I'm curious as to what 4 port sealed catch cans y'all are running for this set up?
I can't really seem to find one that is 4 port and sealed.
I'm referring to the famous catch can wiki.
https://www.dsmtuners.com/threads/the-4g63t-pcv-system.366890/
Doing a boost leak test before I get back to tuning and intake side holds 20psi no problems.
But air is coming from the wastegate flapper?
If I hold back the actuator manually it'll stop.
I attached a short video.
Is this a bad waste gate actuator or something else?
I have a Hyundai style valve cover.
Powder coated and it looks really nice.
No Hyundai hardware, which you need to install.
The baffle has been removed on this one.
200.00 shipped
PayPal only
I read online of some one doing something similar.
I went to home Depot, got a plumbing 4" rubber cap it was like 4.99.
The 4" was closer to 4.5 inside diameter.
It fit my SRS exhaust tip perfect.
I took an old PCV valve drilled a hole in the cap and bolted it into the rubber cap.
Then I took...
I have a set of 2gb talon side strakes.
No broken tabs one of the small pieces had a crack in it and was repaired.
I tried to get I picture to show but it is hard to see.
100.00 shipped
1g fuel rails some have pressure regulators some don't. One of them has been cleaned up nice and one is a plastic style from a Hyundai.
15.00 shipped
If you need the plastic spacers I can send
some for free.
Any one else have any issues getting parts from these guys?
I ordered a DSM Fuel rail from them.They shipped me a EVO fuel rail by mistake.
So I called them and they said just ship it back with a note and we will send you the DSM fuel rail.
I sent it back (at my expense) with a note explaining...
Can I install a nipple in place of this plug on the 1G intake manifold, as a source to hook the line going to the MAP sensor?
I searched but I couldn't find info on this source.
This is on a friends car.
1997 Talon esi 420A automatic
I swapped in a used transmission 1-3 work good, so its not in limp mode just no overdrive.
The overdrive off light doesn't come on, on the dash.
I tested the overdrive button and it is working.
But I'm not getting voltage at the orange and...
So I already have a thread on the ecmlink forums.
But I know more people are on here and I would like to try to get things going again.I was able to get my idle and cruise done.(with some help)
But now it intermittently won't connect to link or it will stop in the middle of connecting.
When it...
Doing a boost leak test before I attempt more tuning. It seems at about 15psi my BOV is opening. Does it mean the diaphragm is leaking? Or is it possible I ran a vacuum line wrong?
So I have a early 1992 AWD with a 6 bolt and the older style transmission.(3 plug TCU)
I have a spare transmission that came out of a 1994 AWD.
But I didn't notice until I went to swap it out that the plugs are all different.
Can I just swap over the parts, so I can plug in this new...
I am doing a timing belt on a freinds 1g and he has these AEM true time adjustable cam gears.
I'm not sure exactly how to set these any help would be awesome.
I've done a plenty of timing belts but these things are making me nervous!
My road surge shift box came with instal instructions, but they are for a 2 plug TCU.
Does any one have the instructions for install on a 3 plug TCU?
Basically I just need to know what wire to use for 12 volt power and what wire for ground?
Can the shift box be grounded to chassis instead of...
This is on my early 1995 2G 420ASo my 2g has had a lopey rough idle for some time now and I'm tired of it!
It will fluctuate from about 757 to 979 RPM's and the logger is showing 8.2%
Other than the idle the car runs great.
I just checked the TPS and I can't get any reading off of it just...
I noticed that some of the Avenger's have a oil pressure gauge in the cluster.
If it was swapped to a 420A car would the oil pressure gauge work?
Here is a picture of the cluster in mind.
What would cause this?
This head was rebuilt only 2500 miles ago.
I was going to put some new valves in the head this week end.
But I decided this cam cap is way too messed up to try and reuse this head.
Now I guess I'm going to have to order another head...
But why would this have failed so...
Does any one know is a Mitsubishi FTO steering wheel will bolt onto a 1g?
I've searched and found nothing.
I'm looking at buying a FTO wheel in good shape, I just want to know if the splines match?
Thanks.:thumb:
Just tossing around ideas in my head and was thinking how could I make the ugly shifter in my 1G look better, but still retain an OEM look?
3G shift knobs in the automatic look pretty nice, but the button is on the side instead of on top.:hmm:
I can't seem to find a diagram on how it works...
Picked up some 1g dark grey leather, front/back seats and door panels.
Got a pretty sweet deal on it.:thumb:
It is in pretty good shape for being 20 years old.
From all the DSM's I've seen leather seems to be pretty rare.
It does look black but I posted the picture from the door panel to...
I just put a new head gasket on and it wasn't smoking any at first.
But it started to smoke, like a lot of white smoke.
I thought the turbo was blown, had Justin rebuild it for me.
(It was blown) but now the car still smokes until it gets all the way warmed up.
I put a used low mile head...
I saw this today, it is a TSi.
The car is beat down so probably no one will want it.
