The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support STM Tuned

Search results for query: *

  1. beansblacktsi

    Punishment Racing closed?

    Does anyone know what is going on with Punishment Racing. Trying to warranty an exhaust manifold that I purchased from them because of bad welds that have cracked. They aren't responding to emails, phone calls, facebook messages, and they just deleted their facebook page today. Getting pretty...
  2. beansblacktsi

    New numbers and video! T/S 60mm Hx40

    Well finally finished up the new motor and made it to our local heart breaker mustang dyno! New motor setup is just 10.5:1 Wseco pistons with Manley Turbo tuff rods, good valve springs and delta 272s. This was all done on a 7blade 60mm hx40 with the t4 twinscroll. Car ended up making 547hp at...
  3. beansblacktsi

    TX2K14 March 13-16th 2014

    Any other dsm's going to be down there again this year? I finally just got my car done so I will be making the trip from Nebraska! Hope to see some more dsm's this year!!<iframe width="560" height="315" src="//www.youtube.com/embed/OVAU0O8D7yM" frameborder="0" allowfullscreen></iframe>
  4. beansblacktsi

    The purple turtles fb page

    I made a page for my car on facebook so I can give updates and call people out. check it out!https://www.facebook.com/pages/The-Purple-Turtle/586150094789793?fref=ts
  5. beansblacktsi

    Pounded rod bearings and main caps walking on fresh motor

    Well I had my local machine shop build a 6bolt for me. It is just a standard Wiseco/Eagle setup, stock crank, and ill have to check what bearings were used. They did all the machine work and assembly of the rotating assembly along with balancing the motor. I installed it and broke it in just as...
  6. beansblacktsi

    10.15@134 Holset Hx-40

    Well I finally was able to make it to the track this last weekend and Im simply amazed! This was all done on some Precision 1000cc injectors on e85. They are really limiting my setup but will be changed out this winter! These passes were at 30psi with about 18 degrees of timing up top. First...
  7. beansblacktsi

    Finally got my ten! Bolton Hx40

    I took my car down to supra nationals in Houston Texas and finally got my ten!! This is a new setup and Im slowly working out the bugs! I barely got her done in time. This was at lower boost around 33-35psi and 18 degrees of timing. There should be a lot left in the setup, but we will see this...
  8. beansblacktsi

    Holset hx35 BEP machined to fit hx40

    Im currently running an hx35 with a bolt-on housing and it has been a great turbo but I just have the itch for more power. I have an hx40 laying around and I want to put it on. So my question is can the hx35 BEP housing be machined to fit the hx40 wheel? From research it looks like they are the...
  9. beansblacktsi

    Head Gasket issue

    Well the other morning I fired up the Laser and it was smoking a bit. I thought it was just from boost leak testing it prior because that sometimes will cause it. So I drove it around the block and it went away. All seemed well so I parked it. That night I fired it back up to go out and it was...
  10. beansblacktsi

    Name this part!

    Well I can't believe I have to ask this but I have a washer/spacer left over after messing with my trans or at least O'm pretty sure its from my trans. I replaced the end clutches, welded the center diff, and took out the viscous coupler and after I put it all back together I had this washer...
  11. beansblacktsi

    What I found in my pan.......

    Well this is a used trans I picked up awhile ago and ran last season. I never had any issues with it and everything seemed to work perfect as it ran consistent low 11s. I was working on welding the center diff and while I was trying to pull the viscous coupler out I had to drop the pan to pull...
  12. beansblacktsi

    Very strange ignition timing problem

    So lately I have been having a hesitation/stutter/miss problem with my 92 Eclipse Gsx. The miss happens when there is high load/low rpm but will go away if you get on it or go into boost. I have tested and replace the basics. But last night I was trying to set the ignition timing and when I...
  13. beansblacktsi

    Slight miss at idle/ sputtering until in boost.

    First off I have searched for this with no luck. The car I am working on is a 92 gsx. I have been driving it around for the past month and I have had zero problems until driving it yesterday. The car fires right up and runs and idles great. The problem I am having is that at idle...
  14. beansblacktsi

    Car wont crank over and fuel pump wont turn on

    The car is a 92 gsx originally an auto car but I stole all the auto parts for my Laser so I put all the manual parts on this car. The car was sitting in a field for 5 plus years before a bought it and before a tore it apart I hooked a battery up to it to check compression and the motor turned...
  15. beansblacktsi

    New Best time after switching to Auto!

