my buddy just had a similar issue with my old 2g, turned out a connection in the remote came loose, re soldered it and haven't had it since.

I have thought about doing something like this but I really dont want curly cords. fpr now I have 3d printed a button box that goes where the coin holder is beside the eco button. it works but Id rather paddles.

I love the install but I wanna see how you installed the paddles! I tried on my 1g but couldn't find a clean way of doing it

Hey everyone, I got a question about my Holset HX40/35 6060 hybrid turbo with a 12cm2 t3 housing, Tial external gate and tubular exhaust manifold. I feel like I am having a serious issue getting this thing to spool up. The car is an auto with factory converter, Kiggly 5 disc clutches, and a...

Today I added my GPS sensor to my Link Voodoo ECU so I can log a clean speed signal. Managed to do it in a way that no holes had to be drilled in my dash so I'm pleased. Tested it and happy to report that it works fantastic.

Yea hopefully I'm heading in the right direction now, the base tune we are working on atm is super safe but its nice to just be able to drive the car again.

Update 3/16/2024Wow I really need to do better at updating this build, since this last post the car has made a major transformation. Ended up having some bad luck out testing the car one night and had two injectors stick shut on me taking out them motor again :banghead:.Sourced a new to me...

Congrats on Sick Week Tony! Currently in the process of getting my 1G ready for sub 10 sec 1/4 mile passes as well. I am curious what size of tire do you run?

Yep sure is.Is there much room for upgrades for these turbos? And does it use a 20g wheel if I were to replace it?

Oh nice im on a hx40/35 hybrid 6060 this season, You had an upper rad hose that you found that connects to your chase bays water neck, and ran to the rad. That set up looked really clean.

hey guys back in April of 2020 I posted this turbo that was found to be a hybrid 17c off a Syclone/Typhoon, I only just now got around to getting wheel sizes for the impeller and turbine they are as followedTurbine wheel Inducer 65.10mm exducer 55.31mmImpeller wheel Inducer 50.75mm...

I have had a blast reading through all this thread your set up is like exactly what I had planned to do for my own build. However maybe I missed it , but what holset are you running and do you remember what the hose came off of that you used for the upper rad hose?

Oh there's a ton more then 3 just most use fb now

Update 7/24/2022Made a very small but extremely noticeable change to the car two days ago also quick warning this one is a big read despite being a quick fix, I have been having an issue with the car just straight up feeling super slow pretty much as soon as I put the new ecu in the car. Well...

Update 7/17/2022Little bit of an update with the car, got the ecu put in and have a very basic " tune " in it I am no tuner but I have got it good enough that I trust the car to get me to and from work safely now. at first I was having an issue with the ecu reading that it was extremely lean...

yuup still here, will be takiing mine to the season opener tomorrow but shes not a looker, hell she barely moves at this point but shes still ticking!

Update 4/3/2022Wow been a hot minute, so figured I'd give an update on this as a lot has happened. Since the last major update the car has been fixed and I'm happy to say it is running and driving awesome. Currently the setup is a sb3076r ball bearing turbo, still has a the built bottom end...

bringing this back, who all is still around? got my dsm up to edmonton two days ago and shes almost ready to rock for the winter just need to fix a small power steering leak, wire up my smart 100.1 shift box and in free time build it a adapter harness for the new link stormX ecu!

you guys are awesom thanks so then this is hopefully something that my new ecu should be able to handle no issues may just need to add a relay in but hopefully not!

hey everyone I am wondering is someone happens to know what the purpose of pin 11 is on a 91 awd dsm. I know it has something to do with the abs but what exactly is it doing? I need to know because I am making a jumper harness for my link stormX ecu to plug into the factory harness and need to...

I'm already hunting for a 1g ecu with link, I'm over this thing

I would love to go to an event but sadly for me I cant get across the border atm with covid and the car still isnt finished. I am hoping to make it to tx2k22 if that happens and if so then maybe also do the shootout the same year. I definitely will not be fast though haha maybe high 12s as we...

I'm still around too just been lurking hard lol. Hopefully get my car running next week thanks to @steve !

not at all man you are helping out quite a bit I am not sure why that didn't make sense to me reading it on my own but you have been a huge help both here and in PM I hope others can also find this information useful I will update this thread around sept 12th with how I make out! either the aem...

Appreciate the diagram but this is like a magical map to me 😂

Hey guys I am curious about a 1991 talon TSI mpi relay, is pin 8 on the relay supposed to be ignition power or grounded? I have looked on the forum and seen people saying both answers I talked to a good buddy of mine who knows electrical a bit better then I do and he says ignition power but I'd...

