The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support ExtremePSI

Search results for query: *

  1. galant swap

    i have 1993 FWD eagle talon with a 6 bolt 1992 4g63t swap. i want to pull this motor out of my talon and put it into a galant. what year galants will this motor work with?
  2. bushing picture?

    yes and those two bolts that go through the bracket that that is mounted on have the two bushings under the head of the bolt.
  3. bushing picture?

    and the ones that have two bolts that bolt to the little bracket coming off the tanny that is also held by two bolts. what im talking about is a little further up the shifter cables towards the firewall.
  4. bushing picture?

    anyone have a picture of the bushings for the shifter cables in the engine bay of a 1992 eagle talon FWD turbo? and how many are there? just two, one for each bolt?thanks
  5. shifter cable bushings?

    sweet. and what was holding them was i had the little bracket bolted with the two bolts to the tranny then had the cables with there little bracket bolted to that bracket off the tranny. solidly mounted without any bushings anywhere lol pretty much. does anyone have a pic they could post up of...
  6. shifter cable bushings?

    hi when i put my tranny back in my 1992 eagel talon 5 speed FWD turbo model. i did not put the two bushings under the bolts that hold the cable to the bracket on the tranny on the pasenger side? do i need these in there? could this keep the car from going in gear? it almost goes in gear but...
  7. clutch adjustment confusion continued.....

    i was under the car and had someone inside. with the bleeder screw on the slave closed i told them to push the pedal down then i opened the bleeder. then closed it and told them to pick the pedal up slowly. i did this 30 times. and theclutch master was benchbled very well before it was put on.
  8. clutch adjustment confusion continued.....

    slave and master are brand new OEM mitsubishi parts with no leaks. pedal is adjusted perfectly and i bled it 30 times yesterday. the only thing i didnt change on it wasthe clutch fork it is still theoriginal one. is there a chance that replacing this will fix my problem?thanks for the...
  9. clutch adjustment confusion continued.....

    k i got the clutch switch and rod adjusted perfectly. it pulls now when i try and put it in fouth and fifth gear. now when i try and put it into first, second, or third gears it almost engages thegear fine but right before it does it grinds. so whats left to do bleed it more? it feels so close...
  10. clutch adjustment confusion

    alrite guessi go turn it in more till i can barely push it in and see what happens. let you guys know later.thanksk i got the rod and the clutch switch adjusted perfectly. now when i try to put it in gear it only pulls the car forward when i try and pull the shifter into fourth and fifth...
  11. clutch adjustment confusion

    i have a 1993 FWD eagle talon with a 1992 6 bolt motor swap. i have a stock internally transmission but have just put on a exedy stage 2 thickcerametallic clutch disc and exedy pressure plate with a fidanze 13lb. aluminum flywheel and a OEM mitsubishi throwout bearing. i have also changed the...
  12. how do you tell if the slave cylinder is bad?

    well its a autozone one and i have a stage two exedy clutch and fidanza flywheel in it so im guessing that is what caused it to blow out.
  13. how do you tell if the slave cylinder is bad?

    o alrite because it was dry on the inside when i put it on. i put it on and bled it good then did a couple of pedal pump to feel how the clutch was then went back under and pulled the boot back and put my finger in it and fluid had soaked the whole walls of the slave. so i guess the piston blew...
  14. how do you tell if the slave cylinder is bad?

    so if i pull the boot off and put my finger in the bore and i feel the inside walls and if they are wet that means it is leaking and should be replaced?
  15. how do you tell if the slave cylinder is bad?

    alrite but does fluid on the inside walls where the piston travels mean that the slave is bad?
  16. how do you tell if the slave cylinder is bad?

    k i figured. so when you pull the rubber boot off the slave cylinder should the inside of the bore like the inside walls that the piston travels up and down on be wet? damp? dry?
  17. how do you tell if the slave cylinder is bad?

    what are common ways to tell if your slave cylinder has gone bad?
  18. differnt sized slave?

    well i ask because my clutch is not engageing properly but i did the correct pedal adjustment and bled the system with a vaccum bleeder. the slave i had on it when i bought the car was the same one i just put on my car with the same clutch setup that i had when i bought the car. it appears like...
  19. differnt sized slave?

    awsome love the pics! so what would happen if you put the AWD slaveo nthe FWD or vice versa? would that mess up the engagement?thanks for the pics they helped lol!
  20. differnt sized slave?

    so the only diffence is the bore size between the FWD models and the AWD models?
  21. differnt sized slave?

    are the N/A 2.0l 4g63 1st gen talons or eclipses slave cylinder the same size as the 2.0 liter turbo 4g63t ist gen's? i couldnt find anything on this.
  22. slave cylinder sizes

    yea its right on the money. i pulled the little dust boot off my slave the other day and felt down inside of it and i dont know if its from where i bled it a lot but the inside walls of the bore were wet? so i think it may be leaking there around the piston allowing just enough air in the system...
  23. slave cylinder sizes

    okay in my parts system at work we have three differnt part numbers for my eagle tlaon's slave cylinder. 1992 model. i think my slave cylinder is what is causing my clutch engagment problems so i was wondering if there was differnce between the slave cylinders?
  24. bout to freaking give up on this talon!

    its a 1g. and no there is no signs of fluid leakage anywhere on the salve besides inside the bore and there is no leakge on from the clutch master cylinder inside or outside the car. no kinked hoses. pedal properly adjusted. i did pull the boot off the slave tho and i dont know if it was from...
  25. bout to freaking give up on this talon!

