The one I ended up getting was the '93 galant vr4 90amp alternator

Until you get down under :)

Heres a good starting point if you wanna strengthen your internals :)http://www.2gnt.com/www/corbin/rebuild.html

Well, the clicking in the relay means its functioning. Check maybe your pump went bad or you could see whats going on inside the tank.

Is the fitment of this pump right? or is it to high? from my understanding the fuel line cannot be bent so this is the only way to make it straight. Any opinions welcome

OMG I didnt know gas was not conductive, and the reason I asked was that the positive wires have sealed boots on them. Well I guess if gas was conductive then it would ignite, right? or would it? Anyways thanks for the info and fast response.

Hi I just dropped my tank for some welding I gotta take care of and I was gonna drop in a 190lph that I got used but I just noticed that the connector piece was missing and I cant wait days for and install kit to get in. So my question is "Would it be fine to just use some connectors and seal if...

It mimics the 1g air vent :), do you miss your 1g? hehe 1g for life

Thanks PIMking, I'll try that :)Oh and where can I get my injectors cleaned? Is there a do it yourself way? thanks

This will work with the Evo 560cc injectors?

Not what you want it to look likeImage links dont work. :( sorry

That's awsome!

I just got my injectors and I see that there is 2 lower seals that are tight fit and hard and 2 of them are soft rubber and they loosly fit on the injectors. Can I use my seals from the old injectors or is this something I can buy from Napa or autozone? no mitsu dealer arround.

HeHe ^^^^

That's bad ass, thanks for the help. I'm gonna mount it this way, what did you use to make it stay like that? plexi glass?

I got an Safc and I have no idea how or where to mount it, I got the 1g Tsi any suggestions with pictures would be a plus. Thanks for the help

As title states, I just bought a 190lph and forgot to look for if its FWD or AWD so I got the AWD. Can I fit this into my 1g FWD car? (I sure hope so) Thanks.

I replaced the whole upper hose and tightened the clamps down. Thanks for your input guys, I'll post back in a couple days.My 560cc, 190lph and rewire kit will arrive next week :)

So I replaced my upper radiator hose and BOV to intake hose (dry rotted) and there isn't no leaks as I can tell but the radiator is smoking cause when I removed the hose coolant went all in the radiator. I'll drive for a couple days and see if it still leaks.

Ya I'll just wait, it's runnin' fine (for now :)) hehe

Thats, what hes saying. All parts, gaskets needed. He said hes done it to all his friends cars, but I dont know his friends. I'm skeptical whether I want to get it done, I'm worried hell mess up something and I'll pay for it in the long run. Is removing the shafts a big improvement for the...

So this guy locally quoted me $200 for doing the mod less oil and filter. Is this a good deal? I kind of dont wanna leave my car with a stranger for a weekend and I'd like to do it myself (for knowledge purposes) but dont really have the time. So bottom line is, do you guys think its worth...

UpdateWent and picked up my Safc, and I noticed it leaking at the gas station. Went to Autozone picked up a new 13psi pressure release radiator cap ;) and when I got home I checked my T-stat housing and I noticed that at t he clamp of the upper rad cap is slowly leaking. So I think thats the...

If you are gonna have your ECU out might as well change the capacitors (if you think you can handle it) this is where you can get the parts, and this is where some good info is on how to do it, remember do this all at your own risk, or take it to your local TV repair shop or so. If your ECU...

I think its because I put to much. After the HG replace I would check it every so often and add coolant in it until it filled up 'til the radiator cap. It hasn't leaked recently so I dont think its pushing. Thank god, I dont wanna do another HG job for a while. :) Thanks for all your help guys

Yes, I torqued down through 5 different sequences, good thing you cannot put it backwards, most likely I did it right I just dont remember thats why I asked.I'm running 12 boost tops I dont think thats that much to lift the head.Wouldn't it leak around the HG if the head lifted?

By backwards I mean upside down, what do you mean I'm pushing coolant?

