The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Register Log in
Please Support ExtremePSI
Please Support STM Tuned

Search results for query: *

  1. 1990 Eagle Talon Tsi AWD roller

    Reply to question by 'Nate_dogg' on the classified ad '1990 Eagle Talon Tsi AWD roller'

    Thanks for giving it a look.
    • Nate_dogg
    • Classifieds question reply
  2. 1990 Eagle Talon Tsi AWD roller
    Sold

    For sale 1g 1990 Eagle Talon Tsi AWD roller

    1990 Eagle Talon Tsi roller Clean Kansas title. Car located 10 miles south of Wichita ks. Car has been sitting inside for over 10 years. Time to clean shop out. Custom interior back seat delete. 1993 front brakes. Roof dented from when the hood flew up while driving to work at 65mph. (hence the...
    $1,500.00
  3. Nate_dogg

    DSM stock whp?

    I think the 180-195 is flywheel hp it would be interesting to see what a completely stock DSM would put down to the wheels.
  4. Nate_dogg

    Sometimes spark, sometimes no spark

    Thanks for your fast responses on my problem. I have now checked and changed the coil and the PT with no affect, then I did an ohm test on wires from the Pt to the computer, and they checked out good...then I put everything back together and it started right up. I am thinking my connector to my...
  5. Nate_dogg

    Sometimes spark, sometimes no spark

    About 3 months ago I had a spark issue, I replaced the CAS and that seemed to fix my problem. The car has been sitting a week since the last time I drove it, I went to drive it today and again no spark. So sometimes it will get spark, and sometimes it won’t. Has anyone ever encountered this...
  6. Nate_dogg

    Awd car on rwd dyno?

    I installed a vce, to put mine on a 2 wheel dyno, put down 365hp. It was fun to drive around in fwd mode for a while :) lot of spinning loloh and the vce install is pretty ez btw. good luck
  7. Nate_dogg

    Clutch accumulator

    I have a 1g with a Quartermaster twin disk and want to run the 2g clutch accumulator. I am having a hard time finding this part, is there a different name it goes by, or better yet does anyone have a part number. It would be great to get a new one from AutoZone or any local auto part dealer...
  8. Nate_dogg

    alarm fail

    I mean the battery in your remote :)
  9. Nate_dogg

    First intercooler setup need advice

    That kit on ebay looks pretty good, I am running a ebay IC and it works pretty good.
  10. Nate_dogg

    alarm fail

    Battery probably to low I would guess
  11. Nate_dogg

    Painted my wheels

    I like it, and I also dig the wing delete. Kinda looks like a 240 from the door back.... if you cross your eyes a little lol
  12. Nate_dogg

    the biggest friggin turbo ive ever seen. now its mine

    These are some turbos my friend found at his work, just laying around. Wish he would have put a measuring tape next to them.
  13. Nate_dogg

    Quick HELP now

    ThanksThat crack is in the fuel line fitting for the fuel filter, I had it mounted to the firewall in the stock position. Well come to find out the hard way, I didnt leave enough slack in the fuel line between the rail and the filter, so when the motor rocked forward from getting on it hard...
  14. Nate_dogg

    Sheetmetal interior update and cleaning

    Looks like I will have to find a different adhesive, its starting to let go now.as far as the rattle there is none that i can hear, but my car is pretty loud to begin with. lolThanks for everyone’s positive replies about the interior.To make the panel for the rear seat cover I...
  15. Nate_dogg

    this just can't be

    just curious, but what was the temp outside during your dyno pull?
  16. Nate_dogg

    Return fuel line size

    U might be wrapping the tape the wrong direction
  17. Nate_dogg

    Sheetmetal interior update and cleaning

    Sure bring it on down, im still laid off and have plenty of time on my hands lolI got it from an auto interior shop here in Wichita ks, cant remember the name of it now, but i just did a google search and started calling different places to see who i could order from. It does come in black...
  18. Nate_dogg

    Just received a remanufactured 4g63 head

    Where did you get it from, I would ask them to be sure
  19. Nate_dogg

    Quick HELP now

    I had a fire also, after draining the water from the oil pan, I removed the motor, tore it a part, cleaned and put back together. I didnt touch the rotating assy.U can see that the intake was melted pretty goodthe cause of it allThis is what the motor looks...
  20. Nate_dogg

    Why we love cars-video

    That vid is right, it will come to an end
  21. Nate_dogg

    How am I doing? I went from this...to this.

    Looks nice
  22. Nate_dogg

    A little custom touch. Tell me what you think.

    looking good
  23. Nate_dogg

    hey guys im new to dsm tuners

    welcome :)
  24. Nate_dogg

    Noise from speedometer.

    Liquid graphite always has worked for me in this situation.
  25. Nate_dogg

    hard to start

    I had the same problem when my talon was stock, exept for the lights flickering...anyways after I changed my injectors the problem was gone. hope this helps
  26. Nate_dogg

    New problems. BLOWBY?

