The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support ExtremePSI

Search results for query: *

  1. Should my lifters do this???

    I have had my 92 talon off the road for the winter and since spring is comming it's time to get 'er out again. My lifters on my to-do list before it gets out though, they make more ticking that you can even imagine. I removed the cover so i can see what's going on and I see that some of the cam...
  2. HKS SSQV knock off's on EBAY??? Any good???

    I am looking to get a ssqv BOV but they are $$$$ and found some knock off's on e-bay for dirt cheap!!! does anyone know if they use the dual piston design and if they last at all??? let me know if anyone runs one and even how they sound, I run a turbo xs RFL and enjoy the loud as hell BOV, ;) I...
  3. FP3575 (when do they spool up????)

    thanks for the replies!!!! It seems like the 3065 or the gt35r would be a great choice!!! The chances of maxing either turbo out on pump is unlikely!!!! Which one of these turbo's is better???? Does one have better designed wheels, more reliablity, higher efficiency?????I know they both have a...
  4. A ton of Knock

    Have you tried pulling the plugs???? see how they look, that always will let you know what is going on!!!!!!
  5. who runs a T70????

    thanks lot for the replies!!!!! and thanks for the backup there 99gst, appreciated...... I couldn't find out any info on this turbo and after seeing that 84 lb/min rating, it is an obvious choice....... I just see them for cheap on the internet, I am a daily driver though, so I will see what's...
  6. A ton of Knock

    One thing that you may be able to do it check that the knock sensor is properly screwed in, make sure it is not loose or cranked right in there...... Obviously, your 02's should be around .85 with pump...... You can also get rich knock, I hate that misfiring sound!!!!! Ceck for boost leaks which...
  7. do i need a FPR?

    In my opinion, a FPR could help if your compensation through your safc is significant, which causes you to be in a bad timing map..... The fpr will allow you to sqeeze more out of injectors, and allow you to completly move your fuel curve leaner or richer...... I don't know if it will give you...
  8. who runs a T70????

    I am looking to get a t70 BB turbo..... I know it has an ar .84 turbine, .70 comp with a 64.5 trim wheel...... If anyone is running this let me know how it works as for spool up time and surging problems, P.S. I am running a 2.3 stroker so let me know what ya think, thanks for any input
  9. FP3575 (when do they spool up????)

    I dont see that being possible with a 75 lb/min turbo. The one that I have got(52lb/min) spools up to 20 lbs at that rpm....... I will maybe give them a call if no-one replies with an accurate amount, thanks for the reply
  10. FP3575 (when do they spool up????)

    I am running a 2.3 stroker and am looking for another turbo that will make a significant amount more power!!! I have got all of the supporting mods with the exception of an exhaust and intake manifold. Please let me know what that turbo spools up at for anyone running it or what you think that...
  11. HELP!!!Will an EPROM CHIP make much more POWER????

    thanks for the replies everyone!!!!!! Could anyone tell me if increasing your fuel and timing maps on the eprom will make much of a difference at all???? From what I can come up with, the timing map should be fine since it will continue the end timing value which I think is 22 degrees if you...
  12. 15,000 total and only a 12.1@119???? I'M SLOW,HELP ME

    thanks alot for the replies there eveyone!!!!! I am going to be getting that eprom hopefully in about 2-5 days..... waiting for the programmer and some chips...... I will post when I get it in and see what happens........ You should see my logs though, 25-30 degrees of timing WOT is what it...
  13. 15,000 total and only a 12.1@119???? I'M SLOW,HELP ME

    I didn't think that was the best :nono: :nono: ... I am getting an eprom with enhanced timing and fuel maps to compensate for this.... Do you think this is going to bring some significant power gains?????? thanks for the reply
  14. 15,000 total and only a 12.1@119???? I'M SLOW,HELP ME

    I put about 15000 total into my car, you can see the list of mods that I have got from my profile!!!!! I have been to the track twice and all that I have been able to pull off is a 12.1 with c12 race gas @ about 27 psi...... Why is my car sooo slow is what I want to know.... I think that I am...
  15. HELP!!!Will an EPROM CHIP make much more POWER????

    I am currently running a heavily modded 1g with 880cc injectors and no tuning equipment besides the assistance of a MAF translator!!!! I am going to upgrade to an eprom with a chip and am wondering if you really pick up that much more HP?????? I would think it helps but what would be expected? 5...
  16. HQ and cheap tubular manifold???????

    I am looking to but a tubular manifold and don't want to spend the 650 for one.... Does anyone have a hookup for dnperformnace ones, or HQ SS manifolds that would match or surpass that quality??? I need one with no wastegate flange and one which has the exact dimensions of a stock one.... I...
  17. Bad Gas Mileage [Merged 9-6]

    Call Lordco....They have K&N fuel filters for little over $100 and they are washable.I went with the a Inline fuel filter(which was ment for a boat,you can install it in the back by the gas tank)It has dual line inlets and it right there so it's easier to change.
  18. Which clutch [Merged 3-9] what clutch best

    I am also running an act 2600 and it has been great!!!! I would recommend a 2900 and you always mix up the discs so that it can increase clamp load up to 300%!!!!!! that should do ya fine, cause I bet that turbo will be flowwing enough that something else will be going before that clutch would...
  19. Got a Wicked 60' time!!!!!!

