My favorite tag i've seen said "pushme" quite ironic that it was on a tow truck haha.

I did that a while back... trust me the tapping will return :cry:

I second steve!! He just repaired and socketed a ecm for me and it turn out great!

I believe there is a adapter you can buy that will make your ipod work off of a stock stereo. I have a pioneer thats ipod ready, so i can control it on the radio. Check on www.crutchfield.com, I'm pretty sure i saw it on there.

It sounds like to me the vacuum booster may not be getting vacuum or there is a vacuum leak from it. i would check that vacuum is getting to the booster and pull vacuum on the booster with a vacuum pump.

My 91 talon has 138k on the clock and still running strong!!

Some more information would be helpful... Does this vibration feel like its coming from the motor? It sounds to me like it may be a misfire from a plug wire when it gets wet. Now if its just speed related then its most likely a bad tire/balance issue.You could try and spray water over...

Thats really sweet man, congrats!!

Congrats!!! That was a awesome vid!!

I would first check the battery cables on the battery, both for tightness and signs of corrosion. To check the fuses, you can either use a test light/multimeter on each side of the fuse or pull them out 1 by 1 and make sure the metal inside isn't blown. You may have a bad starter though, you...

I would check for vacuum leaks and the fuel pressure.

you can try a chisel and a hammer. that will usually work. just take it slow and easy and they'll come out.

check your hose in your overflow tank from the cap. i've seen where the hose doesn't go down like it should, sometimes it folds up if your not careful. that would let coolant drain into the overflow and not get sucked back into the cooling system. hope that helps

the length of the piston appears to be the same. since the piston has a bigger diameter, it takes more fluid to push the piston the same amount. so its not gonna get full travel. the only thing i can think of is maybe that slave cylinder is from something else and perhaps the pushrod is custom...

i didn't mean how to bleed the system... my question was has anyone had a problem getting the right slave cylinder? the bore is bigger in the both of the slave cylinders i bought so the piston doesn't travel as far with the new one.

well... i have a leaking slave cylinder. so i ordered a aftermarket one... the piston size was aprox. 1/8" difference. i got another one from somewhere else same thing. tried getting a mitsu slave rebuild kit. piston was same size. the piston off of the orignal slave cylinder was red and...