Wheels and specs Just not sure on offset +28 or +38 for the 17x9 on 255 or 245'sDrag Wheels. Extreme Alloys. | DR-31 LIMITED EDITION (17x9 / 18x9)I have been doing tons of research but on a 245/40/17.Firestone Firehawk Wide Oval Indy 500I am on full Polly bushings with Tokico 5...
You can vent it just plug the recirc pipe :) Your car will run like Shit.... It will run rich, stall, idle lumpy just will sound cool I guess... If thats what ya want then go for it.
You should not be able to move the clutch fork but forward, back unless it came unclipped from the TOB also it might have came off the pivot ball or something broke like your fork or TOB. You are going to need to pull it.... I am 100% sure to make sure you fix it right.
Do you have a real wideband??? Cause a Auto Meter Phantom A/F Guage is a narrowband and is just useless from what I have seen.A real wideband is AEM, Innovative, etc.. A real Wideband uses its own O2 sensor.From what I read you don't have a real wideband you have a light show that does...
I know this ain't a All-trac forum but this is my buddies here in roy utah. Its a ass puckering ride made over 700 awhp custom almost everything gt42r e85 4 inch exhaust 36psi on a Hydra nemesis ecu. Last I heard he was 2nd or 3rd Highest HP Celica GT-4 in the US or world I can't remember. Guy...
I would start with bleeding the system as for clutch forks I am not sure if they are diff. But I would have someone come out and push in the clutch while you watch it see how much it is moving also see if the fork is hitting the tranny.If that ain't it check your clutch pedal assem they wear...
I would check for boost leaks they will cause you to run rich. But is the car driveable like have you taken it out and tried to do a pull? Cause if you get lots of black exhaust and it drives like shit and can't get it to boost I would say you have a Boost leak but I would check and go from there.
Is it Bar or is it Kgf/cm2?? My Greddy is Kgf/cm2 which is a little less than bar....1.0bar is 14.5psi.... 1.0 Kgf/cm2 is 14.22 psiI don't see any mods in your mod list if you are on the stock t-25 i wouldn't go past 16psi which is 1.103 Bar or 1.125 Kgf/cm2... Cause past that they blow...
I have ran nothing but dejon with the 4 inch straight through and I love it was a killer price and awesome fitment and quality.Will never pay 500 for a cat-back ever again when you can get a whole system for that :)
One in the right is a 14b the one on the left is a 16g or a big 16g. :DYou can tell by the 6 blade staggered fins on the compressor side 16g and 14b all the blades are the same so I guess you lucked out by the kid not knowing what he sold. :thumb:
I am looking to build a 2.3L. I was putting a G4CS crank in my 4G63 but I can't get one all I can get is the G64B cranks now is that the same crank? Also are those the only 2.4L 6bolt cranks that you can drop in a 4G63?
I Have a SBR GT-13, 272's, PTE 780cc inj, stock HPC coated 1g intake mani, a Keydiver chip, and a POS Fmic and on 24psi. I spun from 40-60mph just mashing the pedal. Also I am AWD so it was pretty crazy slidding sideways on a freeway on ramp and people are just stare its all good. :DI just...
I don't know man 50miles after my rebuild mine was 130 all the way across. But i also have 272 and with the over lap I have heard it will read about 30-40 psi lower not sure though. :thumbdowngood luck :thumb:
I have a GT-13 it hit 20 psi at 4500 in 5th. :thumbdown But i also have hks 272's :D and with the overlap on those puppys is a kicks you in the nuts. But at 5k it hits hard as hell and pulls all the way to redline. It doesn't level off like stock cams. Boostinawd drove it and with some toulene...
Anyone ever heard of ghost pedal? My best friend 95 tsi did it its were the seal in the master cylinder wears out and fluid slips by it when you push it in. Because 2g have a assist spring. Which makes for less pedal effort but if you pull it back out it will go back down because of the assist...
I have seen about 4 Venoms completely blow out the welds at 20psi. I have yet to see a problem with the magnus's around here. There are several people who run 28psi and havn't broke anything. But the one i sent back to them had a hole in the weld and the didn't have the throttle cable mount. I...
Thats odd i have Order 3-4 times from them and its shipped out the next day and the product kicks ass. I have see stuff like that happen my buddy order a clutch fork and pivot ball from DSMotorsport and it has been over a month and he hasn't seen it and i have ordered from them and never had to...
Sounds like you might have low compression or your turbo is going out cause everyone that i know can build boost in nuetral except the kids with low compression. I could build 15psi on a 6k launch and my stock bov was loud a shit but i don't know now because my car is not running but even with...
I got mine from slowboy and there nice i like them alot i havn't had anyproblems its seems too run smoother. I don't miss fire ever as for hp its seen upwards of 10hp just because more precise firing, hotter spark, less resistance and a coil for each cylinder. The slowboy set up come with a plug...
