I recently tried to install my Southbend Kevlar dic w/ ACT 2100. But my stock flywheel was resurfaced causing the kevlardisc not to engadge. Is the flywheel new? Step height is importent.
This is an Idle Only log. Just got the car started a couple days and just a few hours ago I started it to get it going.For those who don't know. It's a 2.3L with 5031e, FIC650s, 3" GM Maf, 2.5in IC piping. Fuel Pressure set at 42psi, 255 wally...anything else you need to know just ask.I...
Ok. So I have a completely dead car. The Battery is good. Checked all grounds. Checked for corrosion. Replaced all fuses with new ones under the hood and inside the car. Still No Power at all. But today I tried something. Here it goes..I took a regular 16 gauge wire placed one end onto the (+)...
So this thread got jacked... but i'll agree with SOAD even though I'm not boosting 32psi..I've seen to many DSM's with 600+ that have stock 1g or 2g IM. You'll be fine. No need to spend the extra money, depending on your HP goals.
This is all I have left.2g Complete TAN Interior. All panels. (No door panels or front seats) Back seats. Clean. $50
2g Turbo Wing (white) *Mint* $80 FIRM
2g Tail Lights $20 FRIM
2gb Rear Bumper $20!!! NEED GONE!
2g Turn Signal and Wiper Switch $10 ea.
7-Bolt Oil Filter housing $20
2g Greddy...
I want to see how clean can the spyders really look. Post some pics! I've never really paid any attention to them because I own a coupe but I just picked up a 97 Spyder last week! I've been always down talking driving a convertible and now i'm going to be driving one. A manly one thou! I'll be...
Unfortunately I don't. They were not in the car when I picked it up. I only have my Poly Mounts that I will be using for the swap. If I do happen to come across some I will be sure to let you know.
I've been 2.3 for about 4 Years now and If your building a street car or a Race car its all positive. You can crank a hx-35 on the street and have the extra displacement to make HP for the track.64 Crank
H-Beam Eagle rods
Wiseco HD Strokers
ACL race bearings
ARP everything.I vote 2.3.
2gb Rear Bumper $40
2g Turbo High rise wing. *MINT* (white) $100Need all Gone!
754-224-9674 WillI'll be posting parts for sale as I continue this project.
You would have heard a "Cow Bell" type of noise once you sqeezed the clutch in. Then again a 6-Bolt. Not even the Late 7-bolts (Split Thrust Bearing) blocks crank walk. You may have a different problem.
Damn and I live down south too. He might go to all the meets as well. Crazy. But like they say on creigslist about scammers 3rd Party websites as transactions SCAM! Money Transfers through Western Union SCAM!. I feel bad because thats only 5-7 of you on here...I know he got a bunch of Honda guys!
One thing I can say is that is a Great 297whp! You can clearly see how much more potential the car has. Nice job.I've never been to the dyno yet so I can only imagine how that feels.
If all you want is 450ish Yes Cams and a HX-35 will get you there. Better off staying pump gas imo. Like everyone else is saying 450 is easy to achieve but RESEARCH so you don't end up skimping yourself. But other then that you look like your on the right path. Just remember, there are always...
I'll add myself aswell to the group. I've yet to make it to a miami DSM meet. Everytime my car was under the knife. Now I crashed it and another DSM is under the knife.
Revenge Power...441 just past Stirgling 954-983-9737Its a V8 shop so he's a little bit of an asshole when it comes to us 4 bangers but he's a good guy. I went here to get my block hot tanked, bored, honed, and my piston rings trimed for $140!
Not sure if the Speed sensor is in the tranny that i will be recieveing or if it is one..will it work. The motor itself is not runing but i was told the tranny was ok. I will let you know ASAP!
Lmao! They got you bro. But I cant be mean. It's just there are way to many factors for "us" to get a good "Guestamation?!" But i'll tell you this...stock 2g Maf... 450whp might not look to good. but then again...I really dont know.I wish I was a proven member sometimes but I guess I dont...
Thanks again bro. I'm getting the shell in the AM so I can get this project continued.***I will be recieving a 7-bolt motor and tranny with the car that I will not need and do not have space to store it so if someone wants/needs a 7-bolt motor and FWD 5-speed tranny... $400***
Prices that I paid.**UPDATE*** 8/7/2011I found a Shell..so I will be swapping my motor, tranny, and anything else that is necessary. Therefor i will be parting out the car. Already started...(Evo 8 ECU Sold)..but once I complete the swap..come grab whatever you want/need that is left...
How do you all feel about them? A buddy of mine has one stock turbo w/ Meth injection, and COBB and we pulled on an e92 M3 with a "tune" (according to the driver)! Power to Weight i know..but the MS3 has yet to fail.
I'm not an expert on the 6-bolt motors but is it a L shaped hose. If so you can go to your local auto store and pick up some Heater hose the same diameter until you can Order the OEM hose that is pre bent. Unless you have a local Mitsubishi Dealership with a Parts Dept. But you still might have...
Sam's Club. Yeah I wanted to but...shit happens.A friend of mine is willing to take out the Motor and Transmission for me because I have a broken wrist due to the accident. So I'm wiling to let go of the Complete Long Block (Head and Bottom end), Transmission, Full Wiring Harness, Motor Mounts...
It is. If you see the car you would understand why I'm looking for 3k.But this Saturday is the due date. Anyone else that wants to make offers. make them now. ASAP!