    got it adjusted to the point where i can push the slave clylinder all the way and the gears still arent engaging. what now? :notgood:
  26. bout to freaking give up on this talon!

    alrighty im going to go out and adjust it now and i will be back in a few to let you know what happend. :thumb: i should be shifitng gears pretty smaoothly after that is adjusted correct? :pray:
  27. bout to freaking give up on this talon!

    perfect!;) so right now i have the adjustment rod adjusted to the point where i cannot push the slave in by hand. so now i need to go half turns back in until i can just barely push the slave cylinder in all the way correct? :sneaky:
  28. bout to freaking give up on this talon!

    yes it is a very good video thank you! okay so i have the pedal adjusted pretty much all the way to the end of the threads. and when i get under the car i can no longer push the slave in by hand. so do i need to tightend the under dash adjustment just a little like a half turn till i can barely...
  29. bout to freaking give up on this talon!

    so i need to turn the u-clip all the way down back towards the driver?
  30. bout to freaking give up on this talon!

    but i dont understand ### everyhting in the tranny was done right. all bolts toruqued right. it was aligned properly and a new oem throw out bearing used in it as well. ive adjusted the rod nearly halfway down the shaft then the pedal got spongy feeling and does not come back up when its at the...
  31. bout to freaking give up on this talon!

    well i would love to but theres no way i could get it up there. would a slave cylinder extension rod allow the clutch to engage properly? and yes i have read every post on here about them but none have clearly said that yes it will mask problem and allow the clutch to engage.
  32. bout to freaking give up on this talon!

    my 1g dsm has a all new clutch and flywheel. package. new clutch master cylinder, slave cylinder all that jazz. the car will not go into gear for anything. it starts to go into first gear then grinds and when i try and engage any other gears it starts to pull forward. i have bled the system...
  33. new clutch woes?????

    excellent! thats what i like to hear. so my rod now is only tightend down about 3or 4 threads so i just need to loosen the lock nut and turn it one turn each time till i can almost not push the slave cylinder in by hand any more correct?is that the right way to do it?
  34. new clutch woes?????

    okay perfect thank you! i just did team rips bleeding procedure exactly as they say to. the first part i did 15 times and the second part i did 4 times. it helped as little but when i get close to go into gears it will grind first and then start pulling the car forward in any other gear i...
  35. new clutch woes?????

    is that the rod above the gas pedal that goes into the clutch master cylinder?any ideas?
  36. new clutch woes?????

    yes i sure did. i do not trust any other throwout bearing besides the OEM one!
  37. new clutch woes?????

    so the rod going through the firewall in to the clutch master cylinder (which is above my gas pedal on the 1g) it is currently not tightnend down as to pull it out of the clutch master cylinder but rather loosened so it goes further in to the clutch master cylinder is this correct?any ideas...
  38. new clutch woes?????

    well i measured everyhting and it seemed to be in specs but i dont really know. i dont really understand what the manuel wants me to me to do. the height from the floor to the pedal is right and the freeplay from where the pedal sits to where i start feeling pressure is bout 1/2 and inch. does...
  39. new clutch woes?????

    yea i got my haynes manuel for it. is that pretty much the same procedure as the other threads talk about?
  40. new clutch woes?????

    alrite and as far as adjusting the clutch pedal i do not know how exactly ot doi have read many many walk thorughs and i just cannot make any sense of it is there a way to put it in stupid people terms? lol :ohdamn:
  41. new clutch woes?????

    i have a 1993 eagle talon with a 6 bolt 4g63t from a 1992 talon in it. okay... i took my tranny out awhile ago and put a new clutch and flywheel in and new TOB. then i also replaced the slave cylinder, rod and all, and the clutch master cylinder both parts were bled then. adn i put a all new...
  42. ignition issues

    excellent thank you very much! that is exactly what i was looking for.
  43. ignition issues

    i need the firing order off the coil pack on my 1992 eagle talon with the 6 bolt 4G63t motor. i got new wires and the old ones where not labled correcly so i do not know how to run the new ones off the coil to the right cylinder. and also could i get the firing order of the cylinders and where...
  44. vaccum lines to thermostat housing? please help!

    thank you so much that is exactly what i am looking for and i got it all hooked up now correctly! thank you so much :thumb:
  45. vaccum lines to thermostat housing? please help!

    I have a 1992 eagle talon with the 6-bolt 4g63t and there is a fitting that comes out of the thermostat housing and it has a yellow vaccum like fitting on it with two nipples. there are vaccum lines that come around to this and there are four lines. two connect to one black plastic vaccum...
  46. shifter cables?

    that will do it thank you so much!
  47. shifter cables?

    im trying to re hook up my shifter cables and i cant figure out how the one closet to the engine block hooks back up can someone please post up a picture of theirs or something? thee are absolutly no pictures of how they are hooked up anywhere.please help
  48. differnt setup?

    o okay then the previous owner messed his up. he dosent have an airbox anymore he has an aftermarket in take. the line that should be going to the airbox is going to the first nipple closet to the firewall on the throttle body and the other line is going to the nipple on top of the wastegate...
  49. differnt setup?

    i was working on a freinds AWD 1992 eagle talon tsi yesterday. and i noticed that the wastegate setup was differnt than my FWD eagle talon with the same motor but i have a lot more mods done to mine than the other motor. on my setup i am using the stock side mount intercooler and i have a big...
  50. 6 or 7

    so pretty much depending on the year those things you listed are whats different between them?
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top