IMO i would run Synergyn Syngear2. This speaks from my encounters with Awd Tranny's.
I have had 6 tranny's this time i went TRE. I have tried GM Syncromesh,BG Syncroshift,Stock Mitsu Tranny Fluid, Penzoil Syncromesh, Mobil 1 Synthetic Gear Lube and it claims race proven, and Synergyn Syngear2...
Yeah it will feel like the clutch is slipping because your not puting all the power to the ground. You have drive train loss and all the friction so your car works really hard to put nothing to the ground but it not slipping. My tranny didn't either but when i popped her open shit was every...
Take your car to a local tire shop and tell then that the studs are spinning freely. They will drill them out and if the screw up your hub or wheel the have to replace it. Well at least up here they do. I did it to my rear Driver side wheel and it took them like 2 hours to get 2 of them out and...
You Blew your center diff and if you keep driving it the chunks of the gears in the center diff will go through the tranny and you will break the tranny. I did this but all i was doing was a 3rd gear pull on a 14b at 10psi and i heard a loud pop :rolleyes: and i went to flip a u-turn and my ass...
IT almost sounds like your Harmonic dampener went out. Mine did that and ate my A/C belt first then it ate my alternator belt so check your harmonic dampener. Your lights come on because its stops pumping water and stops charging the battery and that the reason you are overheating. So check the...
I am 19 I bought my 93 AWD 2 Years ago on august 27th now i have 3 and none Run till next week then 2 will and one will be sold look at my profile and you will see how much modding i did on the 93 awd all has been in the past 3 months :D I just got layed off ON tuesday :barf: Damn DSM's :talon:
Ok you can go the easy way. Go to a Get the front water pipe off a 1g, get the oil feed and return lines off a 1g get a plug out of a oil filter housing and pull out your t-25 feed line and put the plug in there. They are 6 point alen wrench hole in the plug. Get a bolt to plug the hole in the...
Ok i just got my car running a week ago. I put in 6bolt with 95 pistons with 5k on the rebuild. When i pulled the motor it had never knocked in my other car. Well i put it in with a New Knock sensor,o2 sensor,GM MAFT, FMIC,Tial BOV,Walbro 255hp,780cc inj,and a Keydiver chip to Adjust for the...
My personaal opinion a 97/98 tsi :talon: are tons better looking than eclipses but 95/96 all you need to do is get the 97/98 spoiler and bumpers and side skirts don't go eclipse there are to f#%king many!!! Talon all the way!! :thumb: :talon:
its your ecu my 91 did it get new caps my 91 would shut off and get a check engine light then it would turn its self back on and the cel would turn off and never logged that a cel was on but i didn't smell mine till i drove it one day with my radio out of the car so the ecu was right there and...
K i am new to datalogger. I am just kinda wonder what my tps, timing advance should be and why do i hit 45*tima when i let off the gas?Here is what i am putting out at idle.
Rpm: 937
Knock:0-3
Tps: 10.5%
Tima:12*
Coolant:213.1*F
FTRL:139.8%
FTRM:100%
FTRH:100%Here is what i am...
if i was you i would just go for a sbr gt12 you can get it in 50 56 or 60 trim internaly or externaly gated there dual ball bearing there just sick they spool pretty quick they are kinda pricey but there awsome my friend has one on his 90 at 18psi and he lit up a 2003 zo6 that are 405hp and he...
Welcome to the world of dsm's hate to say it but one you start tinkering you will never stop having problems my clutch went out 1 month after i got my car and nothing but problems since well just the damn tranny but now that thing is so screwed i have no 2nd or 3rd and almost no 4th hopefully...
check your upper and lower intercooler pipes because my upper blows off and does that idels fine and revs fine but it kida sounds like a honda with intake but when it blows off when your going it spudders even with a small leak and watch behind you when you go if your blowing black smoke then...
Damn someone knows welcome to the world of dsm's colby you hang out with me and tyson something is bound to break look at his car and look at my tranny and that 1st gear boost problem whats next you know
I have a Question ok the mbc is set at 17psi it runs 10psi in first and the wastegate won't open and it scares me but in every other gear it runs 17psi its really weird i have no clue what the heck it going on and it pisses me off but if i turn the mbc down to 10psi it runs ten in every gear and...
My Friend that bought the 92 awd talon, has got a prob. in the rear end. heres the insight on what happend, we were drivin down the freeway bout 75mph and the rear end started wining really bad then about 30 secs later it started to smoke extremely bad. so we pulled the car off the road and...
my friend just bought a 92 Talon awd and wants to remove the ABS the RIGHT WAY so that it works right. can't have it done wrong. any info would help
Thx
I just had that problem after putting my car back together and i mixed up instead of 4123 for the firing order i had it 4321 and it did that 4 is closet to the block 3 the farthest away
I just had that problem after putting my car back together and i mixed up instead of 4123 for the firing order i had it 4321 and it did that 4 is closet to the block 3 the farthest away