Or just pick up a holset...That or if you want to go FP, give them a call and they can set you up with what you actually need for your specific setup, instead of you pondering bolt-on exhaust housings.
I have a complete AWD setup that you could get if you want to travel to MS. (transmission, transfer case, driveshaft, rear subframe, 4bolt lsd) Everything.
I'm talking with a guy that custom builds multi-disc clutches.. Not anything completely ironed out yet, but if it comes to light, I should have a twin-disc setup available for DSM'ers at a significantly lower price point and the rebuilds would cost less than half of my QM twin.
Behold the power of harbor freight... Buy the extended warranty if you're afraid of it breaking. Reviews are great.60 Gallon Air Compressor - 2 Stage, 5 HP, 165 PSISpecs:
5 Horsepower, 60 gal, 165psi Two Stage Air Compressor.
Brand: Central Pneumatic
Amperage (amps): 22
Capacity: 60 gal...
I invest money in parts, honestly. I make money for parts/projects by buying/selling stuff. I usually intend to use the part, eventually, but sell it and upgrade. Never dip into bill money for play money, word of advice. Also, buy a decent daily. LOLNothing wrong with that. I remember...
Yeah, I bought a competition clutch fork/pivot ball setup... I also saw the extended rod. I'll report back how I like the QM when I get it installed. Bonus to the comp fork, you don't have to grind anything down. I got it for pretty cheap at thmotorsports. Looks nice, drop ships straight...
I haven't, but I've seen it happen... Oddly enough, at a Honda dealership. Ran straight into a tool cart and wall, after hitting another car. Needless to say, the tech was let go. ROFL
The fitting I listed, is the right fitting. Point blank. It's the EXACT fitting extremepsi sells with their kit. Or, go ahead and pay 3x more for the exact same fitting. It your car. I don't have ANY leaks, the others who do it, don't either. And I certainly haven't been hearing complaints...
I've used three sets of cheap ebay junk, brakemotive rotors. Been on the cars for over 3 years, with no issues. Better than stock stuff. They were all drilled/slotted rotors. One set is on my TB and has gone through mud, snow, rain, large amounts of standing water, ice, heat, drag strip...
I've used them before, think they came with evolution pads? It's as straight forward as any rotor/pad installation can be. Just make sure to clean to glaze off the rotors before you put them on with brake parts cleaner and to follow correct brake rotor/pad break-in procedure. Most of the time...
You need this part, you can get it from summit, jegs, ebay etc. It's an Earl's female 14mm x 1.5 "saginaw". The part number is: 9894DBHERL. You'll find that the extreme psi part number is 9894DBH, the one I said, minus the ERL. I got mine from summit I think. Save yourself some money and use...
I'm going to order the charcoal lines, for a 2G 1998 GSX with Brembo calipers front and rear. My front lines are already stainless, but the rears are OEM (odd, right)? Should I just give you guys a call and get it all setup? Plus this setup would match the brakes on my gsxr1000 too...
The oil pressure DEFINITELY drops at idle from cruising... Put any gauge you want on there, it'll do the same thing. 15psi idle 75'ish driving. That's from a mechanical gauge.
You can have the valve cover powdercoated instead. It will not only look good, but will also be a durable coating that will not get messed up very easily. The black valve cover is factory. You'll need to get some aircraft remover (found at parts stores or walmart, the gel works best) and get...
A 9" junk? LOL... That's why all the chevy and ford guys upgrade their 10bolts, 12bolts, and 8.8's to 9's right? Along with various other brands... Lmao be quiet
No, he didn't purchase the wrong flange type. OBX has terrible quality control issues and it shows in almost every form and fashion in ALL of their products.Yes, he meant wastegate provision, but stated BOV port for some reason. Probably just a newbie and got the two slightly mixed up...
Urban dictionary says otherwise ROFLUrban Dictionary: RicerYou are doing what some would feel to be unnecessary body enhancements, that do not improve performance of the car... I could more-so understand if you were wanting to do 2Gb upgrades to a 2Ga, but most feel that body kits are...
Like I said:ROFLWhy all the animosity, bruh? Did a Rebel boink your ex-gf and steal her? This is the quote we go by: OLE MISS, because we're better than you... and we know it.Hahahaha, I hate people that say "bra/bruh"
I don't think Alabama fans get along with anyone. Besides they can both be "your" team, they're both in the same state, your parents/etc could have gone to each school, so therefore you like both. Most people that get so deep into the hate and rivalry, never went to that specific school they...
They're both alabama teams, kinda simple to make the connection ROFLMy team didn't do so well, but put up a decent fight. Ole Miss 13-14 v. BYU. Sloppy game for sure, but that third choice QB is looking pretty good.
An oxidizer will add oxygen to a controlled burn (such as an internal combustion engine). It serves to add more air (atmospheric air is 21% oxygen, N2O is 33%) and cools down the intake temps, the nitrogen acts as a buffer and controls the burn.Basically any fire is an oxidation process, the...
I was going to buy that car back in March, but couldn't get everything lined up in time to drive to Tampa, then drop the car off and head to Houston, TX for TX2k11.
Some guys can't drive while others can. IF a 98 cobra can't run 13's with bolt-on's there is something wrong. Heck my '96 ran a 13.4-13.5 bone stock on a stock street tire, within the first two weeks of owning the car.
You could use a 255 walbro from a gst, you could also use the suspension. The FWD suspensions are the same, gst or 420a. The engine and transmission itself, no.But bushings, springs, coilovers, interior (besides cluster), body panels, etc will all work.-For your newest post. ETS makes...
Well, go to GOOGLE.COM and type in nhra safety rules. Also, your local track should have them listed explicitly on their website, since some tracks do differ individually.You really don't sound very experienced at all. I'd hate for you to get several thousand in and just scrap the project...
You miss the point that this video was more than likely staged.. There's so many what-if's in life, I guess you should just never leave the house.. Anything could potentially be spun into a felony, depending how much you want to think, doesn't mean that's it's going to actually happen. Where...
Eh, that's debatable and could easily be over-turned in court. The video was most likely planned and she probably was with them. See boat, see chick in bikini walking down the road.. It makes more sense that it was planned, chances of that otherwise are very, very, slim.
Of course it was wreckless, but so is speeding. I mean anything can go wrong, a tire could have flown off and hit her in the face. :pNo, don't get upset, had nothing to do with you at all. :thumb:Bang bro's does much worse things to women than diesel smoke LOL :rocks:Oh noes, not...
Honestly, a b-series swap will cost around 2k if not more. Unless you know a crack head or a good buddy that stockpiles honda parts. There's a decent list of parts needed for a b-swap. This is especially true, money wise, on something other than a b16. But I guess I'm not educated, eh?