Ok im gonna buy new set of USED tires this or next week.
Most used tires places usually have a hard time of stocking 4 of the same brand sized tires and i know how important it is to have matching tire sizes on all four corners!Different tire manufac's make same sizes the once mounted some...
Yes, i am on a stock motor.
Its kinda hard to compare the 14b and 16g at low power/boost levels because everybody has different mods & i cant find a stock for stock comparison...
Ceramic turbines have been known to shatter and cause some nice engine damage in the past. I dont trust them... They are really nice peices for spool, but the risk isnt worth it for me.With that wheel, the turbo would bring me to lag city as well
Yes. Im puting a mitsubishi turbo on my dsm for several reasons:
1- Theyre dirt CHEAP
2- Readily accessible
3- They have much much more potential than the stock mr2 ct26 turbo which is no good after 15-16psi and MAX 240rwhp with all appropriate mods in place while fuel runs out at ~275rwhp
4-...
Ok i have H&R sport springs on my 95. Im pretty sure the toe was corrected after the install but the car doesnt have a camber kit. If i turn my steering wheel hard the car jerks very hard and it seems as tho im im starting to fish tail. Basically the handling is CRAP and im sure i need a camber...
Acura center caps can be taken off in umm 25 seconds?The gsx rims are really ugly IMO... I have 01 eclipse who knows what model wheels right now.. I need new tires so i might as well get rims along with em is why im "upgrading"I still want to see what the rsx rims would look like in...
Im going to get new rims soon and im considering97 chome gst wheels VS Rsx wheelsCan somebody photoshop wheels on both of my cars or another 2g?
Heres a pic of them on 1g:
http://www.dsmtalk.com/forums/showthread.php?t=130649&highlight=rsx+rims
&...
Describe the noise? Does it really sound like a beep or a clicking?Do you have any sort of aftermarket electronics that could be making this? If its a clicking or tapping it might be some smog related solenoids, that is if your car is equipped with smog stuff.Do you have tough smog...
I would stick with a regular "cone filter" that is good.. I dont trust these sponge things and i would be more worried about which of the two filter out particles the best...Try disconnecting your battery for 1 min and putting a few miles on it to see if the computer makes any changes
YOU BETCHA!After i would boost hard (12psi stock) the car would just cut out on me. I went down to mitsu dealer and got seals and the rubber grommets that let the injectors sit down on head when i dealt with the problem. I replaced them all and i never had a problem with engine cutting out...
Ok im gonna buy new set of USED tires this or next week.
Most used tires places usually have a hard time of stocking 4 of the same brand sized tires and i know how important it is to have matching tire sizes on all four corners!Different tire manufac's make same sizes the once mounted some...
Im not sure about your engine cutting out problem but it will definately help the idle.
I went from a 1300rpm idle and now i'm at a 900rom idle b/c i replaced every seal on the TB.You have no other boost leaks?
2 Injecter seals on my car were blown and i had a problem like yours as well...
Can anybody help me with my logger during the meet ? :toobad: I cant get the damn thing to get a signal from my car...Just throwin the request out there b/c i was gonna ask anybody i see with a 2g and logger out there on saturday anyway :-)
Summertime is here and we should definately make the effort to have hangouts at least once a month since it is hard enough planning it as it is.4G64T, as long as you love dsm's then your good in my book.So lets get a COUNT on how many people can are willing to make the meet despite the...
28th is A OK for me as well.
Who else can make it on the 28th?Bbq or not it doesnt really matter to me.. I can see how a small turn out would not be worth the trouble for food+grill+drinks..etcNow for time.. I can bring my bike and leave my car in the lot so ill plan to be there...
Yeah your right, alum rock sounds good as well.Im gonna have to bring my mountain bike if we go there though ;-)
Anybody ride? 00 specialized big hit (not long travel or anything) hereIf i cant put on this damn cv boot clamp im gonna have to replace my axle before the meet OR i can...
(drivers side)
Yeah i know its real ghetto!!!
If i clamp the boot further back will it clear the oil pan?I went through 2 cv joint clamps but they both are really cheap and didnt work well at all! It left the boot very loose and i couldnt tighten it anymore at all..Cant find a damn...
I have the popping noise as well. As soon as i press the clutch to its disengagement point i hear it. Mine sounds like its coming from somewhere under the hood in the tranny area.I have no clue why
No your car is not safe to drive like that!Take off the vented BOV and ur mileage will go up.
Fix the running rich problem because it is not good for your car or o2 sensors.Autometer gauges are good :-)
Ok so i was going to replace my drivers side axle, but i decided not to because the outer end of the axle was frozen to the hub...I took off and re torqued everything that is in this faq http://www.vfaq.com/mods/CVboots.html (i stopped before i could take out axle from hub).So take it...
This might sound funny but Napa auto parts now has a Machine shop in back of their store.Its in san jose on montery rd location. GIve 20% off to new customers. Napa has always known their shit, but ive never had experience with their machine shop.... Id talk to them to see if you like what...
Why go all the way out to S Cruz when Lake Cunningham park is basically right across the damn street from IN-N-OUT ? I say keep it in San Jose. Im sure there would be a bigger turn out if we kept it local in south bay. Id have to reconsider going if its in S Cruz because im strapped for time as...
Those are jack points. I havent been able to put my jackstands on those pinch points ever because ill end up cracking my side moulding/skirt.I put my jackstands right where a lift would put them; right on crossmember where part of suspension bolts onto unibody frame.
guitarXgeek is RIGHT. When i relocated my battery to the back i actually was missing a purge valve (clamped onto the side of canister and looks like a ball with 2 lines going into/out of it) and i THOUGHt i was missing a hose on the circled nipple.Its supposed to vent to the air or...
I just looked at my car and i saw the 4 wires grounded at one bolt on firewall behind battery but i dont know what mystery wire your talkin aboutThe only other wire is a real thick wire that grounds to a bolt about 4 inches about the 4 small wires.
EVO III head youd probly have to buy from one of the vendor sites.
I would look for ported or used heads at this site of course, dsmtraders.com, ebaymotors personally.
Supra SMIC as well.I think the stock SMIC would be good enough.
Do a search for it. Correct me if im wrong here ppl but i don think there is much hp to be made from just SMIC or changing the pipes except maybea a faster spool up speed. Try doing free mods to vent more air into that SMIC.
Maybe you would just fill out a transfer of title form or just fill out the pink slip info on the back?www.dmv.ca.gov or schedule appt to go talk to a dmv person?
Yes, the round springs that give tension to open throttle plate by pulling on throttle cable.Theres 2 springs; 1 big (large diameter) and 1 small one (small diameter).
I twisted the small one around 3 times and the big one twice and i think im gettin TOO MUCH tension! I probly only put down...
Wow, im not even that low!I almost doubt that it is b/c my suspension bottomed out, I mean, my iiner fender is sheet metal and this control arm is much thicker and stronger thatn sheet metal. If i look under my fender tmmorow and i see marks that match this damage then :thumb: to you. I...