100% stock

i jsut bought this 99 eclipse turbo and it runs like crap.. it has no power at wot... im getting a code that says mass air sensor or volume air flow.. i replaced the mas and still get the code with no changes...

hey i was just wondering if anyone ever had a problem towing a awd talon. i trying having my car towed to a bodyshop tonight and the rear wheels would lock up after we got down the street. is this normal???? if so please let me know why.... the parking break was off and the car was in neutral...

hey i was just wondering if anyone ever had a problem towing a awd talon. i trying having my car towed to a bodyshop tonight and the rear wheels would lock up after we got down the street. is this normal???? if so please let me know why.... the parking break was off and the car was in neutral...

hey i was just wondering if anyone ever had a problem towing a awd talon. i trying having my car towed to a bodyshop tonight and the rear wheels would lock up after we got down the street. is this normal???? if so please let me know why.... the parking break was off and the car was in neutral...

hey i was just wondering if anyone ever had a problem towing a awd talon. i trying having my car towed to a bodyshop tonight and the rear wheels would lock up after we got down the street. is this normal???? if so please let me know why.... the parking break was off and the car was in neutral...

has anyone ordered aftermarket black carpet for there 2g?? if so where did you get it and how much?? also how well does it fit??

i want to get my manifold jet hot coated the bright silver color but they tell me its only good to 1500 degrees. will this be good enough??? they sell a grey coating thats good for 2000 degress but i really want the bright silver. does anyone have this coating or know what it will do to it if...

I Had A Backfire In My Intake And I Posted Some Pictures Of My Magnus Intake Manifold That Exploded Due To This... I Just Wanted To Say That This In No Way Was A Problem With The Manifold And It Blew Apart Due To The Explosion Because My Car Was Tuned Incorrectly. Even Though Magnus Knew It Was...

anyone help???

i found a good deal on a set of crower stage 3 cams and was wondering if anyone has used them. are they more aggressive than the hks 272's??? how do they compare to the hks 272's?? any info good or bad would be greatlly thankful

i have the maf translater mounted under my hood and acouiple months ago i was searching and seen a company was selling a extension so you could mount it under the dash.

yes i did the same excect thing with my 2g t/b. it has been ported to 62mm and i cut off the 3 vac ports and jb weld also. but now that i have it installed on the intake manifold the t/b plate hitts the intake flange when its only open about 1/4. do you have problems with it hitting?? is it...

well you dont know what you are talking about. for your info i have a $250 t/b. its a 2g t/b from bullfrog racing. it is upgraded to a 62mm. thanks for your advise but maybe ask before you make stupid claims

ok my throttle will only open up 1/4 of the way then the throttle cable plate on the back of the t/b hits the flange of the magnus intake manifold. please let me know if you have had this problem and know a solution. please no not respond giving me guessing ideas. i need to know only if you have...

anyone??

ok my throttle will only open up 1/4 of the way then the throttle cable plate on the back of the t/b hits the flange of the magnus intake manifold. please let me know if you have had this problem and know a solution. please no not respond giving me guessing ideas. i need to know only if you have...

oh ok do you have them on your 95?? if not then thanks for your opion but opions wont help me out right now i need people that know what they are talking about. there is something on the back side of one of the cam gears i guess that reads the timing on 95-96. theaftermarket ones dont have this...

so has anyone done this mod on a 95

maybe becasue yours is non turbo?? i dont know if they are different. i was told by road race engineeeing that there is a copper strip or something on the back side that the sensor on the head reads

i guess there is something on the back side of one of the cam gears that it needs to run. my car will start for 1 second then dies

are you guys sure they should work?? does any one have them on a 95

well im not saying the wont fit, the shop that i had install them said they wont work. they are on the car but they said something about the cam sensor or something. they are telling me they need to put the stock ones back on because my car wont run. it starts up for a second then dies. i have...

i had a set of cam gears installed on my 95 tsi but the shop told me they wont work on a 95. something about the cam sensor or something?? is there any way to relocate the sensor or a way to get these to work on my 95?? please let me know asap

