I've been looking to do this swap too.
However it may be more beneficial to find a rotor that works with the proper height, size, and width.
Even if the pattern or bore is off that could be redrilled and opened up. Brembo allows you to search rotors thru their database with rotor specs
Going to also add. You can not submerse regular fuel line. They have some specifically for that purpose. Regular line will break down/deteriorate.
The kits do comes with the kind you can.
"DR25 is designed for optimum high temperature fuel and fluid resistance. These fluids include aviation and diesel fuels, hydraulic fluids and lubricating oils. It has a high continuous operating temperature of 150°C; DR-25 also offers superior mechanical protection and abrasion resistance...
Do not use vaseline. It'll eventually degrade it. Use something silicone based if needed. Honda has some specific stuff they made for the NSX that will probably work well for other vehicles called Shin Etsu.
https://twosrus.com/catalog/product_info.php?products_id=882
Could anybody measure the distance from center to center of hole from the 3000gt calipers? I know the DSM knuckle is 5". I know it's around 6 something.
This is the set I had, and used a h4 hid setup from sharphid. Was great, and nobody flashed me either.
165mm H4656 H4 Euro Conversion Headlights | eBayThey also have the clear lense one.
165mm H4656 H4 HID Euro Diamond Headlights Set | eBay
Have you actually used it? The pedal looks kind of chincy and cheap. I was considering buying it but was also thinking of just saving up 2500 for an HTP/lincoln/miller.
I'm not chiming in because I was lurking that bid for 3 months lol. I wanted to be a bit original with my 1g with eco brembos on all 4Arbiter 1g abs is complete junk and useless and takes up a ton of engine bay
You'll need some parts off a 3000gt vr4. Get both rear trailing arms. They use 2g style rear brakes where the ebrake is drum (evo uses this style too), and they're 4 bolt axles. It'll require fabbing but you can make it work.
You can easily make a "block off" to sand blast any of the ports with some wood and a drill and just bolt the wood to it to seal it off, then cap off the other ports. Personally I'd sandblast it, then alumablast it, then paint the lettering red.
This is a bit like the ones they have for the MR2 and FD RX7... I can't remember what they call them. But I'd rather have a projector in a housing.
<--currently attempting to retrofit a h3 mini morimoto into one.