she runs.. chasing bugs but driving. forgot how much i love AWD boost launches.

I searched and could not find the info I was looking for. My stock line cracked so I decided to use the extreme PSI OFH oil line 20G kit I had, all I needed was the -4 fitting for the FP T28. I took my extra blown FP T28 to my local shop and we tested fittings tell we found the right one...

Here is a EASY way to start the nuts on your head studs. small collapsible magnet 1/2 drive 12pt socket. pics show it all.

it's been waiting, i messed up my hand, almost to the point that i can work on it again. really debating on 272s. hard not to go crazy but i have to remind myself this is my street car. putting the FPt28 back on for now, not happy with the 20G in the 10cm housing.

bla wish my motor was done.. i keep adding stuff.

lol i have 2 one from the old fp t28 i blew up, and one from the current one.

just picked up a 90k 91 longblock. going to change the timing belt, add head studs and change the HG for GP. i will run that tell i can finish a 2.3. still tempted to put the cyclone manifold on for fun. back to the FP-t28, the HRC 20G is blowing oil now.

I work downtown, i used to be around ceder and herndon all the time. and at state allot. but now i will be back to my 93 saturn with a forged motor. prob just throw on my nitrous with a 75 shot on it so i don't go crazy from missing boost.

i am on jackstands now :( when you buy a car from someone check everything . :banghead: i didn't check the crank bolt, so it backed out, lower pulley slid out, broke the keyway and badly crashed all the valves.

If i do the BSE i will lathe down the rear shaft to still support the oil pump. thanks for the PDF reading it.

2GB talon, will never change to an eclipse. Day i got itAs she sits now.Still looking for the wing, and not sure about the sides. kinda like them, kinda don't. if they didn't have the stupid mesh in them it would be better.Alex7747 i am hating... i really want evo 9 wheels.

i guess i can do a side by side. i still have my 4GCS wideblock i was going to use for my starion, but i no longer have that car. one would think the 4GCS would have heaver offset weights then the 4g63.

i have the fluiddampr harmonic balancer, and the place i go to does good work. i plan on using the BC 272's @ 5 degree retard on intake and 5 degree advance on the exhaust to start like keltalon. i would prefer not running the balance shafts, i just don't want teeth chattering like my saturn...

Going to build a 2.3 stroker for a DD. It is worth keeping the balance shafts or not? Also are the 4GCS balance shafts different then the 4G63? If so would it be better to use them? O and i run poly mounts.

Wow that car looks good. i love black, but wow that blue looks so good. :talon: drool

did you do a video of the BC 272 at idle? i can't find a video with the cam timing changes you made. I want to know how smooth they can idle.

people work on DSMs together??? I like this idea...

did i pass? did you try adding 20% denatured alcohol? works for me every time.

anything happen with this meet?

understatement of the century

2100 over year and half, 20+ boost launchs still going, (knock on wood)

i forgot to say sparks... drunk and wired.

i changed the wbo2 sensor again, stupid LC1.. washed my car, pulled the fan again, melted blades. pulled out the apexi ATS silencer. Don't get me wrong it is way better then a non opening silencer, but sounds like crap.

this is the first time i had the t3 setup to the track14.2 with a nice stock slipping clutchhere was the 92 (rip) still have motor 11:1, 2.0L overbore: crower rods, custom cams, JE pistons, ferrea valves, springs retainers, ported head. 8LB flywheel, act 6 puck.here is a...

what do you want to see pictures of? i have some pics of my 92 nitrous saturn also if you would like. fun car, until a 18wheeler side swiped it.

So does anyone make a T4 inlet 3" vband hosing for a HX35? if so i might be lucky and not have to change my exhaust. i would like to try an HX35 VS the BB 60-1 on it now.

gray goose and 7-up FTW!!!

i have to buy one, i could not get Tron bluray 3D to play on powerdvd 11 but arcsoft worked. they are both $100. Anyone have the same issues? Anyone not like arcsoft?

so they lost the producer and a writer from last season. Walking Dead' loses its writer and producer man i hope it does not suck

the fiero gt (v6) was a fun car but no on DD, the 91-92 saturn had the 4-2-1 header. 95 and below would be the way to go.

i have the X41 headphones, sound killer but eat batterys. i have the also have the steelseries merc keyboard. love that thing.

i know there are going to be some haters but.... how about a mid 90's SC2 saturn, fun after you change the springs and exhaust. buy a stick the autos suck and die. they are cheep most people don't steal them and get mid 30s MPG. O did i say they are cheap? before i modded the crap out of my...

what about an SRRRRRRT4 ?

here are a few pics when the manifolds where being built.here is the down before the WG was finished welded to recirculate

I am 32 and just got my first dsm last year. i will never sale this car. in a few years when my Harley is paid off i will buy a new DD, i will drop my race saturn and have the TSI takes it place. i hope to have a 4g63 tell the day i die.

i don't want to add up what i have spent in upgrades the past years... wost was when the 7950gx2 came out. i had to have it... $800 for the card then $200 for the DD waterblock. the gtx280 is still a great card, the only real difference i would see moving up right now is DX11, i am sure i will...

waiting for the next video cards to come out. I play in 3D so i need to stay as close to 120fps as possible. batman rocks in 3D. i have nvidia shutter glasses so i need to stick with them.

quad 280s? on water? i have a 4th gtx280 on water but it is in my backup system [email protected] everything i had read said the difference from trisli to quad was not worth it. hence i bought the formula not the extreme MB. only reason i wish i bought it now is the lack of waterblock for the formula

plus 100000000000000000000000~~~~

when i started building my saturn i wanted to build something not everyone and there mother could go out and buy parts for. i wanted to be different. yes the dsm is more user friendly to mod, i had to build my harness and MS2, not just buy a chip or ecmlink, my turbo manifold is made from SC40...

into

it is fun. i have custom built progress coilovers. they made them for a short while, really ride nice. but now i put in stiffer springs for scca. this has been a really long process getting things built. I started this before i got my DSM, but i am going to finish it. i must say though after...

O and all the lines are 1/2" ID 3/4" OD

it has custom grind turbo cams. need more time with it so i can get it to idle down. i was lucky and got uncut blank cams from someone who used to work for saturn so i have them waiting when i find the profile i like. o.. here is a pic of the head, EGR port welded closed, water port moved to...

click on the last pic, that is a video

they still work, granted no DX11, but i can play anything i want. 1920x1200 (dell 24") 1920x1080 (asus 3D) they will peak to 55*C full load, O and the cable coming out on the right goes to my fan controller, had issues with X64 drivers so used my laptop to set the maps. Uses 2 water temp probes...

i used fulidxp coolant. non conductive and it works. had a POS fitting snap that came with the reservoir emptied it all over the MB. i shut it down cleaned up the mess no prob. now i only use bitspower fittings.

i had an old T3 setup on a stock motor that would run mid to high 13's. So funny spanking people in a saturn. this is my old setup that i DD for years. i had the IC anodized black and painted the fiberglass ducting around it. without cutting there was not room to move the air filter out of the...

......................................... if you look close that is the charge pipe from the 60-1 going around to the IC, you can see from the silicone couplers on top.

i have been liquid cooling my PCs for about 10 years... parts have come a LONG way.