    That is awsome for that amount of boost!!!! That turbo is BIG and flows great cfm's at low boost.... It would be nice to see what the improvement would be when you get an external wastegate..... you make me jelous that you got the 60-1 :mad: :mad: ..... good luck man :thumb: :thumb: :thumb:
  20. Got a Wicked 60' time!!!!!!

    About launching the car, I figured it out last weekend... I rev to about 5-5.5 k, and fluxuate the throttle so it helps spool the turbo off the line, let the clutch out about 1/4 the way slowly, then let it out QUICKLY, not sidestepping though!!!! the tires would brake loose all the way throuhg...
  21. Got a Wicked 60' time!!!!!!

    my tires defiantly didn't help,I'm going to get a new smaller set for going to the track(like 15's 0r 16's)....We left last minute and i didn't have time to change them over(i was just gonna put the stock ones back on)Like i said before, i was having so much trouble getting traction.When i...
  22. Got a Wicked 60' time!!!!!!

    I have a 57 trim and on th 119mph pass we had the boost at 25psi!I'm thinking about upgrading to a 60-1.......I'm still undecided though:thumb:
  23. Got a Wicked 60' time!!!!!!

    Went to ashcroft this weekend.Frantic racing(top fuel harley)rented the track for the day and my mechanic and i got an invite!!How do you say no to that? i was the only car racing...wicked day to just play around and tune. :DI had the 18's on,it was hard to get traction but when i did :eek...
  24. My Custom Emblem/Logo

    NICE there EclipseTrbo420A, that looks awsome man.....and as for the comment "defiant" made:"Go easy. He's dislex... dyselx... disle... lidselx....He's not good at left-and-right."that is kind of funny coming from a guy who's car has the largest mod being a 1g BOV ROFL ROFL...
  25. SS exhaust manifold... Any problems with cracking

    I have been thinking about getting an exhaust manifold and I was going to get the SBR cast manifold, but I can get my hands on a SS tubular for cheaper... The guy who built my car said that they have a tendancy to crack and he is very knowledgable in the performance side of things.... Has anyone...
  26. 14B dyno record

    One of my buddies @ rmt in Salmon Arm ran a 12.94 @ 102 mph with the 14b.... He was running straight c16 and advanced the timing.... running 450's with a FMIC, 2.5" piping and no tuning devices at all except a FPR!!!!! He had the boost up at 24-25 psi and ran a 1.8 60 foot time..... automatic so...
  27. My Custom Emblem/Logo

    I know it's slanted a bit :( , I fixed it and painted it red behind the logo so it should look a little better now, i will post a pic right away here!!!!!!
  28. 3" or 2.5" intercooler piping????

    I am currently running 3" intercooler piping and am thinking about switching the piping from the intercooler to the TB to 2.5 inch.... I would do this for the idea of increased velocity, what do you guys think about this threory to make more power????
  29. Timeslip...1st time at the Track!!!

    YA YA I know LOL! Any how since it was my first time i missed a couple of shifts a couple of times :coy: and my car did need to be tuned(25 counts of knock).I also only ran 4 passes because i blew the crank.I also have a new clutch on its way(the ACT 2600) my car was having some trouble.I...
  30. Timeslip...1st time at the Track!!!

    This weekend i took my car to the track for the first time.This is the time slip of my best run :D !!! I didn't get outta the hole to good.For some reason my car wasn't running properly.(i had 25 counts of Knock!!!!)I also had to bring it home on the tow truck :cry: (I'll be back to the track...
  31. Idle's @ 2200 after warm!!!! Tried everything.. HELP!!!!!

    For about a month now, I have been having some horrible idling issues..... It seems to have started after I put a big set of cams in and right away put the stock ones back in!!! When i start my car, it will idle @ 800'ish and after I drive a bit, the idle will work it's way up to 2200 rpm and...
  32. My Custom Emblem/Logo

    Even thou i'm not the first person to do this,here area couple pics of my custom emblem.....Oh and the rock chips.....those are aftermarket :shhh: ;)
  33. Reground cams?Any problems??

    I don't think that these cams were hardwelded and reground.... they copied that profile of the 272's onto the stock cams... the stock cams are much smaller now but have got the exact same ratios as the 272's, so i think that all i have to do is shim the lifters 80 thou!!! does anyone know if...
  34. Reground cams?Any problems??

    I borrowed a set of 272 cams....I got the stock cams reground to the 272 profile.I know i have to shim the lifters but is there anything else major i should know about?From what you guys have heard/experienced how do reground cams work.Thanks :)
  35. New Fuel Pressure Regulator Installed!!!

