Ok I have the Carbonetics hood oem style so I guess it’s lightly constructed as well. So you got the hardware from the eBay hood strut kit and used the PM1071 struts? Why didn’t you use the struts from the eBay kit? I like your brackets that you put on the hood hinge but don’t want to buy that...
The eBay kit is good but the struts weight rating is to high. I don’t need the hood to lift up by its self I can do that lol but I don’t want cracking when I’m closing the hood.
Does anyone have a DYI ideas for Hood struts for 2G with carbon hood??
A carbon hood is lot lighter so 300m hood struts won’t work or any struts for a big hood. I’m thinking a 15lbs strut but I’m not sure the length.Maybe someone has the right length I would need?The eBay kit(with the red...
3000GT VR4 6 speed J4G LSD diff3.307 gear ratio used for Auto dsm/Evo 7-9(that’s my understanding can be wrong still looking into it)$700US plus shippingAny questions dm me
Thanks.. I did see that post I’m just checking real. You know people just post stuff maybe someone else had experience with this it’s always better to have a few people saying it then just one. I don’t use a cover so if that’s the only thing stopping from using a 95 late tensioner on a early 95...
Ya I’m going to do 7bolt pan extension like I did to my 6 bolt pan with kiggly mod oil pick up.
Does the kiggly mod have to be done to the 7 bolt oil pick up as well when the pan is extended? Does anyone have any pics of a modded 7 bolt pick up??
2G shifter base with T1 strain gauge when used in conjunction with an engine management system that supports a strain gauge output for powershifting, will help you achieve those lightning quick shifts. This shifter was also re-enforced.I bought this shifter with strain gauge off Boostin...
I have a carbonetics carbon bumper without the opening for sale. if you’re interested pm me I’ll send pics
I bought it waited 7 months for it but can’t use it on my Front facing turbo set up. I have to buy the talon 2GB instead for to work. I bought my setup around the Talon bumper not knowing...
All the cars I know run -10 not -8 and I heard -12 helps with the fuel cranking I guess more fuel going in the pump... that’s why I’m asking if anyone uses -12??Also do people run stock of aftermarket cam gears??
I know it’s an old conversation but dose anyone run -12 line to the pump?? Also do you have to run an electric pump? Doesn’t the mechanical pump not draw vacuum?? Front fuel cell not rear. Thanks
I have a carbonetics eclipse 2G front bumper no opening and a 4” drag lip just like Boostin performance has on their drag car but made out of carbon. An opening can be made if you want to opened it up to work with your intercooler size. You can make it as big as you want.I just got it from...
Brand New Syvecs S6 GP. Same computer that's in the Magnus Motorsports 2G DSM. I've decided to part out my car and never got to install this.1800$ shipped.Comes with:- THE ECU- Connector- A bunch of extra pins (both big and small pins)- I'll throw the crimper in as well for...
Hey guys anyone have experience with installing the carbonetics rear carbon quarter window deletes?
Have the glass off just not sure the best way to install them!!Thinking to use rtv black silicone but before I use that just wondering if someone has s better way?Thanks for your time
Just wondering if anyone knows why this 6bolt oil pan is indented like this?(dirty one with the green block oil drain side)
Never seen it like that before.
All the pans ive seen or the one I have is flat like the STM pic (drain plug side)Thanks for your help
Thanks @donniekak
Any idea about the 2nd piece of the driveshaft what would I do there?
That’s some good 60’ times so I guess you can say 3k rear end is a good upgrade?
Hey guys just wondering if anyone has any experience with a 3000gt rear end in a dsm?
I’m thinking of putting a 3k rear end in my 2G(yes I know I need a subframe, Axles, driveshaft ect...)
One thing I don’t know is what 2nd piece of the driveshaft do I use the smaller one between rear...
Ya I figured that. Just seeing if anyone has had a 2G drag wing made by Carbonetics? And if so pics I emailed them but I know they busy so not sure how long it will take to get back to me. So I figured lets try here.
Hey does anyone have any pictures of a Carbonetics Drag wing on a 2G?
They offer it for a 1G not 2G so I'm guessing its the same wing so I'm just wondering if anyone has pics of it on a 2GThanks
Hey guys I have a set of FIC 1650cc injectors for sale. They are coming back from FIC today cleaned and flow tested. Have the Flow sheet to prove they are cleaned and ready to go.Looking to get $650 shippedWill have pics tonight will post when I have the injectors back. Comes with pig...
Hey tuners,
I'm building a drag car and I'm not to sure if I lock up the front or rear with the staging brake.
Can anyone help me on how I should plumb it? I am running a Chase Bays Brake Booster Eliminator and its a non ABS 2G. I have a CNC staging break that I got from STM but I didn't get the...