so i seen a couple people doing this so i tried it myself and it turned out great.i started out with an angle grinder, and it took out the first letter(D) within 30 seconds so i decided to use a cutting wheel on the angle grinder so i couls lightly shave a little at a time. it ended up...
with the push start, you will still need the safety swich thing cleared up. thats what it sounds like the problem would be. a push start you are just using instead of a key, witch meand you still have to have your foot on that clutch pedal to start it.... also if you decide to do a push start...
cant wait to see the updates, just spent a little too much time reading this whole thing but it was all worth it. keep up the good work, this will prob be the cleanest 2g engine bay i have ever seen.
you have all these n/t guyes saying keep the 420a but dont listen to them. i just sold my RS W/turbo to buy awd. if you have little money to play with like i did then you will never get the car turboed. it will cost you about 2500 to turbo with new parts and everything you will need to be just...
the last thing he said sounds like some b/s.... just needs the coil done and the vacume lines... why wouldnt he take the extra hour to do this himself if everything is ok and just sell it saying it runs fine. any dsmer wouldnt let 30 min of work stop them from hearing the car run. you know what...
so i have been looking for a new 2g awd in my area and i came across this one that i just cant turn away from. it is a 95 tsi awd with a 4g64 bottom end. the mods it has are,
4g64 stock bottom end
fully rebuilt head (ported and polished) all new valves,guids, retainers, springs
walbro 255...
so i see your running the same bottom end, any prblems with it? have you ever dynoed or made a pass with this setup? i was planning on swapping out the 16g with the holset hx35 with the bullseye CH, bigger injectors, smim, some kind of exaust mani, getting a wb02, and dsmlink. i just like the...
so i have been looking for a new 2g awd in my area and i came across this one that i just cant turn away from. it is a 95 tsi awd with a 4g64 bottom end. the mods it has are,
4g64 stock bottom end
fully rebuilt head (ported and polished) all new valves,guids, retainers, springs
walbro 255...
hey keep that to yourself, i mean it is cool to know that but the guyes who own the site are going to see that and sell. then all of a sudden we will get all kinds of changes we dont want, and then noone will come on the site, then i wont be able to figure out my problems.
i honestly dont know, if you dont then it might make the same chatering. anyone else have any input on this. remember he is putting a stock clutch and tob in. it dont have the normal "C" looking clip. it just has 2 little built in prongs on the outside of the TOB
you have a new OEM to go into it? then no you wont need a new flywheel. you dont need a flywheel. i would recomend the parts that blazebolt said. and greese that TOB.the way to do this is pull battery and battery pan aand bracket
there is plastic shields in the driverside wheel wel that...
i just did my old 95 n/a to days ago. it took me 4 hours to get it apart and about 5 to put back together. yes you should pull both drive shafts. it will make it alot easier. another thing is if you have the stock clutch in there, it is alot diferent then a afterrmarket. the pressure plate and...
seems like i know a little more then you think, read these last couple of posts, i have only owned a 4g63 for a few days and i know what they boost stock even tho im far from stock. seems like your learning the wrong way. i know its not throw a part on and go, like i said its not my car i was...
here check this one out, it is about a 20 min drivve from you. the only bad thing is its not awd. im not telling you to get it but it dont have any problems....ALOT OF MODS1997 Eagle Talon TSI 5 Speed w/ Mods
crank walk is not that common. i was reading somewhere and it said something about only 14% get it or something like that. it also said that if you dont get it by around 100k miles then dont worry about it, i dont know how true it is but it just something to think about. i live in garfield hts...
ok so i went to the guyes house and after about 3 hours of work i got the tranny off and clutch pulled off. first the clutch was blown apart, second the pressure plate prongs were smashed to crap. and third is that i have never seen a clutch like this before,, the preassure plate and clutch disc...
i am getting this same problem, i just sold my 420a-t today and the guy called me tonight and said something happend so i had to go help him out. i got there and it would go into gear with car off but wouldnt with the car on, now if i put in first and hold down the clutch and start it, it starts...
i did everything right on my 420a-t but it is going to be gone tomorrow and im picking up this 95 tsi awd, never owned a 4g63 to care as much about them but i guess i will never take advice from the guyes around here. well the car im pickiing up tomorrow still wont be 4g63 but ill let you guyes...
what do you mean 2g cant monitor on a logger, even with the epromp? he isnt driving the car, we were going to get to the fuel but he ran tight on cash and we never got around to doing it, now he is selling it, and he burnt up his 1st gear somehow, he was planning on running more then 14 when he...
hey people i just went through this and you guyes are prob confusing the sh** out of him. he dont need anything but a boost controller and a boost guage, to get it where he wants it. and who is the guy saying they are only good for "about 10-12psi" the 2g's come stock at 12psi. you could crank...
you know that hard layer on the top of the snow from when the sun melts it a little bit. well im sure with that metro you could drive right over that stuff. my father just bought a 97 metro for 300bucks and there isnt nothing to the thing.i got my trusty sled dog reddy to go......
the f&f car was a 420a, you can see it in the begining of the movie when they are all in the ally way getting ready to race. and it is non turbo also. i know they use more then one eclipse in the movie but one of them were on ebay a couple of years ago and it came with paper work saying it was...
landoawd- i dont know what your talking about, but i did read all the posts, and the only rims i was knocking was my own, thanks there buddyhousegsx- yes i know they are on the wrong was, its not like i drive it or am going to drive it anytime soon. thanks for looking out just incase i...
under the hood is nice, all you need is a little bondo, sand paper and paint, and you can also refinish your hood, just sand her down really good and throw some clear coat on it, or whatever they use, not sure.you must have not sold it because you told me i made you feel bad for leaving. ha ha
hahhaa i noticed the poly mounts on it also.IMO i would do it. i would tell the guy 1300 for it all including exaust and fmic. and if he dont, then just walk away and find another buy. i had a chance to buy 2 95's when i bought mine for an extra 700, and im kind pissed that i didnt. an...
i dont know if you figured it out about the bumper support brackets that you asked about but there are 3 bolts on the bottom side of them to take them off. .. it looks like its comming together really good. you said you where going to do the bottom end over the winter? i would say you should do...
when i started out on my 95, i bought a missng link for it and tryed that out, that made the car run like crap so then i heard that you couldnt do the ML on the 95, so i got a FCD off a friend and it runs like a champ now.
i wonder who that guy started sh*t with. some one had to have done that because all 4 wouldnt have fallen off. now is the time for him to get one of those stickers that say "no fat chicks"
ya like i said it is a friends car. we have been told about the gm MAF. i dont know anything about them. another thing i dont know about is the wide band o2. whats that all about. the 20g has the internal wastgate and we dont even know what psi the spring is set at. is there anyway to find out...
20g is what he wanted so thats what he got. he didnt spend alot for it.yes the rfl does not recurculate. whats the problem with that. i dont know as much about the 4g63 but it seems to run ok without. another friend just went to the hks ssq bov and did not recurculate and he just popped a...