    I just wanted to state that FP is at 20 psi, i thought that it was at 15 but the mechanic turned it up to 20 psi..... i know that is still low..... i will get back to you asap and figure out what his explanation was that caused a better timing map from lowering the fuel pressure... thanks for...
  36. New Fuel Pressure Regulator Installed!!!

    If i have a 57 trim ,880s, MAS & MAFT (2.3 stroker)what would you guys suggest my base fuel pressure be set at????I've been reading and it seems most people with 680s have their base fuel pressure set at 32 to 38 psi?
  37. New Fuel Pressure Regulator Installed!!!

    I just installed a NOS Fuel Pressure Regulator...I run 880cc injectors so i dropped the fuel pressure down to 15 psi and that created a way better timing map.My mechanic suggested i get one and i had no idea it would work so well.Now i have more torque down low. Here are a couple pics.....
  38. Getting new turbo, input on choice!! 60-1

    I am currently running a 57 trim t04e, and it has been working quite well... my mechanic said that a 50 trim would be better becuase it will spool up earlier and still pull well past 7000 rpm.... what do you guys that are running the 50 trim think??? please let me know how it pulls and when you...
  39. bought too big of cams, need opinions for new ones!!!

    i know that they are going to and i think that they are the fp3's.... these are bigger than the 272's and i would be leaning away from these because if the lack of torque..... Please let me know how your 272's are doing for you, since i have a chance to get that profile for cheap, thanks alot...
  40. 50 trim???who has a 50 and how do you like it??

    I am currently running a 57 trim t04e, and it has been working quite well... my mechanic said that a 50 trim would be better becuase it will spool up earlier and still pull well past 7000 rpm.... what do you guys that are running the 50 trim think??? please let me know how it pulls and when you...
  41. bought too big of cams, need opinions for new ones!!!

    i just installed a set of racing cams(276/274 with 0.415,0.39 lift) and the thing would bog out if you go below 2500 rpm....... the problem with them was that there was NOOOO torque at all.... what is the best set of cams that will attain the same amount of torue of stock cams(very close at...
  42. New cams installed HKS 272s

    i just installed a set of racing cams(276/274 with 0.415,0.39 lift) and the thing would bog out if you go below 2500 rpm....... the problem with them was that there was NOOOO torque at all.... what is the best set of cams that will attain the same amount of torue of stock cams(very close at...
  43. Post your experiences with Emissions laws in your province (Canadian Emissions)

    ^^^^^^The same thing just happened to me!!!I was driving home not drunk high,or being reckless,when this cop came outta now where and pulled me over :cry: The cop came up to my car did a walk around and procceded to tell me how much she didn't like my BOV or the loud exhaust.....She told me she...
  44. Intercooler Cleaning IC [Merged 11-7] clean smic fmic

    i didn't read all of the other replies, but the best way is going to be a good steamcleaning, unhook the thing so you can realy get at it and get the best results... it should help a bit with the tiny side mount, they get sooooooooo hot that any bit would help out.... :dsm: :thumb: :dsm:
  45. Rear View mirror questions

    I hope that your mirror is fixable.... if you try to fix it and it doesn't work, just pop the sucker off of the window... I am quite sure that you don't need a rear view mirror, at least where i live... i had put a bass cd in my car and it shook the rear view mirror right off... i know it is...
  46. Turbo XS H-34 Bov Recirced...??

    have to say this: this BOV can't be ricy because a rice rocket is a 110 hp, 6" tip mufflered piece, that has NOOO TURBO!!! it is going to sound like you got balls under the hood with the bov when you shift..... :dsm: :thumb: :dsm:
  47. Turbo XS H-34 Bov Recirced...??

    i am running the rfl and it is releasing into the atmosphere!!! i am glad you decide to recurculate the BOV because i had the rfl on the stock maf setup and everytime i would go to stop, the car almost stalled out, stumbled under boost, man it was horrible..... anyways, i think that BOV isn't...
  48. am i running TOO MUCH TIMING UNDER BOOST???

    i recently got my car finished and am still in the tuning process... i am currently running about 20-25 psi, and off boost the timing is at around 30 degrees and under boost i am around 22-26, dependant on knock.... what is the ideal amount of timing....my mechanic says that around 19 under...
  49. webcams 276's (racing cams)

    doesn't seem like anyone has these cams, does anyone have an equivalant cam???? if so please let me know how they are working for ya, and if there have been any problems with them like no power till 6000 or valve float, :dsm: :thumb: :dsm:
  50. Fuel Pump Whine

    i would agree with the idea that it is your fuel filter... if it was your fuel pump, your car should still build boost but fall on it's face because of the lack of fuel(lean pop).... i wouldn't bag your car at all cause it could be running very lean.... e-bay has walbro's for cheap(a great...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top