I did this in my 93 1.8. I had a donor car and removed everything Wire harness, ecu, gauges, etc and dropped it in. Seemed to be easier to just get a new donor car and pull everything out then piecing it together. Motor mounts were the same and I believe the tranny is the same and the fuel pump...

Update! The ECU I had rebuilt was still bad.... I bought a new one and the cas issue went away and I have no lights. I can now hear my pump, injectors are working and I have spark!! It's still not starting though, I believe I'm not getting fuel up to the injectors. I feel like My fuel pump is...

I had to take a long break from this car due to major business expansions! Now that spring is coming again it's time to get her running. I'm still having this issue, The only code being thrown is 22. There was a code for 21 (coolant temp sensor but I fixed that) I've tried to reverse the cas and...

I'm having the same issue on the 91 motor as well. I replaced my ecu and Cas and I'm getting a code for the cas and I have no spark/fuel. I thought the Cas and Crank sensor where the same sensor on that vehicle?

I bought a 1990 laser and pulled everything from it and put it inside my 93 shell. so All the sensors, ecu, dash and wiring is from the 1990. The engine parts and ecu I order are for the 1990 as well. I keep my battery disconnected when I'm not working on it so the codes should clear every time...

I had the top pins reading power and ground and the bottom pins read 4.8 with the ignition on. Didn't try it while cranking, I will later today. Unfortunately the diagram you gave me is too blurry to read anything, I tried to print it but still was.And yes the tach is working it's hitting...

So I'm sorry if there is somthing like this on here but I did do some searching... I have a 1990 motor and it was running after I swapped it into my 93. We had a gas leak so we shut her down fixed the line that was leaking and tried to restart with no luck. After a bit of Troubleshooting my...

It's gonna be from 10-4 reg cut of is 12:30. the Location has now changed it will be at Hooters, 1483 Pleasant Valley Rd Manchester, CT 06042. Best buy screwed us over as of Yesterday.Show Classes: Import- (6) Honda/Acura Toyota/Lexus/Scion Mistu/Subaru Nissan/Infinity...

I'm wondering if there is a difference in between the interior fuse box's on a 1st gen? I did a motor swap from a 93 to a 90, since I didn't originally have the turbo and there is a wire difference on the Ecu, I swapped all the wiring. Everything worked great, Then since some of the tabs...

I felt the same way many times during my build, But i justt kept pluging away at it took about 3.5 years

oops, Aug 16th rain date is the 23rd and yes Manchester, Ct

Best Buy in Manchester is holding their first annual car show and sound off. Featuring Dark image car club and Team Act Audio. There will many show class's Including two best of show's and a sound off with modified rules. instead of normal Spl rules we will be determining class's based on your...

MAybe your heater core is plugged.

Anyone have any feed back or opinions about .::THE NEW XXTUNING BROUGHT TO YOU BY ETERNAL MOTORSPORTS::. thanks I need somewhere to tune mine when I'm done.

I use to go to autozone and get their alternators but i had to change them every year, at least they had a lifetime warranty.

Kind of a stretch but if you ran your new wires under the clutch you could be grounding out your battery every time you push in the clutch. Thus causing it to die.

When dealing with head bolts there is a specific order that use must use to extract or install the bolts. as for the problem with not getting them out., how big of a ratchet are you using? Sometimes you need to just use a little bit of leverage, ie. a breaker bar or a wrench to pull on the...

Taking The dash off isn't too bad, but definitely not a quick job. I've done it a few times now so I could be of assistance if needed.

If your car is a manual hook up the black/white; neutral safety input to the Emergency brake. This Will only reduce your chances of damage, not just external but internal as the starter, flywheel or others can be damaged if it is left in gear. If it's a concern you could upgrade to the 5701 or...

where are you getting the alternators from. Also do you have a system in the car and how big?

I had this problem twice! 1st time; I believe there was a loose cell in my battery once that shorted out the car every so often. Car would just randomly die, Would get a jump and be fine for a few days. I replaced the battery and never had the problem again 2nd time; Just bought eclipse and the...

Thats a good website, Thanks! I'm not new to the Dsm but I am new to the Turbo and the Turbo 101 really clarified things. Awesome

Anyone else noticed that in the ad the car is listed as a 92 but the car pictured in a 91?this is probally an early production 92, mid 92 they changed the body style

What did you do to replace the stud, I was thinking about cutting it odd drilling it out and using a nut and bolt combo. Any better ways:dsm:

I"m down for the petition. I have a 4g37 and having been planing on doing a swap. I recently read an article that might get your attention. I'm thinking about trying this myself and if all else fail.... it's swap time!! http://www.cincinnatistreetracing.com/community/index.php?act=ST&f=40&t=4176

I'm pretty new to the Ct area Myself. Just moved to MAnchester, Currently building a 1st gen That i've owned for 8 years. Feel free to Im me jimmy03440

You can lower the latch, on the inside, where the hatch connects. It's a simple bolt you lossen then adjust to where you want it! :dsm:

I have a flowmaster and i absolutly love it. I think it sounds better then some 800 dollar exhausts i've heard