All the DSM's are in Renton? Lol.. There's plenty of us up North in Everett area. I know there's a decent amount near Tacoma area as well.

For everyone looking for the 2g injector pigtails, you can get them off earlier (94ish) Dodge Caravans, they are tucked behind the intake manifold so they don't see much heat and usually are mint.

Can you guys get just the front brake lines from Russell? I bought a kit from you guys and lost my fronts :/

It's on backwards. The coil should be sitting on top of the sleeve.

Yeah I'd say your right around 650whp with your setup. If your expecting more I'd look into the HTA3586 because 37lbs is taxing that turbo..

What fuel are you using? At 37lbs your probably at 650whp assuming your on E85. Lucas English put down 621@31lbs on a regular 3065..I just picked up a "82hta" myself with a .63 t3 housing, hope to have the car done and dyno'd soon!

Very impressive numbers for low boost and pump gas. I just picked up the Hta version so this definitely makes me happy to see such good results. Can you post the whole graph by chance ?

Prices?Condition on 2100?

I had the same exact issue once, it was the ECU.

Sounds like it has 90 shifter cables in it.I picked up a 91 one time that had the same issue once, I swapped the cables and base and it was fine. Some people say the cables are the same and that the bracket on the trans is different, but I changed it all anyways. I would start by verifying the...

What I did was just swap the harness over taking off all the 6mm nuts from the coil.

Here's a good write up I refer to when stumped.http://www.dsmtuners.com/forums/articles-miscellaneous/217951-how-diagnose-no-start.html#post152649702Good luck!

At first looked like a t04e50 compressor wheel, but it looks a little bigger like a Red so I'm guessing a FP Red

Haha you have more money in gauges than most people have into there cars.

When are you trying to get it done? I may be able to swing through and lend a hand!

Pacific Raceways requires a roll bar starting 11.49. Anything after 11.00 requires a full cage.

I have one, your more than welcome to come pick it up :) I am in Lynnwood.

He stopped making them since 4 days ago? Dang that was quick lol

Been searching for awhile but unable to find a shop close to Milton. I have a buddy down there that needs a trans rebuild for his 2g. Anyone know a reputable close DSM shop in that area?Thanks!

MOD / Mitsubishi Owner's Day! / Mitsubishi Motors

There is a Mitsubishi Day. MOD - Mitsubishi Owners Day.http://www.youtube.com/watch?v=gYcDFcHuHXI

Cant tell if troll or stupid

Yeah that's helpful..The point of ceramic coating the manifold is to keep the temps down under the hood. If I were you I would spend my money a little different considering your mods, like a 14b.

I've never seen a 16g with a vband o2. I would just remove the vband piece from the DP as it looks like it is just bolted to the DP, and install a 16g with a stock o2 housing.Looks like someone was in a hurry to get that turbo off, that return line they snipped was a nice one..

Ehh horrible picture quality sorry..

I really hope you don't trade that 2gb Talon for a Elantra. Fix the headgasket! I wish I lived closer I would scoop up that Talon in a heartbeat!!!

FD Love :)

For future reference I emailed Bullseye directly and they said:Max pres at the turbo should not exceed 40 psi, feed with #4 line and return with #10 or #12 when possible. Return should be well above the oil level in the pan and return away from crankshaft windage,preferably in front of a main...

That was definitely a 9 second pull...

My vote goes for FP Red. Im sure Jusmx141 will confirm though.

I bet someone had it propped up with a stick because of non working hatch struts and went to close it with the stick still in it.. Only thing I can think of.

That is way different. Someone just straight up cut a hole in the hood lol.

Good video!! Man it must be nice using air tools!!

I have a 90 GSX - Pretty complete minus motor/trans/suspension. The body is rough, however. And the interior needs a GOOD cleaning. $250

I would look into the ETS kit, they are having a sale for $499 shipped for there street kit which is an amazing deal.

No, 3 of the 2g motor mounts are on the transmission where as the 1g there is one on the tranny and the other 2 are on the block so it wouldn't directly bolt up without some fabrication involved, if even possible.

Damn dude your crazy that looked like a ROYAL PITA!! If you want I could possibly bring my cherry picker for you to borrow when that motor needs to go back in. It definitely will be harder to put it back in like that lol

Yeah they are up on CL, thanks!

My 92:My 90:

JNZ still makes one...JNZ Tuning Short Shifter (1G DSM and GVR4) : JNZ Tuning

Selling a set of 18" konigs, not sure what model but they look like Rota Subzeros they are great condition 1 rim has a 1inch section of curb rash. Tires are about 85 percent. 5x114. Will have pictures up in a bit or you can text me for them.$500 425.905.5059 Call/text/email

Last nights episode was kind of lame again.. But better than the last few.

How did this thread turn into a healthy food discussion lol.Cracked skull at 0:45 I bet.

Nice passes! I wish my Dad shared my DSM passion with me!

Yeah its slow for me too.. But its $499 for anyone thats wondering

drooooll.. Absolutely beautiful ! :thumb:

Yeah its because you live in PA haha. Come to Everett area, there are definitely some respectable DSM people around here.

IBL.I don't think he should be banned. The guy was expressing an opinion. Yeah, he could of handled it a bit differently but #### it, some people are assholes and it needs to be brought to attention.

Hah thought you were talking about people at the event. So what went wrong with the car at the end of the run Jeff?

Which car does Kevin drive?.