So i either have a bad sensor or a wiring issue. I've never had a dummy sensor fail like this before but eventually after the cars up to operating temp and its been driven for a while my dummy light starts to go off at idle. Quick side note, no idle controls so the rpms drop pretty low when i...

92 GSX Trying to get the AC system to work but it wont turn on.When I press the button neither the orange or green light will come on and I get no power to the AC clutch. The driver side fan will turn on however when ever the ac button is on. At the AC relay in the engine bay I've confirmed it...

Right now my exhaust system is just the n/t manifold and thats it, no down pipe or nothing. I installed my old wideband sensor in the stock sensors location. It seems as if it reads fine for almost the first minute of the car running, then it bottoms out lean. Turn off car, start back up and...

My computer crashed a few months ago and i lost my copy of mmcd 1.8 .Does anyone have a copy of that version? The thread on here that used to have a link to download it doesn't work no more. I found a copy from another site but its corrupt. Once installed it'll eventually crash my palm bricking...

I've Completely forgot about checking the local forum here, first time this year. Looks like its been D E A D. Is everybody over on the Facebook Mitsu/Dsm scene page now? Whats everyone been up too?

Does anyone have a good passenger side axle or perhaps one i could use as a core?Also looking for a 1g fwd cross member.

Anyone know if/where i can get some cut to length steel braided oil line locally? My turbo feed line sprung a leak and i don't think its long enough to cut out the bad part. needs to be at least 2 feet.Thanks guys.

Heres how to build a basic leak down tester. It does not have a a guage but is still very useful to determine if your head gasket or valves are leaking as well as how bad your rings my be. It would be very simple to add a guage to this if you chose to do so.Parts: spark plug anti fouler (14mm...

So after roughly two years of collecting parts, i finally pieced everything together i needed to turbo my 1.8. Picked up my manifolds from a previous turbo 1.8 part out. Log style manifold, smim, ebay ic piping and bov, ebay afpr, safc neo, homemade downpipe, t3 to dsm flange adapter, 14b turbo...

So i'm trying to help my friend get his 97 eagle talon running. Its suffering from no spark or injector pulse. All fuses tested good. So far i have found that the coil is not getting a constant power source to the middle pin. I checked pin one on the cam angle sensor and it is not receiving the...

1g 91-94 awd transmission, One gear select lever is frozen, im assuming its bent, as you can force it to move. Everything else seems fine. $50 OBO1g bov crushed $20 1g coil pack 91-94 $25Blown t25 has oil/water lines, and wastegate, exhuast housing in good shape no broken bolts, compressor...

Need some quick quick cash. Everything is for sale until midnight wednesday. 472-8123, local only!4g63 long block 500 bare 2.0 head 25 1g awd tranny busted 50 (5spd)91-94 1g awd tranny busted 50 (5spd)91-94 1g awd transfer case (unknown condition) 25(91-94) 1g eprom ecu 150 t3 45 trim turbo...

Looking for a few parts.Stock sidemount intercooler 14b wastegate actuator jpipe Stock FWD Turbo downpipe. Stock O2 housingCash in hand, If you have any of them either give me a pm or text with how much your asking for. 472-8123

Okay so i was throwing a code for injectors every now and then. Tried 3 different resistors, and none made a difference. So i went and bought some injectors and put them in. Still getting the injector code every now and then, just not as often. So after that i decided to wire in new injector pig...

Gsx 1, snow 0.Next up the fwd.EDIT: And the fwd said what snow? fwd a million, snow zero.

I want to cut out my spare tire wheel well and replace it with a piece of flat sheet metal. Do any of you know anyone that can weld and would do it for around say 50 bucks(doesnt have to look pretty just hold good), I'll do all the prep work. If not i'll just attempt to do it myself with my arc...

El Paso Motorplex will be opened sunday from noon to 5. $20 to race, and they will have the times.

Anyone have a stock 1g bov or a recirculated aftermarket bov for sale? Or a 1g dsmlink, any version for sale?

(copied from epr)We will be open with the tree and timeslips this Wednesday the 24th as a local racer/turkey day appreciation race day.OPEN FROM 6P-10p$10 to race....$7 to spectate......on southwest drags there should be a thread about this too with a printable coupon for $2 off...