The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support ExtremePSI

Search results for query: *

  1. electrical problems

    Ok... on my 90 tsi awd,there seems to be a draw in the electrical system. When my car is turned off, somthing is slowly draining the battery. The only extra electrical thing i have on my car is my deck (stereo). Ive heard somewhere before that dsms have a sort of electrical draw when you...
  2. ONLY 6PSI at 4,000RPM?

  3. My dead Ecu.. help

    hey..I also noticed on my Datalogger that the battery get's sucked down to 8 V when the car is on its way to stall out...could this be a battery or alternator problem and not my ECU???Thnx again
  4. My dead Ecu.. help

    Hey..I have a 90 tsi awd 5 speed... went to start my car last nite..The car started up fine... ran for a little bit then started to die out.. all the lights inside and out became dim and the car started to run like crap..Eventually.. it was close to the point where it was going to...
  5. S-AFC or E-manage?

    just want clarify.... from what ive gathered... maybe im just dumb... SOOO Tuning a car with bigger then stock injectors aka 550's using S-afc is not very efficent? Is this correct b/c this is the current system I was going to use.Thanks...in no way do i intend to steal this thread...
  6. Best place to mount S-afc 2

    i might look into that vent peice.... did u get it off ebay?thanks g
  7. Best place to mount S-afc 2

    hey i was just wondering if anyone has any pics or ideas about the best place to mount a s-afc 2 in a 1g.Thanksgpeace 1
  8. Thinking about eliminating muffler...

    my setup sounds sexy... ported o2 to 2.5 DP and 3" all the way out into a 3" megan racing turbo muffler........ really nice sound....All this talk about open DP makes me wanna do it.......anyways..peace 1
  9. 3 inch intercooler piping?

    In that case..... make your piping....... 1.5 inchs............Personally my setup is as follows....from side mount IC 2.5" to 3" to 2g throttle body elbow....I really dont kno how my setup came to be... I just had pipe laying around so i made it...Someone will probobly have...
  10. To Buy Or Not To Buy...

    i think i might get it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Any other input?
  11. To Buy Or Not To Buy...

    hey...I have a chance to sell my 90 Talon Tsi Awd ( I love my car... but i kind of want to try somthing new for a bit), and buy a 1990 Nissan Skyline TT GTR 5 speed... the car is in great shape and has only 65,000 km's on it.I really like the look of the car.... any opinions...
  12. nitrided crank

    Theres a thread on here somwhere about Nitrided cranks in the 7 bolt motor making it a more power full motor....I know that the 7 bolt design is suppose to be a superior motor to the 6 bolt. But the crank walk issues have stunted its popularity.Im all for 6 bolts... since they have...
  13. Starting to Tune... Need a little help

    Im just curious to know...Can you run S-afc with the Maf-t setup?Thanks againGokhan
  14. Starting to Tune... Need a little help

    I have been reading alot on tuning so im slowly learning what i need to do.Obviously, Im not going to jump into somthing Im not fimilure with, I just want to know the best way to start tuning.If im going to get bigger injectors in the end, do you think it would be a much better path...
  15. MEGAN N1 Turbo Muffler Review

    Hey...Well I want to take the time to review this muffler I had put on my car about a month ago.Its the Megan N1 Turbo muffler off Ebay.I paid a total of $89.00 USD for it shipped to Canada.With my setup.. 2.5" downpipe to 3" all the way... this muffler sounds sooo good.It...
  16. Starting to Tune... Need a little help

    ok..So if i upgrade to larger injectors, FMIC, GM maf...I can run the MAF-T and the S-AFC along with the datalogger and be able to start to really get into tuning?OR... do you choose one or the other?I really want to start tuning but i want to know what exactly I need to start...
  17. Starting to Tune... Need a little help

    hmm..I see!Thanks alot for the help man.So, now I guess my next qustion is... which route should I go by?Get a S-AFC or Maf-t?Somthing tells me that the Maf-t way is a little more wallet friendly.What are the pro's/con's of both?Thanks again:talon:
  18. hey guys, new to the site

    :thumb:
  19. hey guys, new to the site

    Welcome.... my son....WHAT DSM MEANS IN ONLY 1 WORD:asexyamazingcarthatgetslotsoflooksaswellasdrivesyouinsanebutitslikeahotmodelgirlfriendthatyoucanneverstaymadatcuzshessodamnfinebutdigsadeepholeinyourwalletbutwhocarescuzshessodamnfineandreallyfastandsodamnfineHave fun!Peace...
  20. Starting to Tune... Need a little help

    Well...I have all the parts ready to start tuning...My qustion is.. now that I am at the basic stage to start tuning my car..-How far can I actually tune without an AFC/S-AFC? Will I be able to see any power gains, better drivabilty with just basic tuning..Basicly.. what i want...
  21. Thought I'd let you all know!

