Have a strange situation with this seal leaking and looking to see if anyone had the same issue once upon a time and what fixed it?Just had the T Case rebuilt so all parts/seals are brand new, there is no movement in any of the parts etc. Notable mention about this issue is that I didn't have...
For those that have the Evo 9 rims what tire setup did you like the most or least the best on a 1g? Looking for tires that have good grip but not wear out too fast. What size did you find fit the best?
Time for everyone's opinions suggestions and inputs on this one. Working on a little flywheel project that may benefit us all, Well AWD 6 bolt guys for now anyway 😁1. What would be the preferred material that should be used for a flywheel? Example: Aftermarket companies use 4140 Alloy stamped...
Looking for some ideas or suggestions on what type of fusebox you used or would buy to move some fuses/battery around etc. Feel free to put your pics of your setup. It helps with ideas.Looking for an all in one as small as I can get but sometimes that's not possible fusebox to power the...
Just a little fun
With the internet being as small as it is and all, its possible I may have missed it but in all my years of looking at pictures of our cars I have never found a picture of all 3 models in one picture?1G Challenge:
Find a exterior picture with all 3 turbo models only...
FWD guys,
What brand/size/thickness Intercooler have you found fits the best behind the shorter FWD bumper cover? I will be cutting the back side of the bumper support to help get the I/C up high enough, would like to have the piping ran thru the holes where the A/C lines go thru instead of...
Think I have discovered a issue no one has ran into before or at least I have not seen any mention of before OMG"I know impossible you say".I am using the half shaft in my FWD but for some reason as the video shows the holes are not lining up?I know there are 2 different style half shafts...
Need a little clarification in getting this modification completed, the harness has a connector for a AEM infinity instead of the stock ecu connectors.
As some know the 90's are a bit different than the 91+ when it comes to finding the correct connectors for this install. Such as 1990 car uses...
If you havent seen it yet. I guess the shirt I seen recently is true it said LS swap the worldLooks like we have options if parts for the 4G63 stop being made. Starts at 4:45 to 9:34
Anyone or know of a place that does 3D for small parts?
I recently had my headliner redone and is now a bit thicker than the 30 year old one that was up there combined with being exposed to the heat and sun for years as I went to put the sunroof cover back and when i turned the knob to lock it...
I had a few exhaust leaks at the turbo so i went ahead and ordered a few gaskets from Extreme PSI one is the new 6 ply turbo manifold to turbo gasket https://www.extremepsi.com/store/product.php?productid=29669&cat=0&page=1
I know it says:
**PLEASE NOTE: OUR 7CM HOUSING GASKETS WILL ONLY FIT...
Well I have a blown out 02 to turbo housing gasket and manifold to turbo,was going to go order some copper ones from Darren but he doesnt carry the 02 housing anymore. Anyone know of another place to get a good gasket?
Thought I would share this guys channel as he has a lot of excellent information on how to do things right. Although he deals mainly with motorcycles the techniques can still be applied.Here are 2 good ones
Found this from HyperMonsterMotorsport on FB.. Guess people are still R&Ding our motors. Wonder how much this is costing someone. Either way its awesome
Link to all things ive done so far: http://www.dsmtuners.com/threads/gears-crunching-poor-shift-quality-etc.505084/In addition to the above Ive changed a few things since I wrote that post. Car now has a JNZ short shifter and new shifter cables.On the side to side cable adjustment, I...
When installing the front mount does the inner metal sleeve need to be removed? From looking at the size and the lips on the prothane it looks like it has to go, But don't want to remove it and not have a nice tight fit.
I have been trying to figure this issue out for quite awhile now,although now it seems I'm at a point where I need to ask for some help as im pretty much out of ideas/options to try. Heres the things I've tried to correct this issue,just like most everyone else who's had this issue.1) New...
To me seems like a waste of time/money etc to put that big of a wheel in such a small housing, but im not a turbo guru with flow and efficiency. Anyway thought it was a cool video. 35r wheel around 2:40
When installing this gasket would there be any negative side effects with wiping it down with a rag and brake cleaner? Just wondering as it has a dark gray paint of some kind on it around the cylinder holes etc, although it doesn't feel sticky like it some sort of sealant nor is it thick.
I have been reading up on this step and have found numerous information on it but none really say how you do it, just that you need to have the proper stretch for the bolt.
Moving on:
Im about to torque down my head with L19's and a Mitsu MLS using ARP ultra torque, Though I'm curious how you...
I'm in the process of freshening up some of my harness and my first area I'm going to do is the injector wires and new connectors I have all the loom and tape off, all that's left to do is run the new wires, solder etc. However when I got to the resistor pack female plug I ran into my issue. I...
Was wondering if anyone has had any luck in finding a replacement for this bushing?I've searched around and the bracket is discontinued and has been for awhile.
Looks like my transmission couldnt handle the power anymore,was doing a WOT run in 3rd when around 4500k, then suddenly the car instantly went to 7500k.went to pull it out of gear and it was a challenge but I got it. Tried to put it back in 3rd no go,then 4th negative on that as well, but i do...
Does anyone know if theres a suspension setup out there that's priced and have the quality thats inbetween JIC (if they still make them for our cars) and the muller/ohlins ones.
I'd like to upgrade my current setup "AGX and Prokit" too something much better but dont know if i want to drop...
Been trying to figure this little issue I have and was just wanting to know where another place to look in fixing it would be.Problem: It seems every 4 days to a week I have to refill the water in the car,the amount of water will vary I guess depending on how I drive the car for the week. I...
Well after years of not having A/C in the car I decided its just too damn hot to not have it here in Florida and its not even summer yet "must be getting old" lol,I went thru the whole car yesterday and changed every O-ring in the system seeing how some were from 1990. I didn't replace any parts...
Looks like our cars are really getting old.
Anyway on to the point,I found my coolant leak today, and its leaking right at the point where the main coolant tube and the pipe with the 02 sensor holder on it thats going towards the firewall/heater core are attached.I figured no big deal I'll just...
Yesterday did a leakdown test on a friends car yesterday and im not really sure what to make of it. After letting the car warm up to operating temperature put the engine at TDC, started test in cylinder #1 and at 10 psi of pressure i could hear air coming out of the dipstick tube,According to...
Need some places/ideas to look on this situation. I go to turn the key to start it and it just clicks so i turn it a few more times and same thing, then about the 5th time the starter turns the motor over and starts. Most of the time this is how it will start when it acts up, For the most part...
Hopefully those with a aem can confirm this, I have started the install of the 30-1300. I have all the other wires soldered in etc,I just want to make sure that the wire that im suppose to tap into for the MAP SIGNAL wire is correct.Is it true that the wire to tap is the stock ignition check...
Recently changed the clutch and need some ideas/suggestions as to what my problem is.First off I got the F/W resurfaced,new clutch,PP,T.O.B,New clutch master and slave cylinder,adjusted the clutch pedal. I have bleed the system multiple times so i know there is no air in it.Only thing i didnt...