I wanna peep some 4G63s, what's going on in that engine bay? Hows it look under that hood? How clean do you keep it? Hows your piping look? Do you care how it looks or just how well it works?
I wanna see it all. I wanna see a well done, clean, impressive engine build.
I’m in the market for some pistons and rods for my 97 Eclipse, anything better than stock preferably off a Evo 8 w good health. Also an intake manifold preferably a Evo 3 manifold or anything better than stock. You you guys know or have one please contact me asap. 🙏🏻🙏🏻
Hi! I remember removing 2 vacuum lines at the waste gate solenoid because I wanted to remove the restrictions but I don’t remember if the vacuum line that I have marked is gonna go under the second line where the restriction was?
And
On the Manifold where the EGT sensor is, can i Plug it with a...
I just got my 97 eclipse gst dyno tuned, and I noticed there is a slight leak from the manifold gaskets.
Do I need to retune the car after I replace the manifold gaskets?
Thank you.
Hi guys! I need help knowing what kind of turbo I have and what kind of turbo I have bought and which one should I put back in the car?-The purple one was the Turbo i had on the car. Previous owner does not know what the turbo or the manifold is called as it was not he who replaced it. I can...
I am selling the intake manifold that I had custom made for my car at a shop Called Street Or Strip Concept. This manifold will be great for somebody looking to be putting down anywhere from a stock 4G63T HP up to about 550HP. It is powder coated matte black and the throttle body flange has a...
Great condition just changing the route of the build, ships fast and safe from norfolk VA. was only used for about 500 miles before I decided to do a complete teardown and its been sitting for the year.$225 shipped , If you want me to port it for actual improved flow , $150 for this , if you...
Trying to get my intake manifold off but I have no idea how I am suppose to access the lower bolts... I have tried with everything that I have to get a socket or wrench on there. The design is dumb it has the bolts positioned right under the runners I can barely squeeze my arm under there with a...
Hi Guys, I have a rare piece , a HKS T4 DSM Manifold , never been mounted since I bought them
It is definately genuine, it is the darker unit in this pictures, the one that has the mounts for headshield.
I am looking at $600 shipped to your doorstep. Price includes paypal fees and shipping fee...
Heres so pics attached, just need some second opinions to what I have a feeling is a blown turbo. Finally got wiring done on car after a long while of sitting and put everything together, started up the car , and when you press the gas theres white smoke coming from the exhaust as well as the...
1000cc PTE injectors - SOLD
Stock 2g Exhaust manifold - $30 + Shipping - SOLD
[1G] MAFT v2.02 - $130 Shipped - SOLD
Large FMIC 3" inlet/outlet - SOLD
White high rise eclipse spoiler - $100 Local pickup only.
Good condition tan rear seats - $100 Local pickup only.I think that's everything...
Since my idle increased after installing these I'm almost certain this was the reason lol. Fully warmed up my idle is around 1500, prior to install my idle was probably around 800. Could this also be due to my blown turbo though? I'm thinking about leaving the FP exhaust manifold on but changing...
Hey guys, im completely new to these platforms, coming from n54’s and never ending misfireslast night i got a 97 gsx, one of the things i was told is the bold head broke off on the manifold, and stuck on the turbo, i found a local hx35 and was wondering what manifold would it fit, i was told...
Don't need this manifold anymore as I've upgraded to a TD05H. Didn't find any cracks after inspecting it. $40 USD, willing to ship from Alberta, Canada at buyer's expense.
16g eBay turbo 1000 miles with headers and dump pipe.-$200
Stock fuel rail with 560cc injectors-100
T3 eBay manifold-100
7Bolt Bare block (80k)-150
Stock cams-75
7bolt flywheel(needs resurface)-50
Purchased new from Straightlinespecialties in 2007. It’s a full TIG welded stainless steel twin scroll T4 manifold.Never used. It’s sitting collecting dust.Tial WGs are genuine and come with the manifold. Painted with 1500 degree black VHT. Asking $600. Less than half what I paid new.
Parting out 98 GSX Eclipse. It was a project weekend car.
I will be adding more parts to this thread.Prices include paypal fees.
Prices do not include shipping.
Shipping to Canada, HI, PR will cost extra.1. ECM Link V3 speed density. SOLD!!!
- EPROM ECU was purchased from ECM
- GM IAT, 4-bar...
Have some left over bolt ins from my evo9 looking to get rid of. Make reasonable offers and their yours.1. Evo 9 cylinder head (needs two new intake valves) has kelford 272s installed. Comes with COP setup from MAP $1000 + shipping2. Kinguwana 25g turbo billet compressor wheel internally...
We've had the small runner divided T4 to cover medium frame divided T4 turbos with a killer powerband, and now offer a large runner bottom mount to support all the way up to GT42 and S400 frame turbos!This is something we’ve wanted to do for a while, and after much scrutiny on collector...
After doing some searching on here I'm thinking it might be a balance shaft, bearing, or tensioner going bad. The noise can be described as either light grinding or a rapid rattle. It's definitely localized near the timing belt area, at first I thought it was coming from under the valve cover...
Turbo.
Pte 6165 DBB rebuilt as gt35r/gt37r hybrid with brand new billet gt35r 11 blade, brand new large frame BB cage, brand new gt37r turbine wheel. .63ar t3 turbine cover, .70 anti surge compressor cover. All genuine garrett parts. 0 miles never used. Good for quick spooling 600hp...
Howdy dsmers. I've been stuck on this for a while now. I've posted for help on the newbie forum (facebook LOL) and have boost leak tested my turd (1995 GST). I recently engine swapped this 95' cam angle sensor replacement. Here are some important health tests I JUST ran..I went in this...
knockoff 16g (normal shaft play) $85
2g fenders (no rust or dents minor scratches) $150 each or both for $250
97-99 Stock Headlights(one is a little fogged up and will need to be reconditioned)$80 Set of (2)95-96 stock camshafts
1G starter $20
2G starter $20
blown T25 turbo (will need to be...
Hello!After some google searching with little help and no difinitive answer, I could use some help. I’m not sure if my turbo is a T4 or a T3 flange and I don’t want to order a gasket for it before I know. Below is some information I’ve found with a picture and measurements of “basic” T3 and T4...
I am new to having an account on the forums, but i am making a top mount manifold for my 2g 7 bolt and i'm having clearance issues with one of the runners hitting this little square piece sticking out of the block. I'm wanting to cut it off, but i don't know if I'll have issues if I cut it off...
As the title says, I bought a used fp manifold and to my surprise when I received it, it had some cutting done to it to clear the bolts and washer I suppose. I've linked some picturesI was wondering if it the cuts were too deep that would cause some cracking over time or else...
The runners...
$275 shipped!Super nice 0 miles professionally freshly rebuilt TDO6H 20g dsm turbo. The wastegate plug has been removed for an external wastegate on the o2 housing setup to be used or plug the flapper hole and run an external wastegate on the manifold. (o2 housing pictured not for sale) Paid...
20g TURBO
Freshly rebuilt awesome tdo6 20g. Was told by Justin that it was a Slowboy Street/Strip 20g. 0 miles. Removed plug so it can be run with external wg off o2 housing like the one pictured. Paid 450 for it last year. $400 you pay shipping.TIAL 38mm 2 Bolt external wastegate
Purple...
Hey guys,
I'm performing a small garage clean out. The following parts are just what I have put into a list at this time.
If there are other items you need feel free to ask if I have it, though most of what I have are used OEM parts. Prices don't include shipping, however prices can be flexible...