Yes Thanks Alot Man. Saved Me About $1000

Ok Thanks Guys, I Got The New End Clutch Gaskets From Ipt And Overdrive Works Again:)

Who Is Ipt And Whats There Number

im switching out my trans in my 95 talon awd auto. i have the trans and transfer case and am wondering if i need the torque converter from the 98 or will the one is the 95 work with the 98 trans

ok well the guy that sold me the trans is going to give me the transfer case and al i have to do is pay shipping. SO IS THAT ALL I WILL NEED IS TO SWAP THE 95 TRANS AND TRANSFER CASE WITH THE 98 TRANS AND TRANSFER CASE AND IT WILL WORK???

are you guys sure the 95 transfer case wont wiork with the 98 trans

my auto trans overdrive is out and i found a good used trans out of a 97 gsx. are they the same trans?? anything i need to look for or know before i get the trans?? do i need just the trans or do i need torque converter ect??

i have a 95 talon tsi turbo. i have had the engine torn apart for awhile and i cant find the knock sensor wire. i have the knock sensor hooked up under the manifold but where does the wiring usually come from?? does it go to the ecu or come off teh main harness??

i just got my maf translater and 3" gm maf. my question is its all plug and play except there are 2 wires a white and purple and i dont know where they go. i have a 2g turbo if it makes a difference. please if someone knows let me know asap. thanks

ok i have a 2g and need to know the wiring also. the tps has 3 wires and my 2g harness has 4. also if you are using the stock throttle cable how did you connect it to teh accufab t/b???

ok yeah that sucks.... now can anyone tell me how to install this??

i have the magnus intake manifold and 75mm t/b. can someone help me figure out a few things1. wiring for the 75mm t/b to a 2g?? 2. isc sensor, use one or block it off?? 3. how to connect throttle cable to the 75mm t/b??any help will be very helpful

i dont have a 1g t/b i have a 75mm accufab t/b. 4 wires on it and 4 wires on my tps, but i dont know what color wires go to what color.

lol... tried that.. not very much help. after calling and calling. they gave me a website to go to and it only showed the 1g t/b not the accufab. then they told me the wiring but all the colors where wrong. also these are the guys who told me when i bought this i would need to make no other mods...

anyone??? i am willing to pay if the price is right

guys im still trying to figure this out. anyone help??

im really not sure how much tuning will be need, here are some of my other mods. walbo 190 fuel pump 650 injectors apg t3-t4 50 trim magnus sheetmetal maifold accufab 75mm t/b cam gears

i have a afc and a gm maf. i just need it tuned somewhat and running so i can drive it and bring it to ams for some dyno runs and tuning from them

ok guys i have a few things i still need done to my motor. i had a guy that was working on it for me but he hasnt been able to come finish the job. i need the maf translater wired up, afc, cooling fan, some vacum lines ran to the magnus intake manifold, upper intercooler pipe installed, and i...

so you just replaced the fitting or the whole line??

I Was Installing My New Fuel Pump When The Line That Is Connected To The Fuel Serder Unit Broke When I Was Trying To Take It Off. It Is Rusted Real Bad. I Was Wondering If I Removed The End Of It And Slide A Rubber Fuel Hose Over It And Ran It With That If It Would Be Ok Or If It Wouldnt Hold...

can anyone answer this question???

i have a 1g non turbo with a bad head. i also have a 1g head off a turbo. are these the same?? i know the cams are differnt but what do i need to do to get this head on the non-turbo block. dont care about performance upgrades just need the car running again. please let me know. thanks

I Am Just Trying To Install My 75mm T/b And Sheetmetal Manifold. Can Someone Give A A "how To" Instructions On The T/b. I Dont Know What Sensors To Use On It. It Only Came With 1 One It And A Spot For Another. The Sensor On It Only Has 3 Wires And The Wire To Plug Into It Has 4 So How Do I Wire...

maybe if you read you will see that i have a quwhees widebody kit, so if i have a stock offset wheel they look set way in so i need to have wider rims to make the wheels even with the quarter panels