    My best 60ft was a 1.700 and if I tried to leave on any higher boost it would just spin! So there is alot of improvement to be had in my 60fts. Next season the car will be out on slicks, new head gasket and a tune to shoot for 10s! Auto FTW! The only thing wrong about the video is i didn't...
  16. beansblacktsi

    Strange Head gasket problem

    So lately I have been having a problem with my head gasket I believe. Its a stock felpro with arps. The head was not resurfaced when put together but I did put a straight edge to it and seemed good! The problem Im having is I'm losing coolant, not much but it is losing some. I have no visible...
  17. beansblacktsi

    leaking some atf

    Well I was just wondering if anybody had any ideas before I tear it apart tomorrow. Its on an awd auto and its leaking where the transfercase meets the trans. If I let the car sit while running it wont leak at all. But once I drive it it will start leaking quite a bit. A good steady drip. So I...
  18. beansblacktsi

    Weird wear on one of the cylinder walls(PIC)

    Well the motor is a built 2.0 with eagle rods and wossner pistons .020" over ceramic coated 8.0:1. The motor has about 8000 miles on it and doenst burn any thing or smoke at all and has 160 compression across the board. But when I pulled the head in one of the cylinders it has this wear: Does...
  19. beansblacktsi

    Manual to auto swap problem

    Well I just finished the swap on a 92 awd and the motor turned over freely, and when I cranked it with the starter it also spun easy. But as soon as the motor fired up it locked up and died. I cant turn the cranks over at all. I was wondering what could of locked up in the trans to cause this...
  20. beansblacktsi

    Few problems with a 6bolt in a 2g

    Well Im posting this for my buddy. He bought a 95 eclipse GSX with a 6bolt in her but the car didnt run. It has the conversion wiring kit on it and two of the plugs were switched around. So we got it to start but it would barely idle but it did idle. But when you give it any gas at all over...
  21. beansblacktsi

    Oil pump went out...

    Well after racing last Friday I noticed I had a decent oil leak coming from the timing side. Well I pulled everything off and noticed that it was coming from the oil pump gear and then I realized that the the gear and shaft had alot of side to side play. I took the front case off and sure enough...
  22. beansblacktsi

    Two-step problems

    For awhile now I've been having some problems with my two-step, Im controlling it through EcmLink. The problem I'm having is right when the car is fully warmed up I two-step and it usually works like normal but then after awhile of driving I will try to two-step again and it is much faster at...
  23. beansblacktsi

    Need help please look at the pitctures.

    So I have a jays racing alt. relocation kit on my car with a gm alt.. And i recently noticed that the belt is rubbing on the motor mount. I don't ever remember this happening in the past. If you have any ideas please let me know!
  24. beansblacktsi

    Finally took my Laser to the track!!(video inside)

    The weather finally cleared up enough!! This was done on a stock motor, stock head gasket from factory, stock head, and stock trans! The turbo Im running is a Td05 20g. There was alot left in it but my trans was hating me and not letting me bang gears but Im very happy with my trap speed:) and I...
  25. beansblacktsi

    My 20g results on stock motor laser.

    Went to the dyno the other day to get my car tuned. On my 23psi tune it put down 364hp and 335tq. On my 30psi tune it put down 376hp and 392tq.Details on my laser: It has stock motor and trans with 145,000mile on it with stock head gasket from the factory with arp headstuds, it has a...
  26. beansblacktsi

    Video of my 16g Laser at the Track.

    I have been meaning to post this for awhile but this is my 12.23 at 113.75. I Could of probably got it down to a 12 flat but they closed the track early but Im still happy with my times. This was all done on stock 140,000 mile motor with factory head studs and head gasket, stock head, stock...
  27. beansblacktsi

    Noob with a long intro and with pics!!!

    Well I figure I should introduce myself since ill start posting more on this site. Everybody calls me Beans Im 18 and got my first dsm when I was 17. It was in horrible shape when I bought it. Its a 92 Laser rs 6/4. I was bored and did a full wire tuck on it and painted the engine bay. Its my...
  28. beansblacktsi

    Two pictures of my laser

    Sorry I know its really dirty but tell me what you think so far thanks.
  29. beansblacktsi

    Just some Pics of my freshly painted engine bay

    I finally got my engine bay painted and wanted to know what you guys think of it?And heres a pic of what the car looks like.
  30. beansblacktsi

    I cant figure my car out. Please help!

    well I have a 92 Plymouth laser rs with walbro 255, rc550s, aeromotive afpr, and I have a stage III key driver chip. With just the pump, fpr, and chip the car ran great just like normal. But I then installed the injectors and now the car wont idle and at about 4000 rpm in any gear it misses very...
  31. beansblacktsi