    Hey Defiant... i respect my car too much to get into the melted piston thread....by saying.. im going for a rip means... im goin for a nice little drive with occational boosting! :pI ported my o2 sensor alot, however i dident port the part on the turbo side, because I had the o2...
  22. Thought I'd let you all know!

    Hey...I just got my exhaust system setup!ported 2g o2 housing 2.5" downpipe 3" all the way back!!!!I must say... MEGAN racing makes amazing mufflers! I got the N1 turbo muffler off ebay and it sounds amazing.My car feels soooo fast!Anyways... time to go for a rippeace...
  23. Starting to Tune... Need a little help

    90 tsi awdhey,I recently picked up a Data logger and am in the process of getting a cable to hook up with.What i need to know is:1) Is there free software to tune my 1g? 2) Anyone have any links where I can download them.Thanksg
  24. Tranny drain bolt head stripped. NEED thread size!!!! ASAP Please!

    My drain plug got stripped once and wouldent come out..... so i drilled it out :D !!! Then I put a self tapping drain plug bolt in and it was alllllllllllll goood!I dunno if u wanna go this extreem.... takes a lil time...... start wit small bits and slowly go bigger.peace 1 :thumb:
  25. 6/4 bolt

    6 stands for the bolts on the fly wheel in motors made in 90-91 and early 92 dsms. These are the most reliable (crankwalk) and powerful motors.4 stands for the bolts in the rear diff found in 92 and up cars..... best rear end...so a 6/4 combo would make ur dsm pimp flex baby...
  26. UICP Hurting me......Please Help

    Anyone?:cry:
  27. UICP Hurting me......Please Help

    Hey...90 tsi awd (w/ cruise control)I just recently fabricated an UICP which is 2.5". I have also installed a 2g throttle body elbow to meet with the top of tha UICP. My problim is as follows:-The UICP is placed in between the 2 cruise control cables... -my idle is stuck at 2k...
  28. I Wish My Grandma Was This Cool!

    I thought id share this with everyone.......All i have to say is this:Highway..... see a 1g Talon wit an exhaust system, rims and what looks like a boost gauge on the A-piller....... pull up for a closer look......... 60 year old lady driving a reallly nice DSM.... what tha...
  29. best place for jdm swap?

    Not sure man...... probobly not, but it wouldent hurt to drop them an email and ask if they have instructions.Im pretty theres instructions on tha swap at www.vfaq.com !The jsm swap is probobly the same as a regualr usdm swap excluding tha cyclone intake setup, i ditched this for now...
  30. Quick Qustion

    Hey...I made my own custom UICP..... The pipe starts off 2.5" and then goes to 3" where it connects to a 2g throttle body elbow.my qustion is this.... is it ok for intercooler pipes to start small and get bigger? Will it effect preformance or is there nothing to worry about...
  31. This freakin noise...???

    If my car is parked and running, and i listen carefully, i can hear a faint clunking (like a hard rubber ball is being dropped) sound coming from somwhere either under the drivers seat or somwhere in the engine bay near the bottom. I have no clue where this sound comes from so thats why im...
  32. civic turbo vs eclipse turbo

    A car is a car.... wether it be Honda, dsm, or anything else for that matter. If u have money then basicly u can do whatever u want... which means even make your Honda fast as ####!.... not just the 4g63 motor has all the potential.Ive seen cars that no one would think are fast, but when...
  33. best place for jdm swap?

    hey man.....I did the JDM swap from totaljdm.com.... and I have to say i am extreemly happy with thier service and thier motors.Got my motor with a cracked oil pan, and they sent me a check to cover the cost to replace it.g
  34. Egt Gauge Qustion!

    Ive been searching quite a bit, also reading the Vfaq..., just cant find stright forward answers to my qustion.........For example ive heard ppl say mount egt in the number 1 runner, vfaq says O2 sensor housing, DSM jim a wiseman says u can also mount it in the Down pipe....yea... ive...
  35. Egt Gauge Qustion!

