The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support ExtremePSI

Search results for query: *

  1. 90turbotsi

    where are all the dsm people in Harford/Baltimore county??

    Sorry for the no show saturday halfway there my car started fuel cutting and misfiring really bad at every rpm and under any load. Took the car home switched plugs, wires, coil pack, ignitor/transistor, and checked all of my dsm link setting and all were still where i had set them many months...
  2. 90turbotsi

    where are all the dsm people in Harford/Baltimore county??

    Good to hear well i will be up there around then in my red 2g gsx. Trying to see if either my girlfriend or my friend will be able to bring my fathers 90 tsi up since he is working.
  3. 90turbotsi

    where are all the dsm people in Harford/Baltimore county??

    Still meeting at sears in Hv around 6-7 tomorrow? I would love to join i only live ten minutes away from there.
  4. 90turbotsi

    baltimore dsm

    Reisterstown/Owings Mills
  5. 90turbotsi

    CAS Check Engine Light Nightmare?! Any ideas

    So I have pretty much gotten no where over the last week of toying with the car in between work and other projects. The car (99 GST, 6 bolt swap which has been in for a few years) was my reliable daily driver until the crazy winter we had here and I decided to pull her apart and throw on some...
  6. 90turbotsi

    Sheetmetal install, now im getting CAS code!? Help please

    So heres the run through... cars a 99GST with a semi built 6 bolt swap. I did the swap about 4 years back and its been nothing but perfect to me (knock on wood). I decided over the winter (Jan) to tear into it and do a Magnus SMIM, Slim Braille battery, FP race exhaust manifold, and ditch the...
  7. 90turbotsi

    Possible meet/hang out in Baltimore?

    Definately that would be awesome my brothers have dsms also so there are a lot at my house... we all need to find a good weekend to meet up
  8. 90turbotsi

    Possible meet/hang out in Baltimore?

    Hey! Glad to see there are other people on here that go to Towson University. Never seen your galant around campus but you may have seen my red gsx!
  9. 90turbotsi

    possible OC meet June 5 and 6??

    I was there last year in my red 2g GSX
  10. 90turbotsi

    6 bolt engine question

    No you do not need a new tranny you use your 2g transmission
  11. 90turbotsi

    HKS Cam part number verification

    I browsed the net a bit and here on the forums but I am not finding exactly what I need. Basicially I picked up a set of new HKS cams online. They were listed as HKS 272's bolted in a motor that was being built but never used. They arrived today and would pass as new for sure.Heres the...
  12. 90turbotsi

    How old were you when you started building/tuning your cars?

    I got my first dsm when I was 14 not even a sophomore in high school, from when i was about 12 years old i wanted a dsm as all of my family members have one. Now I am 19 almost 20 and lets say there has been a lot of ups and downs and a lot of empty bank accounts but i would not ever give up my...
  13. 90turbotsi

    Good Mech shop near Baltimore County

    Yes from my experience i would have to agree Lascuola is a tad bit pricey.
  14. 90turbotsi

    Good Mech shop near Baltimore County

    Yeah i cut grass on berrymans all the time out in deer park and such.... I live on thoroughbred off of bonita and Owings mills Blvd
  15. 90turbotsi

    White Marsh Meet 2009

    1. silver06evo9mr (Dave + Becca) 2. jayman089 (maybe) 3. sik4g63 4. concretetsi (tony) 5.murf_dirty (Jay) 6.TheOctane (Adam) 7.90turboTSi (Jeremy)
  16. 90turbotsi

    Good Mech shop near Baltimore County

    If you need help I would be willing to help I will be commuting to towson daily I live in Owings Mills right off 795 and have multiple gsx's n Tsi's all with built motors and a galore of tools.. let me know i would love to do this swap for you if you would like or meet up sometime to talk. Jeremy
  17. 90turbotsi

    Finally got my 450R

    And yes dougR it is quite possible to have a snorkel on a trx 450
  18. 90turbotsi

    Finally got my 450R

    Nice! My buddy has a Red 07 Trx 450r jetted with an exhaust and some other accessories that quad is so ridiculously fast pulls wheelies when you lay into it just a little too mush. I was looking to buy his 2006 raptor 660 off of him but it weights so much more then the trx. And last week I...
  19. 90turbotsi

    How old is everyone?