Hi, I was wondering what are some of the symptoms of accidentally placing a thermostat backwards?Last month I replaced my head gasket, water pump and thermostat and its all good but I noticed sometimes it leaks coolant out of the holding tank. I dont remember if I put it in backwards, I...

I got a 92 Tsi Fwd and on my way home from work yesterday the engine heated up, so I shut it off in the middle of road to avoid engine damage, I had a huge cloud of smoke almost thought my car was on fire. Checked it out i noticed that coolant was gone but the overflow tank was full. Thought of...

I use Mobil 1 Synthetic.

I've had my car for a year to be exact, damn maybe they drove it hard, I change my oil every 3k miles. I've cleaned it up as much as I could, hope that will do something. Do you think this is a major problem or I can still drive for a while?

I was replacing the cam cover gasket and decided to clean the lifters since I had the cover off anyway I noticed the head has a bunch of crap on it and I was thinking if this is just normal for a car that has 125k miles (most likely yes), or could something be causing this i.e. bad turbo, blown...

Yeah but you gotta remember the 1g's are not that far from being a classic and thats plenty of time for things to wear out and rust, especially if you live in Michigan. Replacing parts, I look at it as restoring my car. Step by step it will be like it was the day it rolled out of the factory...

Ok I've searched but with no avail. I'm looking to see what injectors I can run with a 14b tuning with safc ? I'm planing to upgrade to a 16g in the future, so can I put the evo 8 injectors 580cc with a rewired 190lph? or should I go bigger, such as the 650cc? thanks for the tipsAt the...

The thing was when I got the car it had an eclipse rear end conversion but the guy didnt bother to change the wiring so I had to rewire my lights, somewhat like this but I cant make the blinkers turn into park lights for some reason. Oh and also for my car the last step of the hookup i had to...

Thanks alot Nick, Ill try to trace back the power to where the 3rd brake light and the tail light wires meet. And also check the ground and sockets. Thank you sir.

Ok so my brake lights dont light up only the the one on the spoiler dose. Checked all fuses relays, nothing. I tried to bypass the switch but nothing, the spoiler brake light works so I dont see the switch being bad. I've checked ground wire on intake manifold, no luck. Signal and park lights...

Ok so my break lights dont light up only the the one on the spoiler dose. Checked all fuses relays, nothing. I tried to bypass the switch but nothing, the spoiler break light works so I dont see the switch being bad. I've checked ground wire on intake manifold, no luck. Signal and park lights...

I know I need a bigger fuel pump, but is that it? with a bigger fuel pump dont I need a fpr? thanks

Ok so far I found that the exhaust manifold gasket is leaking (its visible) and the valve cover gasket will need a replacement as well at the stock turbo oil feed/return lines. I'll replace these parts and see if its still leaking. Also how dificult is it to remove the lover timing cover? do i...

My break lights don't work the only one that works is the one in the middle on the spoiler, checked all the fuses the bulbs themselfs they seem fine, i really dont know where alse i can look, I'm a dummy when it comes to electrical wiring :notgood: so any help will be appreciated. I've searched...

wow thanks for all the fast info i really appreciate it, ill try to move the pump and see what happens

how do i get the far right bottom nut off the exhaust manifold, the ps is blocking it so no socket will fit, any help will me much appreciated

From where do you think the oil is leaking from on the alternator? ps pump contections arent leaking could it be comeing from the exhaust manifold?

what exactly are you talking about? thanks again

I've been trying to locate an oil leak on my 92 turbo talon, I have some possible spots like the crank case gasket, exhaust manifold gasket and the head gasket but not sure if I'm right so i want your opinon on this, the reason why i want to find the leak is because I got oil on my new...

I was checking if my ps pump was leaking because my new alternator has oil all over it and cant figure if out where it is coming from when i noticed that the trans was makeing a horrible noise when i would accelerate and then let off the throttle, it sounds like something is loose in the...

Thanks for the info, i already got it up and runing for like 2 days, but i was wondering what Buck said about the power steering pump leaking cause the last alt was filled wit grease and I thought that it was oil that might of leaked on it cause i have an oil leak but ill check the ps pums...