    So im gunna get an EGT Gauge cuz i have the budget for it.... but i also have another qustion kind of changing the subject.... cuz i got the answer i needed about EGT's... thanks by the way..NOW...I am thinking of swaping out my 1g o2 housing for a 2g one. I read the Vfaq about how to...
  36. Opinions PLEASE

    What do u guys think of this setup.....ported o2 sensor housing, stock dp, 3" all the way back into a turbo muffler.Not sure what brand muffler yet all I kno is that its a 3" inlet etc.How will my car react to this setup keeping my stock Dp, due to lack of cash? (will i see...
  37. Egt Gauge Qustion!

    Shut the hell up u dirty son of a...... no im just kidding yea ur right, i should use tha search bar... to be honest i did... but not that well i guess...Thanks for ur helptake carepeace1:dsm: :talon:
  38. Egt Gauge Qustion!

    Hey.... I have a few qustions... :cool:I have a dual gauge pod with only my boost gauge currently in it.....Now... i was wondering if i should buy an EGT Gauge? Is it a worth while gauge to spend money on? OR Is there a better alternative to fill up my gauge pod?ANDIf i do...
  39. drivers axle won't come off!!!

    try using a hub remover.... it bolts onto the hub and has like a peice in the middle along a shaft that u pull which puts presure on the hub by pulling it and then removes it. I cant really explain it that well.... sorry but i hope this helps a bit...peace1g
  40. Very New To My New Dsm?

    Hey...Well first off i suggest u take a look at the Tuning Guide and learn some of the lingo and the basic path to tuning ur dsm before u start looking to mod ur ride... as for an intake... are we talking about an INTAKE PIPE as in off the turbo or an actual intake??Ill take it as an...
  41. 6 month start up need advice!!

    thanks alot guys...peace1g
  42. 6 month start up need advice!!

    I also heard that its a good idea to pull the MPI and the Ignition and turn the car over the same way u would for a compression test (leaving the spark plugs in ofcourse) just to get oil flowing threw the system and 2 the turbo....Good idea or not a good idea?Thanks againg
  43. 6 month start up need advice!!

    hey man Thanks for ur tip...My cars out side covered in a tarp since i dont have access to a garage... sooo the weather out here is very unstable anywhere from -30, -40 in winter to like +10 in spring and such.... i think rolling down the windows a bit has somthing to do wit the weather or...
  44. 6 month start up need advice!!

    Hey well.... my 90 tsi awd has been sitting on jackstands for about 6 months.... Its time for me to start her up and get back into the Dsm world.... (Timing belt and balancer belt have all been changed)Things ive done before i put my car up:-Flushed and Changed Oil with full synthetic...
  45. Transfer Case ISSUE...need good advice!

    3 bolt rear diff is USDM... xfer case is USDM..... tranny is JDM... motor is JDM.Im pretty sure that the ratio of the USDM xfer case is differnt then that of the JDM tranny....but any advice u give me will help.thanksg
  46. Transfer Case ISSUE...need good advice!

    heyI have a JDM 6 bolt motor and a JDM transmission in my 90 tsi awd.....however.... i am running my old USDM transfer case.... i have been noticing some problems with the way my car moves after is in gear. The car shakes quite a bit when i let off the throttle.... Im thinking that...
  47. !hks Ssqv Qustion!

    yea man, i gatta be honest, im down wit tha bling!But there is truth to what I was saying, i dont mind the loud BOV, but id honestly like to be more stealth, and yeaaaaaa, i will eventually run the BOV vented, when i have all the supporting mods to do the "Blow threw" setup.PLUS, my...
  48. !hks Ssqv Qustion!

    Hey whats up?I recently got an HKS SSQV off my buddy for free since he was parting his car out and gave me it as a gift.I've heard alot of good stuff about this BOV so i want to put it on my car... however im not running a "blow threw" setup, so i will be re-circulating it back into...
  49. Which clutch [Merged 3-9] what clutch best

    Hey...I dont wanna be a jerk... but since we are on the topic of clutch's I thought I'd ask: which clutch is better for my 1G (1990 tsi AWD).Mods: -Jdm trans+motor -14b -Ported 2g manifold/02 housing -3" Exhaust System to the stock DP -intake -Boost gauge -Mbc 12 psi -free mods...
  50. Which OCTANE To Get?

    I am able to get 100 OCTAINE Aviation fuel.Got a few Q's before i try it:-Is it leaded? -Is it a good fuel to use in my car? -Will i see any improvments?ThanksNote: Currently running 92 Octaine.
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top