    18 almost 19, I bought the Red GSX when i was 15 about a year before I even had my learners!
  20. 90turbotsi

    Catonsville/Baltimore 1G

    Tons of 1g parts let me check the basement and shed to see what I have.
  21. 90turbotsi

    Where, How, What to Learn About Mechanics [Merged 4-9] rebuild work

    I learned from Forums, practice, and not being afraid to try and fix any problems that come up
  22. 90turbotsi

    Central Maryland DSMer looking for some help

    I will be willing to help you out I live in reistersown which is right next to you an I am down rt 140 often, let me knom whats up.
  23. 90turbotsi

    Spring DSM/EVO meet

    Hey guys... very interested in coming to the meet probably will be me in my gsx and my brother in his gst... were coming from a little north of baltimore so it should be a little over an hour and a halfJeremy
  24. 90turbotsi

    how and when did you get into the dsm scene

    Honestly my Dad bought his 90 talon tsi back in January of 90, I wasn't born till july of 90. His talon was the first car that I ever was driven in. As I got older around the age of ten my brother got his 90 tsi, and a few months later my other brother got a 91 tsi. From about the age of 11 I...
  25. 90turbotsi

    1g AWD-possible electrical issues car not working

    I just swapped the ECU with another 1990 AWD ECUthat we had from another dsm. Still no change except when I crank the CEL turns on for a few seconds and then will turn off by the time I stop cranking. When I had previously checked the alternator with the voltchecker it was reading between 13...
  26. 90turbotsi

    1g AWD-possible electrical issues car not working

    Yes I mean the car cranks but won't fire. The other dash lights will turn on but again the CEL is not on. Is a DMM a volt tester? If so I have one of those.
  27. 90turbotsi

    1g AWD-possible electrical issues car not working

    Update: I got a replacement battery today. I put it in and the car still won't turn over.Steve-when the key is turned and I am not cranking the boost gauge does go to zero. It returns to zero when I stop cranking. The whole time I have been dealing with this I have not had a CEL go on...
  28. 90turbotsi

    1g AWD-possible electrical issues car not working

    I pulled the ECU and checked it. Nothing is leaking and there is no fishy smell. It is a relatively newly rebuilt eprom so I can rule out the ECU.
  29. 90turbotsi

    1g AWD-possible electrical issues car not working

    I will do this but the batteries die when I leave the car sitting for a while without doing anything to the car. A battery issue would not explain why the car turns off when running and cranks nonstop without turning back on though.
  30. 90turbotsi

    1g AWD-possible electrical issues car not working

    My 1g AWD has been having some issues which has left it immobile for a few months now until finding the time to fix it. The start: A few months ago I went to drive it home from a football game. When I turned out of the parking lot it turned off and would not turn back on. When I popped the...
  31. 90turbotsi

    Varying Clutch Engagement [Merged 1-9] bleeding air floor stuck grinding

    turns out i broke one of the arms on the fork off.. :( .. half way done now pulled the tranny just to put it back in, gotta go it though
  32. 90turbotsi

    Varying Clutch Engagement [Merged 1-9] bleeding air floor stuck grinding

    So last night i was driving home in my 2g gsx 6 blot swap, and when i clutched in my clutch pedal made a loud popping sound then fell to the floor. I pulled it back off the floor with my foot and it like half pumped back up. The car still will go into gear and shifts without grinding, but the...
  33. 90turbotsi

    Opinion before I pull the trans in the -30 temps

    Nope, unfortunately...was hoping it was
  34. 90turbotsi

    Opinion before I pull the trans in the -30 temps

    yea the fork is moving...checked that as soon as I checked the master and slave cylinders. Even when you pump the clutch a bunch of times to build up additional pressure you still cant get it into gear when the cars on.Its not the slave or master at this point i can conclude that
  35. 90turbotsi

    Opinion before I pull the trans in the -30 temps

    Ok so heres the story... the cars a 90 AWD been in the family since the day it was new back in 1990. Over the years its been kept up, I rebuilt the engine and put in a JDM trans (which had been cleaned up by my mitsubishi mechanic friend (about 40-50k ago.So the other day the shifting...
  36. 90turbotsi

    youngest DSMer?