Hey guys looking to hear from those of you that have used a aem series 1 ecu in your auto DSM.First off does it work?Sounds like a silly question but after doing some searching here on tuners I found a thread stating that the harness pinouts are different and the ecu acts funny (but this was...

Damn I completely forgot about this and you hit the nail on the head that's the exact housing with a elbow welded onto it. Thanks a lot man! Now I just need to clean it up and figure out what exhaust housing is on it

Can anyone show me a picture of a 18g or 20g with the same compressor cover as mine with Mitsubishi stamped into it like that? Most 20gs I've seen look way different.

See 20g or t28 was my first thought but then I started reading that turbonetics did a few bolt on turbos for dsms back in the day but I can't find any pictures of them . And I can't seem to find any compressor cover that looks like this on a 20g or any mitsu turbo for that matter.

Hey guys picked this turbo up the other day, and I'm just curious if you can identify it. Who ever powder coated it coated over the part number. All I really have to go off of is that Mitsubishi is stamped I to the housing , and it has a turbonetics elbow welded on it. It also came with a old...

Wow I forgot about this thread, Cars finished and has been running strong up until a few nights ago when the diff may have locked up. Currently got it up on stands diagnosing the issue.

Got it figured out it's a gt3076R hybrid turbo

Here's a tricky one , got this turbo in a junk yard, mitsu exhaust side , Garrett chra, and a large compressor cover.

Wow thanks guys I thought this thread was going to die cause no one had commented yet haha!@96Formula6spd My favorite evo is actually an evo 6 as well, my cousin that I live with actually has a blue one too haha. Sadly I dobt many evo 1s will make it to the states as most are selling for new...

Well got a very small update, managed to get some christmas car parts and was gifted a new HKS SSQV 3 that is not a fake.asides from that I just got back from my christmas break so progress should get rolling again shortly.I also managed to pick up a new daily driver, I p[icked up a...

We got a bit of a time warp here but you can see that the girdle splash guard, oil pickup tube, hydraulic tensioner, oil filter housing, and motor mount bracket/ tension arm is now installed.another view.And I had also had the oil pan on as well and it was at that point I...

Well I figured I may as well start a bit of a build thread here, It will be slow going and no real big progress will happen for about a month or two but hey I got some stuff done already that I want to keep track of haha so here it is!this is the day we first picked up the car, we were...

Update 9/4/2016Wow exactly one month ago since my last post haha, I finally got my Aeromotive FPR also got a clear timing cover to show off my new cam gears. Oh I also managed to snag a set of Authentic HKS cam gears out of my new Evo 1 too haha. So now I need to decide which cam gears I want...

Update 8/4/2016Sadly this may be the last update this summer for the car as some things happened this past long weekend. I drove up with my box of parts all happy to work on the car and install as much as I could but first decided to take the old girl out for a quick sprint before putting on...

Yea that kinda sucks but when I do it I will be getting a his timing belt , clear timing cover, hopefully get my new valve cover, and can get better gaskets for both of my manifolds . So it will be worth it. Plus I have gotten pretty fast at pulling them haha.

damn man she is clean! yup car is up and running I just need to deal with a few personal things before I can get the car up to Edmonton still but its in the works. also got a ton of new stuff for it. you should check out my cars profile it gets updated anytime I get anything new or make...

Just read through everything and man you have done a great job! I actually dont mind the rims on it right now for the simple fact that they keep it looking like a sleeper but I cant wait to see it with a nicer set on it. also I know the feels of having a crappy altitude to get 1/4 mile passes...

peon_slayer updated Old RedView updates to this DSM profile...

peon_slayer updated Old RedView updates to this DSM profile...

Update 7/2/2016Well got another big update for the car, I met a local DSM guy who is pretty chill and has a ton of the parts I needed so we managed to make a pretty good deal on all the stuff. So I managed to score a good shape head with BC springs and retainers, brand new GSC Zero Tick...

Update 6/28/2016Well there is a bit of an update tonight, I managed to get the car in perfect working order now. I had to change the turbo, Tcase, some coolant lines, and a few other small items. Replacing the turbo really scared me as when I took it off I discovered the old nut holding on the...

Hey guys quick question, I just finished rebuilding my motor for my car and after putting close to 150km on the car after the build the rear tires locked up on the highway. I believe my tcase may have been missed and it seized. Is it possible this could have dealt damage to my trans as well...

Man that's awesome, I just got to go for my first pass down the strip in years two days ago. I cannot wait to have my car moving again!

Yes for sure man, if you ever need a hand let me know I'm always down to help .