But it might be a cheap way to pick up a 6 bolt block or other drive train parts.
It is #12 on the list.
Grubstake Auction Company - Anchorage Alaska - Auctions in Alaska
Looking here at the list color codes.
http://www.dsmtuners.com/forums/appearance-interior-exterior/166242-paint-code-help-color-code-codes-paint-code.html
But 92 Talon isn't listed, only laser is listed.
I'm trying to find the paint color for my 1992 tsi, with a 1991 build date.
Here is a...
I just got frustrated with my compression test yesterday and pulled the head.
I had 50,50,75,50 across the board.
I did find silicon on every one of the head bolt threads though!
Probably gave incorrect torque readings.:aha:
The funny thing is the dealer ship did the head gasket on this before I...
How many of you have the OEM floor mats in your 1g?
It seems like every 1g I come across is missing the OEM floor mats.:confused:
I've seen them in plenty of 2g's, but it seem they are very rare in a 1g!
I'd also like to know what color the OEM floor mats should be, in a red interior 1g?
It is about time, I've been waiting for them to drop it!:hellyeah:Mayor calls for end of I/M program even before deadline: Anchorage | Alaska news at adn.comEPA agrees to end Anchorage emissions testing program: Anchorage | Alaska news at adn.com
I had to swap out my ECU, no biggie right?
Nope, the bolt that holds the ECU was stripped and the ECU was stuck!!
I had to cut the bolt to get the bad ECU out!:ohdamn:
I managed to cut the bolt with a dremel without damaging anything.
My question is, can any one give me the measurements of...
Ok well I had to replace my alternator about 3 months ago.
I just got a cheap o'reilly's alternator and reused the same belt.
I haven't had any issues until last Friday.
After about 20-25 minutes of driving the battery light is coming on.
Then my temp gauge starts climbing, while I have a load...
I got this weird dual exhaust, I pulled it off this parts car.
I haven't been able to find any pictures of anything similar.
Not going to put it on my Talon, it just looks too goofy to me.
Thought I see what y'all thought about it.
I just got in my gaskets and o rings for my throttle body.
Am I missing anything, for my throttle body rebuild?
And am I supposed to grease the o rings before installing?
I just wanted to make sure I have everything, before I pull it apart.
This is on my 92 Tsi.
The biss screw o ring is in the...
I have a real quick question.
I have a 92 tsi automatic, I want to swap in some 450cc injectors and a 5 speed ECU, but do I have to swap the FPR also?
Some threads say yes, some say no?
Or would it be better to hook up this MAF translator and set it to 450cc?
Thanks
I'm trying to find some 1gb amber corner lights.
E-bay used to have them, now I can't find any.
Any one know of a place that still sells them?
Here is a picture of what I'm looking for.
So I traded my Motorola Atrix and my RE MX 15" subwoofer for a 92 Talon Tsi AWD!:hellyeah:
Motorola ATRIX 4G - dual-core phone - Android smartphone - Experience - Motorola Mobility, Inc. USA
RE Audio MX Series MX15-D2 15" Dual 2ohm Subwoofer | ShipSound, LLC
^Links to the items I traded for it...
I need some redline MT 90 for my transmission.
Is there any where in the state I can pick some up at?
I haven't been able to find any...
Shipping on 3 quarts cost as much as the fluid!
I just got my new clutch and Findanza Aluminum flywheel installed on my 90 tsi.
New parts installed flywheel,clutch, pressure plate, slave cylinder, stainless clutch line.
It started up just fine and it will drive, but if I give it any more than just a little gas the engine just rev's up and...
Ok so I just picked up a palm m130 and I want to use it for logging.
This is on my 90 tsi.
But honestly I have no idea what I'm doing...
I read on this chart here that my palm will work.
http://mmcdlogger.sourceforge.net/#Palm%20Support
I'm not sure which cable I need to buy or which software...
I have a simple question.
Do I need a flywheel tool to install a new flywheel?
I'm looking at these here.KD TOOLS 2270 FLYWHEEL TURNER NEW UNUSED | eBay
Bottom-line pricing on Lisle 23800 at ToolTopia.com
I'm asking because one I don't have an impact and two when I searched nothing came up.
I'm going to instal this light weight Findanza flywheel, on my 90 Tsi.
After searching this I feel I'm getting mixed results.
I ordered some ARP flywheel bolts from DSMgraveyard, they sent me a 8 bolt package that says toyota.
I guess these toyota ARP flywheel bolts, is what is used on a...
Gotta love DSMgraveyard....
DSM Graveyard - Your #1 Source for DSM Parts!
ROFL
Here is the picture from the site, in case they change it.Yet another reason I don't buy parts from them anymore.
Well summertime is right around the corner!
I was wondering if any one plans on meeting up, this summer?
On the first I'll be able to drive my 2g.:hellyeah:
Pretty soon I'll have my 1g on the road again too.
I have two more people with DSM's, lets try and get as many DSM's together as possible!