well my oem exhaust hanger are wore out any when i corner my exhaust rubs on my drive shaft so Im going to order me some polyurethane ones but don't know what millimeter a 1g exhaust hangers are does anyone know?

I am referring to less wasted metal in the land fills and all you have to do to clean it is use brake clean and compressed air and I dont know what magnus oil filter you are talking about

you have a point there but I would be willing to buy it to save from oil filters going to land fills plus it has fins on the outer casing to help cool a magnet on the inside to pull metal out of the oil and the screen filter way better then any cheap 10 dollar paper filter.

Just make sure you get the right ones there is a inner and outer boot oem are the best the universal boots dont fit good on our cars and dont tend to last as long.

Just found out about this company they make billet oil filters with stainless steal screens they are called k&p engineering and they make a filter for our dsms I have never seen anything about them on this forum if someone has used one I would like to know more about the product and what you...

Make sure the cam angle sensor is installed correctly it can be 180 out and not timed correctly and not start.

Try taking the cop setup off and put the stock setup on and see if that fixes it.

Cyclone manifold for the win.

by not trying to do this at all.....

Do you have a auto transmission?

Don't forget the sr20det or the 4age.

Bullseye makes or made a bigger side mounting intercooler or go with the supra sidemount.

Mobile one 5w30 or 10w30 why no synthetic

Looks good to me.

I believe they are the same.

You posted two of the same picture on the tranny mount side.

How can you identify a mhi 7cm housing I have like 4 in my garage but not sure if they are 6 or 7cm?

I did some searching and found out the 14b has a 6cm and all the 16g turbos have 7cm housing sorry for asking such a dumb question. I couldnt find what size the 20g housing is thought.

what size housing does the 14b come with and what does the 7cm housing come one besides the evo 3.

You could just port your 14b housing to 7cm.

yea that would be helpful.

I am thinking of making a chart for future member to find easily of all the mass air flow meters we put on our cars and the point to where they become a restriction in our power development in hertz.1g maf 2g maf 3g or evo maf gm maf

I am from nevada, mo

You should post this in the classifieds you will get better results there.

Ok thanks I will check it

Get tapatalk will do what u want and its a dollar.

When the dimmer switch fails does it automatically go to full bright when head lights are on?

I have had the 93 talon for 5 years and since i have gotten it my dimmer switch has never worked when i turn the light on or driving lights the interior light are always on bright and i cant not adjust them how would i test my dimmer switch or wiring to find the problem.Also i have been...

Its kind of like a variable vane turbo.

1g rods with either 2g pistons or evo pistons.Sent from my SAMSUNG-SGH-I897 using Tapatalk

also put some yellow teflon tap on the threads this will also help.Sent from my SAMSUNG-SGH-I897 using Tapatalk

Go to streettunedmotorsports and get you a filter and a mas adapter here is the link.STM: DSM INTAKE | MANIFOLDS | FILTERS | GASKETS

How do you take the rear hatch black trim off my car trim is starting to pop off in places and would like to repair it?Could someone move this to exterior subforum sorry thanks.

Get a timing tool kit from one of the vendors makes the job alot easier. A bake caliper compressor tool for the rear calipers. Also a pocketlogger setup.Sent from my SAMSUNG-SGH-I897 using Tapatalk

Check the relay if the car has one if not unhook the fan and try and power it from a battery or external source to see if it is working.Sent from my SAMSUNG-SGH-I897 using Tapatalk

I think it is a honda resistor pack the bracket has a honda symbol on the bottom but is it ok will it run the injectors fine?

My friend bought a 1g fwd turbo talon and it has various modifications. I noticed the resistor pack looked nothing like I am use to seeing looks like someone changed it. I have a pictures is this going to be a problem for the car will it run ok with this pack?

Very nice its a work of art I like to see one on a 1g or someone make a kit and start selling these.

It sounds like to me you need to check your base timing and adjust your biss screw on the tb your idle should be at 750 warm no accessories on.Sent from my SAMSUNG-SGH-I897 using Tapatalk

Also you could get you one of those guns that tell you the heat of where it is aimed and shoot in alot of different spots on the radiator this could help you find where it might be clogged.

A few things you could check is make sure you dont have alot of bugs leaves stuff like that in your radiator and condensor. Make sure you fins on both are not all bent up. If you are on stock radiator it could be clogged up from age of coolant and if it is i dont know if water house pressure...

really same thread is there alot of good pics how many pages.

That comment seems tempting...

why is that nothing nude and it has to do with dsms.

Lets start a thread of dsms and sexy women posing for the camera I will start with a few pictures.

No I have not tested it yet painting a fender now to go on the car and installed another slim fan but soon i just got dsmlink so im really excited to see how it does. Idk what the thinkness is i just had some galvanized sheet metal laying around and used it.

After watching this video it really makes me want a honda awd wagon or a vista swapped awd 4g63 wagon.<iframe width="560" height="349" src="http://www.youtube.com/embed/q7ZzqBPz4sY" frameborder="0" allowfullscreen></iframe>

I bought a 2g maft filter kit and it came with a gasket for the bracket.

I would beef up your intercooler mounting solution.

Made me a heatshield for my intake today came out pretty well i think for my first custom fabrication. Took out the guards behind the head light to help out with air flow. Going to later build a way to get air from the fog light area to the intake then maybe seal the filter in a box.Made a...