The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support Fuel Injector Clinic

Search results for query: *

  1. Did your ACT clutch fail on you? If so, post here

    I put my act 2100 clutch on and 25 miles later i blew the rocker arms all over my head. 1st mod i did and never raced the car. I know it couldn't be from the clucth but the timing belt had 15k on it with no problems. Drove the same after clutch install. Who Knows!
  2. Quick Cylinder Head Removal Question-

    I didn't snap but had some more than average wear-
  3. 95 Tsi wont start its building no compression

    Take the Valve Cover off to see if there is any Visible Damage. Our Cars can Start with Pretty low Compression, May not run all that well but will kick over. Are you Getting Fuel and Spark Also.I just Had a problem where I took my valve cover off and blew the rods right off my intake side. I...
  4. can a car drive with a bent valve

    I think you can drive on a bent valve- keyword "a". But if you think you have one don't be stupid and keep trying to drive. Chances are 7 more will go maybe even 16 in my case!! I even messed up 2 pistons from floating the valves. Not a pretty site when you take that head off.
  5. Quick Cylinder Head Removal Question-

    I would of Felt like a real @ss if I ended up removing them- Thanks for your help guys! Broke the head free today! Bent 16 Valves and damaged two pistons- The same day i installed ACT 2100 Clutch and findanza flywheel. Could that of helped it out any?
  6. Piston Damage in 2 Cylinders- Should it replaced?

    Make a Long Story Short...... I blew the rocker arms off the intake side, Pulled the head off all 16 valves were sh!t!!! 2 of the 4 Pistons have damage from the valves smashing into them. Is that Floating valves? Not Sure....But they are little gouges. Will that affect performance>?Also is...
  7. What do I do now?!? (Engine/turbo decision)

    Get a used 6 bolt block, 2g pistons. Drop that 7 bolt block like a bad card hand. :)
  8. FFWD Connection Cams

    Brian, How'd you make out?
  9. Quick Cylinder Head Removal Question-

    Thanks for saving my a$$ and about $45 on a snap on socket.
  10. Quick Cylinder Head Removal Question-

    I removed the head bolts close to the wall of the head. There may have been 10 of them. I have the Manual To my Vehicle which says the head bolts were 13 mm allen which they weren't. But I see 3 gold bolts in the middle- Are they supposed to be removed? Anybody know what size they are? I tried a...
  11. Any Modification for 1mm Oversized Valves???

    Is there any Kind of Modification or Supporting mods you need to install/use 1mm oversized Super-flo Valves? Im not sure this is a newbie question due to I don't know many Newbies doing headwork. Thanks for your help!
  12. Is porting a 2g head worth it?

    Just Do the 1g Swap Head and Intake Manifold. Buy a Cheap Head on Ebay and do a P&P.
  13. Any1 know the Lowest Compression in a 1g and still start?

    I guess i already said that! But im upgrading to 3g lifters, super flo valves, cams ect. Just a little sooner than I wanted too!
  14. Any1 know the Lowest Compression in a 1g and still start?

    You weren't kidding all 16!!!!!!!! :mad:Intake Rockers were spread across the head from one side to the other!
  15. Any1 know the Lowest Compression in a 1g and still start?

    Well i did the test i got 0 0 0 and um 0. Took the valve cover off and guess what i found? My Intake rockers from one end to the other!
  16. Any1 know the Lowest Compression in a 1g and still start?

    I just wanted to know the lowest compression you could have and still start. I have fuel and spark but it won't kick over. Anybody recently do a compression test? Numbers would be appreciated! Thanks Again!
  17. How much Compression?

    Yeah im not even starting at all- I checked fuel it squirting.... I did the ether in the t/b and i got no dice. Im getting Spark also.....I thinking a time traveled or somthing! maybe the belt Skipped a tooth>? It's driving me Crazy! Only time will tell! Thanks for your input!
  18. 4g63 Outdated?

    As for the 4g63 being outdated hmmm im sure there is a hole hell of alot of us that don't give a sh!7!!! If we did we wouldn't be here! My opinion it's Still going strong and will be for years to come. I think its a Great Base and has many possibilities! Yeah we have alot of competition today...
  19. How much Compression?

    Hey I posted a couple weeks ago - "One 1g won't kick over" Anyway, im about to do a Compression test and I wanted to know if any1 knew how much Compression you need in each of the cylinders to run our Cars?All feedback is Greatly Appreciated! Thanks!
  20. 1g Wont Kick over...... Please Help!

    Im Deff. getting Spark...... So i waiting on my Walboro 255 and I guess we'll see what happens.Thanks for the help and other information is Appreciated!
  21. 1g Wont Kick over...... Please Help!

    Yes the Car Cranks but thats it. I don't hear the fuel Prime at all but I never payed attention to it-
  22. 1g Wont Kick over...... Please Help!

    Everybody don't chime in at once now! :| Any input would be greatly appeciated cause my car is not moving!
  23. 1g Wont Crank- What are the possibilities? I need help!

    I just put a brand new act 2100 Clutch and findanza flywheel on a pretty much stock TSI FWD. I was Racing a Monte with no cats so I couldn't hear anything happen. But after I left my car was whining really loud at idle and throw the gears until it finally died. I pulled the timing belt cover off...
  24. Boost leak or lag?

    Upgrade the wires.....As well as the coil pack you could do it for under $100 if you look well enough.
  25. Having serious problems, where to take it?

    Im with him have SLOWBoy check it out it could be somthing serious! They are great
  26. Having serious problems, where to take it?

    I had that Problem before.....but it was because i let someone change my oil when i broke my arm.....won't do that again! Anyway it leaked from the filter because they tightened it to much and blew the seal! almost blew the engine!
  27. 1g Wont Kick over...... Please Help!

    I don't hear it primeing when I turb the key- The Crank Spins but I never listened to the fuel prime so it might but I don't hear it. Whatever went it was winding like I had a supercharger before it bent. Like I said timing belt is still intact. Thanks for your help!
  28. Have Problems with 1G won't Crank- Please Help!

    I just had a Brand New ACT 2100 Clutch Put in along with a findaza flywheel- I was out last night and i gave it a couple runs probably before I should of.... Anyway I went all out on it a few times a it started to whine at idle through Gears ect..... then finally it just died. I took off the...
  29. 1g Wont Kick over...... Please Help!

    I just had a Brand New ACT 2100 Clutch Put in along with a findaza flywheel- I was out last night and i gave it a couple runs probably before I should of.... Anyway I went all out on it a few times a it started to whine at idle through Gears ect..... then finally it just died. I took off the...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top