    I got my first GSX around my 15th birthday and did a full 6 bolt swap with my brother before i got my liscense now i am 17 and i couldn't think of driving anything else. I was raised thinking DSM with my dad buying his first in february of 90, now our driveway is full of them and it is an...
  37. 90turbotsi

    DSM link misfire trouble

    Yea a check engine light shows up the instant it beings misfiring, its very selective sometimes i have no troubles with it, and other times it happens every two or so minutes.
  38. 90turbotsi

    DSM link misfire trouble

    I have a 96 gsx with a recently done 6 bolt swap, the car was expectedly misfiring in the beginning without link, but not very often. Now that i put link in my car it seemed to be running better than all of a sudden after driving the car for about 15 minutes it pulls a check engine light and...
  39. 90turbotsi

    Help deciding on choosing a front bumper

    Being that you really won't be able to find the 2gb talon bumper as you had stated I say go with your custom front bumper. I saw a picture a while back of a 2ga talon with a cut 2gb front bumper and I loved the way it looked. I think the large opening filled with a huge FMIC will look...
  40. 90turbotsi

    Cleanest DSMS...

    Yea so I don't think that those links above work so try these instead... http://inlinethumb29.webshots.com/64...600x600Q85.jpg http://inlinethumb59.webshots.com/73...600x600Q85.jpg http://inlinethumb13.webshots.com/41...600x600Q85.jpg http://inlinethumb55.webshots.com/62...600x600Q85.jpg...
  41. 90turbotsi

    Ring Orientation (OEM Book -vs- OEM Instructions)

    I was installing new OEM Mitsubishi rings on a set of 2G pistons and I noticed that the OEM service manual has a different diagram then the instructions included with the OEM rings. I have included 2 pics below of each of the diagrams. Let me know what you think of this and which I should go...
  42. 90turbotsi

    Maryland DSMers Unite!

    I would definitely be down so long as I'm not tied up with exams or work around that time. This was my second year going to GMU and as with the rest of you was very dissapointed with the DSM turnout compared to last year. I currently live in College Park as it is where I go to school but only...
  43. 90turbotsi

    Help me decide which Rota Grid

    wow, this is from over a year ago ROFLI have rota grids and they've been on the car for about a year. 16x7 in +40, perfect fit. I also have rotas on my 2G in 17x7.5 in +45 they fit fine as well.Theres a lot more out now for 5x114.3 which helps for people interested now
  44. 90turbotsi

    Team Trinity GMU 2007 meet

    It is possible that I may be coming from College Park this year but there is a chance that my brothers may be bringing their cars (all DSMs) and if that is the case then we will probably wind up caravaning with you. I'll keep you informed either way.
  45. 90turbotsi

    Porting the oil relief hole with no balance shafts?

    Just a bit of FYI the diagonal cut pump gear/driven gear are the updated/redesigned gears used. Yes they are better and "less noisy" from what ive been told.
  46. 90turbotsi

    Tan 1g's.......Wheel Color??????

    Shit man it turns out that for some reason all of my gallery pictures are gone. I'll get some pics for you.
  47. 90turbotsi

    Tan 1g's.......Wheel Color??????

    Check out my gallery I have a bunch of pictures with my new rims on. I vote go dark but what can I say...I'm biased.
  48. 90turbotsi

    very loud knock please help so worried

    Heres the car and the sound:<embed width="430" height="355" type="application/x-shockwave-flash" wmode="transparent" src="http://s9.photobucket.com/player.swf?file=http://vid9.photobucket.com/albums/a72/TalontedTSi/DSCN2893.flv"></embed>Not the greatest quality and it was really...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top