Hey everyone, I got a question about my Holset HX40/35 6060 hybrid turbo with a 12cm2 t3 housing, Tial external gate and tubular exhaust manifold. I feel like I am having a serious issue getting this thing to spool up. The car is an auto with factory converter, Kiggly 5 disc clutches, and a...
hey everyone I am wondering is someone happens to know what the purpose of pin 11 is on a 91 awd dsm. I know it has something to do with the abs but what exactly is it doing? I need to know because I am making a jumper harness for my link stormX ecu to plug into the factory harness and need to...
Hey guys I am curious about a 1991 talon TSI mpi relay, is pin 8 on the relay supposed to be ignition power or grounded? I have looked on the forum and seen people saying both answers I talked to a good buddy of mine who knows electrical a bit better then I do and he says ignition power but I'd...
Hey guys looking to hear from those of you that have used a aem series 1 ecu in your auto DSM.First off does it work?Sounds like a silly question but after doing some searching here on tuners I found a thread stating that the harness pinouts are different and the ecu acts funny (but this was...
Well I figured I may as well start a bit of a build thread here, It will be slow going and no real big progress will happen for about a month or two but hey I got some stuff done already that I want to keep track of haha so here it is!this is the day we first picked up the car, we were...
Hey guys quick question, I just finished rebuilding my motor for my car and after putting close to 150km on the car after the build the rear tires locked up on the highway. I believe my tcase may have been missed and it seized. Is it possible this could have dealt damage to my trans as well...
I'm curious to know, has anyone ever ran a Garrett GTW3684 on their dsm before ? It is Garrett's equivalent to the 6262. Also does anyone know if the Garret would clear the water pipe using a treadstone performance cast manifold?Thanks in advance , also I tried searching but couldn't find...
well Back in the DSM game after taking a few years off, I just got finished building my 91 tsi awd. Sadly the car is still hours away but I'd like to meet some new faces.
This review is for the rtm racing fuel feed line kit that runs from the factory filter to the factory fuel rail. First let me start off by saying these guys have the best customer service I have ever delt with, and that's quite a few vendors I have ordered from. They respond to messages really...
I bought a cop set up for my talon and realized that there aren't a lot of diagrams for a 90 cop set up. I found one on google but I am really bad with reading them. If some one has pics of how they wired their 90 tsi for a cop set up it'd be greatly appreciated. But anyways here is the diagram...
Ok so I have spent a lot of time researching this product so please don't flame me, I even used the search bar lots and google and read up on many other forums. I just have a simple question.Do the ebay cop setups work, now I'm not asking will it work with out an arc2 or msd cdi, I just...
ok i have dumped thousands of dollars into my 2g, new turbo setup, intercooler, all regular maintenance, tuning software, ect. and the car still wont start! at first i didnt have a relay for the starter hooked up. thats now fixed. so then i thought compression, nope all 165. i know im getting...
ok so there is a site called projectzerog.com, it is all about 4g63 rwd swaps... i went to register but everytime i do it gives me an error saying i did not answer the question right... its a fill in the blank question that says mitsu_____ ..... now youd think the rest of that would be " bishi "...
like the title says i want to get a front mount for my daily driven 2g i dont need a super large intercooler so i will save myself 300+ dollars and put it else where into the car so i am looking at either getting a vrsf intercooler or a punishment racing. all feed back is welcome as long as it...
alright for the past 3 month s now i have not been able to get my 2g to start at all! all my relays are fine even the one uner the radio, all my fuses are also good.... yet somehow i am not getting power to the little blcak clip that hooks up to the starter. at first i thought it was just the...
alright well this has been my baby for years.but over the years parts have been stripped and my hopes have diminished.... i got to watch my 1st car out my window rot... well recently i purchased a decent 91 eagle talon tsi awd. i went to register it and found out that it needed a out of province...
ok so i am totally stripping 2 talons to make 1 good one and eventually buy another motor and wiring harness for the second.... but i have never taken out a wiring harness before and i have to.... is this a PITA to do?cause i will need to do this twice... my other question is once its out i was...
ok i have 500 bucks to spend on my dd 91 tsi awd all the maintenance is up to date including fluids. only thing it really needs now is a hg but thats on its way. sooo i was thinking about getting a pr fmic kit ( i do not want u guys to bash the kit i like it ) but i figure i could probally get...