    Car runs like crap when warmed up

    Okay so I have A 92 laser awd. The problem Im having is that my car runs like crap after it warms up. When I first start it it fires up right away and then Idles fine and doesn't smoke out the tailpipe but when the engine gets to normal running temp it starts smoking bad(gray white) wont idle...
  32. beansblacktsi

    I have fuel and spark but still no start

    Well I just got a chipped eprom and put it in the car and it fired right up. But today I put in the clutch wire, stutter box, in and now when I try to start it it will turn over in the engine bay fine but sometimes on th eon position I can hear this clicking sound and can also hear that by the...
  33. beansblacktsi

    Clutch adjustment problems

    Okay I just installed a rps stage3 6 puck in my 92 laser awd. I put in a new oem throw out bearing, clutch fork, and pivot ball. The problem is When Im not applying pressure to the pedal the fork is touching the pressure plate. IVe bled the system plenty and was wondering if I could fix this by...
  34. beansblacktsi

    Weird boost leak test

    I did a boost leak test today because just replaced a few gaskets and it will pressurize to about 5psi and then the cam gears start to spin (but really slow) I stopped as soon as I do this and right around the cam gears theres a little air leaking around there but no where else. Is this normal...
  35. beansblacktsi

    Valve cover problem

    I have a 92 laser awd, About 3 months ago I replace the valve cover gasket and about a month later I noticed oil was everywhere on the passenger front side of the engiine capartment, so I was pretty sure it was the valve cover gasket right at the halfmoon. So since it was a new gasket I just...
  36. beansblacktsi

    Brake problems

    Well my car sat for a good week because I had alot of work to do on it, and its been below freezing at night. The problem I'm having is that my brakes are locked up, I know its a common problem for the parking brake to do that but even when I don't have the parking brake up and it seems more...
  37. beansblacktsi

    Need help quick, I got pics

    SO I have a 92 laser awd with no abs and I have a big leak right at the brake master cylinder, [/IMG] [/IMG] Its leaking right at the bottom of the flange right where it bolts up. Does this mean my master cylinder is bad or is there a seal right there I need to replace. I would just like to...
  38. beansblacktsi

    Master brake cylinder leaking

    My 92 plymouth laser awd started leaking some brake fluid about a week ago but i diidnt find out until a couple days later because i thought there was just some melted snow under neath my car or something like that. I never noticed anything different with my brakes but today I noticed a big...
  39. beansblacktsi

    Coolant Temp problems, pics

    I have a 92 laser awd. I'm really sure the coolant temp sensor is going out because the car will fire right up when warm, but now that it has been cold, it wont fire for about 5-10 minutes and now its getting worse because its colder. So I went to all the local parts store and they all have the...
  40. beansblacktsi

    Strange boosting problem

    Well i have a 92 laser awd, it has the 14b, mbc, exhuast, boost guage and airfuel guage. The problem im having is that my car will hit only 10 psi and in second it will go right to 10 and thenslowly creep up to 14 at higher rpms. Ive tried turning the mbc up and down but it doesnt change a...
  41. beansblacktsi

    Vertical shaft play please, searched and didnt find much.

    My buddy just gave me a 16g turbo for free. It only has about 800miles on it but the thing is it has vertical shaft play, its not just a little its about quarter of an inch. I was just wondering what could to fix it and how would something like this happen? Thanks
  42. beansblacktsi

    boost problem please look

    Well i have a 92 laser awd, mods are 2.5 exhaust w/o cat, manual boost controller, 255 fuel pump, free mods and thats it. Ive tried planning with the boost controler and it will always stay the same when wide open in first at 10 psi and in second onece i get into higher rpms it will slowly go...
  43. beansblacktsi

    New problem please help

    WEll i have a 92 laser awd with a small 16g and manual boost control. When driving it at full throttle it will boost 10 lbs but when i go and keep it right before full throttle it will hit 14-15lbs. Is this a sign of boost leak or what is it? thanks
  44. beansblacktsi

    92 laser awd not running right.

    Like the title says i have 92 laser awd turbo and my problem im having is when i try starting the car when cold it takes 2-3 cranks for it to fire and the check engine light is on. other than that it runs great and will start good after its warm. It just started doing this after a put a brandnew...
  45. beansblacktsi

    92 laser awd problems

    im thinking about buying a 92 laser awd and first off the car has a rebuilt 6 bolt motor, and it has 15,000 miles on it with 2g pistins, 2g head, balancers removed an stock rebuilt turbo. When i was driving it i noticed it was running rich i believe becuase it was some what backfiring, then its...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top