Used Innovate LC-1 wideband oxygen sensor. This was pulled in working condition from my car because I decided to run a different sensor. This comes with everything needed to install and log, but no gauge for display. Also comes with a second sensor that is in unknown condition. This part is sold...
I'm replacing my old rusted out exhaust with a Megan Racing unit. I noticed that the exhaust hangers are off by 90* and have threaded holes in them. Should I be running bolts through the rubber hangers off the body and into the threaded holes? Or should I be rotating the rubber hangers 90*...
Do not post your entries here in this thread and please read the whole message before asking questions.Please make sure you read the following rules carefully before submitting your photos, as they have changed since last year:1. You can only submit photos of a DSM that you own, and you...
This will be John's (@TSiAWD666) 5th year competing at the Grassroot Motorsports Ultimate Track Car Challenge at Virginia International Raceway. Sadly, last year he blew his turbo in the warm-up session and was not able to compete in the event and a turbo swap had to be performed early Saturday...
This will be John's (@TSiAWD666) 5th year competing at the Grassroot Motorsports Ultimate Track Car Challenge at Virginia International Raceway. Sadly, last year he blew his turbo in the warm-up session and was not able to compete in the event and a turbo swap had to be performed early Saturday...
Do not post your entries here in this thread and please read the whole message before asking questions.Please make sure you read the following rules carefully before submitting your photos, as they have changed since last year:1. You can only submit photos of a DSM that you own, and you...
Porting this over from my blog section to the forum before the system migration to prevent risk of loss.I figured this would be some good information to post since I haven't made a blog in a while. I pieced together a set of DG coilovers a while ago (Nov. 2010) and am just now getting...
I've got a set of Racing Hart Evolution C2 wheels for sale. They are 18x7.5 +42 with 225/40ZR18 Kumho Ecsta STP tires. I've had these wheels since I bought the car and love the way they look - they turn heads everywhere I go! I really hate to get rid of these, but the more I get into racing...
I've got a set of Racing Hart Evolution C2 wheels for sale. They are 18x7.5 +42 with 225/40ZR18 Kumho Ecsta STP tires. I've had these wheels since I bought the car and love the way they look - they turn heads everywhere I go! I really hate to get rid of these, but the more I get into racing...
I've got a set of Racing Hart Evolution C2 wheels for sale. They are 18x7.5 +42 with 225/40ZR18 Kumho Ecsta STP tires. I've had these wheels since I bought the car and love the way they look - they turn heads everywhere I go! I really hate to get rid of these, but the more I get into racing...
NEED FOR SPEED: KEN BLOCK'S GYMKHANA SIX -- ULTIMATE GYMKHANA GRID COURSE - YouTubeNot terribly impressed with this one. Doesn't seem like anything new.Seems like they did a little camera magic on one of the wrecking ball shots as well to cover up a potential hit.
Very cool concept and video. They took actual data from his 1989 McLaren-Honda at Suzuka to make this possible. Glad to see Honda did this tribute to the legend. It'd be awesome to experience this in person.<iframe width="560" height="315" src="//www.youtube.com/embed/oeO2q8FzcnM"...
Do not post your entries here in this thread and please read the whole message before asking questions.Please make sure you read the following rules carefully before submitting your photos, as they have changed since last year:1. You can only submit photos of a DSM that you own, and you...
I can't say I've ever seen this issue, but wanted to ask if someone has run into it and how they solved it. The back of the Jay Racing relocation bracket has a cut out machined into it because of how it has to mount to the block.Here's what that notch is to go around. The flat...
A bunch of us (turbosax2 #27, twdorris #83, TSiAWD666 #209, tsunari #13, WillRaceForBeer #95, and Jen #10) went to Summit Point for a TrackDaze event for the weekend. They were running the Shenandoah Circuit for the event which is a tighter, more technical road course. It was awesome to see...
If you don't know what that image represents, you don't get out enough :hellyeah:6th Annual NorthEast DSM MEETDate: July 27th, 2013
Time: 10:00 AM
Location: Ridley Creek State Park
Pavilion: 14
State park map with pavilions...
From now on, no opinion-based threads are to be posted in this forum. If the thread does not have some technical question, it should be posted in the Hangout. We have had too many new members trying to use this section to get around the minimum post count, and this is the only way to solve...
We have specific sub-forums dedicated to log file advice questions (both for DSMlink/ECMlink and other tuning platforms), so please utilize them. If you plan on attaching a log to your post, it should go in one of those sub-forums. Please make sure to read any/all sticky threads in those...
It seems when people post up and ask for log help, there are always some values that are helpful to look at missing from their captured values list. Here's a list of values that you should have captured to make answering tuning questions quicker/easier.If you're running SD, there will be some...
Anyone happen to have a 2gb FWD front crossmember (i.e. subframe) that is in good condition? Little/no rust, no stripped bolt holes or studs snapped off inside.Will not even consider buying without pictures. Please send them to [email protected]. Would like to see pictures of whole...
Do not post your entries here in this thread, read the whole message before asking questions. Please make sure you read the guidelines carefully before submitting your photos:1. You can only submit photos of a DSM that you own, and you must own the rights to the photo or have the right to...
