Just got my first auto dsm and it has a broken flexplate. I pulled the trans and ordered a kiggly flexplate. It is installed according to the kiggly website.(no spacer on the crank side and one on the outside facing trans) Also the lifted center of the flexplate is facing the trans.The...

I was wondering if there is anyone out there running a holset hx40 with a t3 vband Bullseye Power .70 ar housing with a turbonetics t3 manifold..I have heard there are fitment issues and the turbo will hit the block.Can someone confirm that it will or wont work?

Hey guys! I have a new talon and have been building it into a drag car for the last few months. My goals are to build a mid to low 10 second, STOCK 6 bolt, T4 60-1 car. With the car weighing only around 2600lbs with me in it. The car is going to be show quality, every little detail of the car...

Im looking for help and PICS of a properly installed and NHRA legal fuel cell... Ive seen numerous post and pics of fuel cell just bolted to the floor with no firewall... (Ive seen this on that blue talon with the rx7 wheels and hoosiers that is in the 9s) i dont know his name.. is that ok to...

Ok so at first my car was smoking alittle bit and was not running to its full potential. I pulled the head off and the gasket was blown but not that bad. So i ordered a new head gasket, Arp head studs, and had the head rebuilt... I put everything back together and it smokes MORE then it did...

all of the sudden my car started smoking from the manifold and exhaust very badlyso i took the manifold off and there is oil all in the turbo housing, and in the top of the exhaust manifold and in one runner of the manifold...i also checked for shaft play in the turbo and there was none...

i need to find out what lines and fitting i need for the oil return line.... i orderd an ss oil return line from extreme psi, and it dose not fit!, the fittings hit the motor mount not allowing me to put it on, it is like directly above the motor mount and im stumped on what to do...

they stopped making 225/50/16 and i already have 3, i just need one more i cant find one even used anywheredose anyone know someone who has or can get one, or even 2i really need to find onehelp me out thanks jason

yea so i was doin donuts and then was driving the car normal and it was chattering comming from the tranny so i jacked it up and it looks like on the bottom like a line of cracks but the trans dose not slip, and drives just fine???????? im thinkin a flywheel bolt came loose and cracked it the...

ok so this question is for all them low 12 and 11 second 14B guys....What injectors are you guys running???i kno a few of you have stock injectors. i went 12.3 @ 112 on stock injectors with no fuel control,should i stick with the 450s or get some 550s???thanks.. Jason

i put my 90 motor in my 91, and swapped in a 91 coil pack, transistor, throttlebody, and cas.. and i am still using my 90 ecu, and i did 2 pin swap.....so my question is.... how do i make my tach work?

im putting my 90 ecu in my 91 talon what wires do i need to change, and what sensors do i need to do this? i know it was on vfaq but i couldn't find it.. so any help would be apprecited.. thanks

i have a 90 awd tranny that is beat and i have a 92 awd tranny that is rebuilt but has a big hole in the bell housing. can i just swap the good bell housing to the good tranny??? and will it fit, do they just unbolt and bolt up, or is it alot more complicated then that? i have no idea so...