag. Plus the races in Jan is 1/2mile.

 

[Vin]

Hey lasershark.

I found a guy with a garrett GT26 new in box,are these good for 4g63 and with what injector size if so?

Well the shop finally got around to my 1G,and its running waiting for dyno time.

Going to run it a few times and then sell it

 

[lasershark]

Going to run it a few times and then sell it

Why is that?

 

[Vin]

Why is that?

No tuning support here...back West there were alot of tuning shops,here there isnt shit in Volusia county near me.

I also have a nitroused NOVA.
I put so much into this DSM,and i still have the spare stock oem..full engine On stand..i think I'll repaint and sell for what I have into just the engine longblock, parts,etc
$7500

 

[lasershark]

Well before you go off and try to attempt a build cost recovery; we do have remote tuners here on the forum.
http://www.dsmtuners.com/forum/freelancer-products-services.225/

 

[Vin]

Well before you go off and try to attempt a build cost recovery; we do have remote tuners here on the forum.
http://www.dsmtuners.com/forum/freelancer-products-services.225/

Thank you I'll let you know when car is finished

You must be logged in to view this image or video.

 

[Vin]

Need a 4g63t..tuner in central Florida ASAP..for ecm tuning
.please help

 

[Vin]

I found someone from orlando i won't mention until it's done..but they were highly recommended by KINGS PERFORMANCE..
Going to build for wanna go fast FWD class for 2018

 

[lasershark]

Glad you are sticking with it, you're going to have a blast!

 

[Vin]

Glad you are sticking with it, you're going to have a blast!

Yeah man..breaking it in on small 16G.and 650cc..then going 1500cc and T76..
it feels good 14lbs boost now to play with

 

[Vin]

This has been over a year and it's temporarily home to break in new engine those crower stage 2s are lumpy A.F.

 

[Vegas Smith]

Hit em hard

 

[Vin]

Hit em hard

Oh believe me..i will video this thing on boost and maybe bottle too..gimme 90 days max

 

[Vegas Smith]

What are your plans for transmission and axles?