For anyone coming, you can use this thread to say what all you'll be bringing and/or what you'd be looking to pick up. It'd probably be easier if you made one post that contained all of this info vs. making a new post each week saying "Oh, I found this and will have it as well". This will make...
CURRENTLY OUT OF STOCK. I'm currently looking for a new seal supplier and will update you when I've got a solution.My brother and I have been doing throttle body rebuilds for a few years now, but I know there's a lot of people out there who like to fix things themselves. So we are now...
I know rake has been mentioned a few times before, both used for combating understeer as well as less of a need for a rear camber kit (less important to me). I am interested in what you guys know about rake and how much is ideal (assuming the only measurements you have are ride height and not...
If you don't know what that image represents, you don't get out enough :hellyeah:5th Annual NorthEast DSM MEETThe meet date, time, and location have not been finalized, but are pretty set in stone. Let me know if there are any major conflicts (mainly race days)!Date: July 28th, 2012...
I'm guessing no one will be interested in this, but I'll put it out there anyway.$50 off a set of HUBStands using the attached PDF file! These things are amazing for doing corner balancing and alignments since you don't have to keep removing the wheel or jacking the car up/down. You can see...
Just wanted to let everyone know that a new Maintenance Guide has been released. The staff came together and devised a list of top items to check/monitor/replace in regards to properly maintaining your DSM. Hopefully this will help out for those new to this platform, or cover some items that...
I've been talking via PM to jtoby for a while on this, so I'd like to put some of this info out in the open for other people to benefit from. I've also got some questions for jtoby (or anyone else with Koni yellow and autox/road racing experience) that I'd like to address.First off, I've...
Hey everyone, it's time to start thinking about this years meet already! I wanted to get an ideas thread started and see what you guys can come up with to make this meet better this year. I know we had some issues last year with the food situation, but the attendance also seemed to be down...
CAR BUILDER>> PAGANI FACTORY TOUR PT.1 - Speedhunters
CAR BUILDER>> PAGANI FACTORY TOUR PT.2 - Speedhunters
http://speedhunters.com/archive/2009/06/25/car-builder-gt-gt-pagani-visit-pt3-the-power-of-vision.aspxI'm at a loss for words.....
I've had the itch to program something lately and have noticed how many times I'm linking to formulas, doing math on my own and posting the results, or having people post certain questions that could be easily answered using some form of calculator. So this got me thinking on how I could make...
With the new turbo system planning in the works, I'll eventually need to get/make a new exhaust. I am wondering if anyone has any knowledge around using an aluminum exhaust for an autox/road race application. This would most likely not but a 100% full aluminum exhaust, but would have a partial...
I'm wondering if anyone has used one of these filters. I'm looking to switch to an aftermarket filter to use with E85 and hadn't seen anyone mention these options.Any thoughts on the use of an integrated check valve in the filter?
My brother and I have been doing some searching to try and find sources for any/all brand new OEM connectors and pins. This thread will be used as a consolidated source of all info we find, as well as anything anyone else can contribute. We'd like to find sources for every single connector...
Updated to remove LM Programmer usage as it seems to be causing people a lot of trouble. Still retained one example using LM Programmer all the way at the bottom for reference.One question that pops up very often is how to hook up your Innovate LC-1 wideband controller. I figured I would...
Here is a project that my brother and I have been working on recently. Were both building our cars for autox/road racing, and one item that is highly recommended to have installed is a tow hook (preferably both front and rear). Weve been throwing around ideas for a year or so on how/where to...
I was wondering if anyone had a high res picture of the 10th anniversary logo that's on the '99 OZ edition cars. If not, can someone who owns one get me one please? Something high res, close up (to fill most of the frame), in focus, and, if possible, very little to no reflection. I know these...
I'm looking into getting 2gb rear knuckles since they allow you to run a bit wider tire than 2ga knuckles. I was looking through ASA for my FWD and found out the 2ga's have a superseded rear knuckle kit part number, and was wondering if anyone has used one. What I'm specifically interested in...
It's about that time again! Time to start thinking of plans for the offseason. What are your goals and plans for next season? What type of events are you planning on prepping for - road racing, TT, autoX, rallyX? What projects will you be working on in the cooler weather?I've got a lot less...
Do not post your entries here in this thread, read the whole message before asking questions. Please make sure you read the guidelines carefully before submitting your photos:1. You can only submit photos of a DSM that you own, and you must own the rights to the photo or have the right to...
I figured this would be some good information to post since I haven't made a blog in a while. I pieced together a set of DG coilovers a while ago (Nov. 2010) and am just now getting around to installing them. It's been hard knowing they're sitting in my house and not on my car for that long...
I've got 3 computers sitting around (in addition to my main rig I just built), and I'd like to turn one into a home server. I've had one running as a home server, but it's slow as anything when I try to use it. Here are the options.Dell Dimension 4600C
Intel P4 2.4GHz
512MB RAM
40GB HDD...
For anyone coming, you can use this thread to say what all you'll be bringing and/or what you'd be looking to pick up. It'd probably be easier if you made one post that contained all of this info vs. making a new post each week saying "Oh, I found this and will have it as well". This will make...