    I would do a boost leak check also
  27. Nate_dogg

    Sheetmetal interior update and cleaning

    Thanks again for everyones positive feed back, To get the vinyl to stick to the aluminum I first sanded the aluminum with 80 grit and wiped it clean with break clean, then i had to do some experimenting on the procedure of attaching and different types of glues, we ended up using a adhesive...
  28. Nate_dogg

    Sheetmetal interior update and cleaning

    Thanks for the props for the interior, and I totally understand what you are saying about the seat belts, after getting the interior all done and taking the car out for a drive with those seat belts I soon realized the seats and the seat belts are not a good design, the only reason I used them...
  29. Nate_dogg

    Sheetmetal interior update and cleaning

    That is a good point, I should take out the sound deadening mat crap, and for the belts and the sheet metal I made the cutout big enough so the belts will not rub at high tension and I do have metal reinforced vinyl trim around the cutouts as well, that crimps on. Thanks a lot.
  30. Nate_dogg

    Sheetmetal interior update and cleaning

    Thanks for the positive replies, also I am glad to say (surprisingly) it does not rattle :)
  31. Nate_dogg

    Sheetmetal interior update and cleaning

    Since I have been laid off for about 4 months now, I thought this would be a good time to redo my interior, seeing that I have more free time than I know what to do with lol. Here are some pics of the sheet metal work and carpeting. Thanks for looking. Nathan
  32. Nate_dogg

    F/S 1993 Talon Tsi Awd, Caged rolling chassis (DSM)

    more pics added
  33. Nate_dogg

    F/S 1993 Talon Tsi Awd, Caged rolling chassis (DSM)

    1993 Talon Tsi Awd, Caged rolling chassis (DSM)I have been trying to sell this car for over a year now, and the price is cheaper than the cage cost to put in. Sorry if this is "trolling" or whatever, but I think this is the only site that someone will see it and want it. thanks
  34. Nate_dogg

    Odd hot start issue

    I had the same problem with my first talon when it was stock, so i changed the injectors and it fixed the problem, try to at least borrow a set of injectors and change them out, it only takes about 20 min and will at least cross that off the list if that is not the problem.
  35. Nate_dogg

    Bought a 1990 TSI but weird starting

    When my 91 was still stock i had the same proplem, after i changed the injectors it fixed the hard starting.
  36. Nate_dogg

    kansas meet

    I am all for the drive to KC, but i would like to see a little wichita meet also. At least get to know other dsmers around the area.
  37. Nate_dogg

    AEM 1G Problems with AEM EMS

    I am having trouble with my AEM EMS.I bought a talon with everything done to it that I wanted on my car, so I pulled the AEM EMS and all the sensors that go with it and even the injectors.After installing the AEM EMS, 5 bar map, RC 1000cc injectors, and AIT, I loaded the startup calibration...
  38. Nate_dogg

    DSMlink with 2g maf/60 trim and 850 inj

    Ok thanks for the info :)
  39. Nate_dogg

    DSMlink with 2g maf/60 trim and 850 inj

    Hey guys,Currently I am running dsmlink with a maft and gm 3.5 maf. Well I have always had problems with tuning this set up and I want to try something more efficient. Can I run a 2g maf with dsmlink on my current set up and not over run the maf?thanks
  40. Nate_dogg

    Anyone out in Wichita Kansas??

    hey im from wichita ks. that would be cool to get some dsm's together. when you get here the local dsm shop is called fusionworks racing, they work on all cars but dsms seem to be their specialty.
  41. Nate_dogg

    AutoCad question

    Why not?
  42. Nate_dogg

    AutoCad question

    Hi, It looks to me you need to join your curves using the pedit command. But I have never used 2007.
  43. Nate_dogg

    Hardest thing you've done on your DSM

    Watching it burn with a new fully built motor waiting on the fire dept. :cry: (FYI) Motor was ok and in new car now, and loaded with fire extinguishers just incase. lol
  44. Nate_dogg

    car wont idle

    My car wont idle at 5 deg btdc it will idle slow spudder and die. If I change timing around 15 deg btdc it will idle fine. I have tried to adjust idle at 5 deg with no help.Thanks
  45. Nate_dogg

    Boost is read, but the car is SO slow!

    Oh im sorry you are talking about your valve cover breather, I forgot how the pcv valve was set up, i just have mine hooked to a hose that runs down beside the tranny and i plugged the line that went to it from the intake.
  46. Nate_dogg

    Boost is read, but the car is SO slow!

    what breather do you speak of?
  47. Nate_dogg

    Boost is read, but the car is SO slow!

    Im sure there is a link on this site explaining how to do this check, but if all you are doing is pulling off your turbo intake pipe and capping off the turbo, then pulling off your BOV vac line and inserting your air compresser nozzle into that, then that is correct... well i hope that is...
  48. Nate_dogg

    Boost is read, but the car is SO slow!

    if you have a A/F gauge, and the means to change fuel mixture, make sure you are not to lean. If the leak you hear sounds like a small leak I would not think that is the main problem, but if the leak sounds really open and free moving then you should fix that first.
  49. Nate_dogg

    91-94 throttle body on 90

    Is it possible to wire a 90 turbo car for a 91-94 turbo throttle body?Thanks
  50. Nate_dogg's Talon TSi AWD

    Nate_dogg's Talon TSi AWD

Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top