I know somewhere on the net there is a site where you can put together your own rebuild kit I believe its even a supporting vendor on the site. but I just cannot find it... does anybody know who I am talking about they were really well priced I thought and I would like all the parts coming from...
ok so when i go to start my car i can hear a clicking, if i go to the solenoid under the radio it clicks... iis it bad?orwhen i removed the sstarter to see if it was seized ( which it was not ) the only way i could get it to spin with power was if i had a jumper between the relay right...
ok i know atm there are tons of these and i have read them all, but thy dont seem to be having the same problem as me other than it wont start.... soooi know i have fuel pressure, spark, and all that other stuff. but whats not happening is my starter doesnt even kick on. i looked on the...
ok so i have a 2g talon, with a 6 bolt swap. i am going to feed oil from my oil filter housing, now on the six bolt engint the turbo was fed through the head... so can i just put a bolt in the hole and call it good or do i need to do something special....
first off sorry about the spelling in this thread it was posted on another site so i just coppied and pasted it.ok i am really confused now... i want a kick ass turbo for my dsm only problem is idk what turbo to choose out of these four, holset hx 35 ( i already have one but its not...
ok, i know that the 2g tranny bolts up to a six bolt, that is not my question.i just bought a act 2100 with street disc installed that onto the car and torqued it to spec, now whe i go to put the tranny on it doesnt want to go on...!!!what is the simplest way of puttin a tranny on...
ok i have looked high and low on this site for the link, i know its here some where but i just cant seem to find it.i am looking for the ecu serial numbers so i can figure out if a ecu i am thinking about buying is an eprom or not, i dont wanna rip the guy off. if the ecu is an eprom i told...
well i was just wondering if any of you guys have ever used there intercoolers or there exhaust manifolds? i have a 95 tsi awd and i want to get the intercooler and exhaust mani for my car but if the quality is as low as the price then idk...
ok i already feel stupid for asking this.... how do you bolt this little snail on..... it looks way different than my 91 tsi's 14b set up.... where is the oil feed line? cause i dont see one all i see is the 2 coolant feeds... pics would be greatly apreciatednvm i figured it out... wow this blows
ok so the motor i bought oks like its out of time but im not quiet sure, at tdc the oil pump is in time but the crank looks like its out two teeth is that bad? the pin was already pulled by the previous owner so idk how he had it done or where, but here is a pic
ok i searched and did not come up with one single answer. there was one that i thought would work, but when i clicked on the link it said html not found so please dont hate me for asking.....all i want to know is will i need to bake the head light in the oven or do i just remove all the...
ok i have got myself a holset hx35w turbo i want to put onto my motor that i will be getting in a few weeks, anyway its not flanged to fit the mitsu exhaust mani, i want it to just bolt up. what will i need for this to work? is there an adapter plate or do i just need a different hotside? also...
ok so i just bought a 92 tsi awd 5spd talon, it needs a head gasket and studs, now i know there is a difference between the two motors only thing is, is there a way of telling before i order my parts. if anyone knows the build dates that would help or something visible i can check would be great...
ok so in a couple of days... or maybe tonight depending on the weather i will be preforming my very first wire tuck. i will be going to do the all common injector tuck, then maybe move some of the sensors if i feel gutsy. i am not sure if i will end up moving sensors around but its worth looking...
Ok so today me and a buddy were out driving my car and then a huge puff of blue smoke come out of my exhaust and then my engine light turned on. At first i thought my motor finally died but it kept driving fine and no more blue smoke. Later today I drove it again, it still had its engine light...
DSM Eclipse Rebuild Kit 4G63 Non-Turbo Pistons 90-92 - (eBay.ca item 190285673922 end time 09-Jun-09 00:44:25 EDT)ok so it says that kit is good for decent power but i know how the saying goes " you get what you pay for" do you guys think it applies to this kit??? its only the pistons i want...
ok so like the tittle says i have a few questions about what i sould do with my car. the car has dropped 2 cylinders and the turbo has shaft play so bad that its scrapping the walls of the turbo ( dont worry i stopped driving the car after i first herd the noise, and no peices of the turbo have...
ok so i know this is a super frequently asked question but i need to be 100000% sure i dont #### this up, this is the determaning factor if i stay dsm or find a new hobby. i will be running manley i beam rods, oem crank, and wiseco standard bore pistons.how am i supose to break these bad...
ok so my oil pressure gauge isnt working!! it worked when we picked it up. could it be because the sending unit or wire is caked in oil???? and if my car is cold ( -5 or colder ) my tach and speedo dont work and once it warms up they are fine WTF is going on!!!!
ok so my cousin is moving to Kelowna at the end of april and i would like to have kinda like a going away cruise with a whole bunch of dsm's from the edmonton area this will take place on a weekend near the 15th of april. i would like to see 15 dsms show up, i already have 4 so some support from...
ok so i have polyurothane motor mounts on my old 90 tsi awd and i want to take them off so i can put them onto my new 90 tsi but i dont know how to take them out how can i do this and i do not have a press. iff possible i will just take the whole mount off but i will do what ever is easier
ok so i aquired this 90 tsi awd talon from a buddy about a month ago. it was a quick trade because he owed me $2500 i greatfully accepted this as payment and told him it would be made into a full out street n strip race car. the plans for my car are as followed also they are in order...