So I got the 99 tank in and it worked. I removed the plate that the vacuum line plugs in to from the 95 tank and put it in the spot above the large filler neck hose. Connected the filler neck vent to the same spot the 99 connects to and plugged all the 3 hoses on the black box.Just wanted to...

I did alot. Got it running... I'm very tired now. New gas tank (old full of rust. by the way a 99 NT tank will work on a 95 gst lol) new fuel rail new plugs put the entire interior back in... goodnight lolSent from my PC36100 using Tapatalk

LulzSent from my PC36100 using Tapatalk

Awesome thank you. Looks like I could use this tank but with some longer hoses. I moved the vacuum vapor thing off the 95 tank over to the 99 above the big filler hose and I should be able to connect my smaller filler vapor hose into where it plugs into on the 99 tank after extending it. Ill...

Well I tried all of that before posting here. I'm not new to forums I just posted here because I can't post anywhere else right now. I cannot find any info on the 99 tank.Sent from my PC36100 using Tapatalk

I notice this 99 tank doesn't have a filler neck vent tube in the same spot as my stock tank. I'm not sure what to do this black box with three hoses coming out if it stumps me too I looked down into the tank and that black box goes almost to the bottom. I went through the service manuals for...

That doesn't look too bad at all. I'd say its worth it.Sent from my PC36100 using Tapatalk

Are you running a 1g fuel rail and pressure regulator?Sent from my PC36100 using Tapatalk

Same here lolSent from my PC36100 using Tapatalk

Amc is real lol orielly list 1ga as amc eagle http://en.m.wikipedia.org/wiki/AMC_EagleSent from my PC36100 using Tapatalk

Only awd tanks are plastic the inside of mine is rusted bad and I mean the whole tank. The 99 has some black box with 4 tubes coming out of it do I just plug those?Sent from my PC36100 using Tapatalk

I searched around and couldn't find an answer but I've got a 95 gst with a rusty tank and I picked up a 99 Fwd tank but I'm afraid there's some differences can I make this tank work? Sent from my PC36100 using Tapatalk

trade 95 talon tsi awd

Yeah don't trade for that. Definitely sounds fishy. Dsms are a dime a dozen on Craigslist but the good ones take some fishing to find.Sent from my PC36100 using Tapatalk

Yeah I did that delete on my rs turbo and it made the car more uncomftorable than it was worth and id say it only frees up 5-15hp. It probably frees up more torque than anything else.Sent from my PC36100 using Tapatalk

My neighbor around the corner from me has a sexy black one with some serious mods. It is a hard top too.Sent from my PC36100 using Tapatalk

That's different but look at the comments it started another Honda dsm war lol. So funny. Honda kids get so defensive so quickly.Sent from my PC36100 using Tapatalk

Are you talking about the round piece that attaches to it with the wire?Sent from my PC36100 using Tapatalk

Very nice. Just proves a properly set up and tuned stock 6 bolt can put out some serious power.Sent from my PC36100 using Tapatalk

My driver axle has the same issue but luckily I was only needing it out to pull the motor so I just left it in the car but the day I need to replace he axle or the bearing is going to be a bad day.Sent from my PC36100 using Tapatalk

Back when I used to play with 420a's I had a similar problem and it was one of the pullies that was worn out and had some play. Might wanna check those too.Sent from my PC36100 using Tapatalk

Hey now I work at autozone :-)Sent from my PC36100 using Tapatalk

Just hope it was never stolen and reported.Sent from my PC36100 using Tapatalk

Also wondering about the wiring myself.Sent from my PC36100 using Tapatalk

Get a frame with a title and swap it all over.Sent from my PC36100 using Tapatalk

Hmm while under the car reinstalling the t case (pulled to inspect) I looked at the front motor mount and the rubber is split through the thick part so I'm gonna go run and pick up a new one. Only around 20 bucks for me anyway ( I work at autozone :-) ) don't know if its the problem but it sure...

Well I've put the exhaust into consideration which is a possibility it just feels worse than that but I guess it is a 3 inch exhaust so anything is possible.Sent from my PC36100 using Tapatalk

U joints don't have any play just checked. Now the rear upper arm bushings are almost completely gone but I don't know if that would cause this.Sent from my PC36100 using Tapatalk

Transfer case is from the old transmission it is a 95 96 t case and transmission is a 96 I ran the vin on the trans and did the turn test on the t case to be sure.Sent from my PC36100 using Tapatalk

So I have a problem that's driving me crazy I've done endless searching and cannot figure it out. I am posting here because I don't have the posts required to post elsewhere but I am not new to these cars I just don't post a whole lot.I have a 95 tsi awd with a 6 bolt swap and I just put a new...

Where did you end up putting the flex plate spacer? I have heard this before and it ended up being a loose bolt. It could be many things really.

I'll be interested in seeing the finished product. I was thinking about doing this with some 2gb headlights since most projector headlights I have had for these cars are junk, except the set of APC's that I had but they were not HID.

Sorry to bring this thread back from the dead but I didnt want to clutter the forum with another thread and this is related to this post.I have tested my blower motor relay and it is bad. Blower motor is good I hooked it up directly to 12v and it works and then hooked it in directly before...