What things do I have to change in this car to make it more reliable. I have a 92 talon TSi AWD (6 bolt):thumb: .

I was wondering if it would be possible to install 2 stock 4g63 intercoolers instead of buying a frontmount. THANX

Here is a list of all the shops in ontario http://ca.dsm.org/shopping.html (scroll down). Visit http://ca.dsm.org there is a great forum there also.

This might help: http://www.ecanfix.com/~mdhamilton/autotomanual.html

This only occurs in 4th or 5th gear. When I floor it the rpm's strart to jump from 4500 to 6500 back to 5000 and slowly continues to accelerate. Both my boost gauges (stock and aftermarket) are reading full boost(11psi). Could it be my clutch or is my tranny toast. First 3 gears are fine. They...

I have a spare low KM AWD tranny and a FWD in need of a rebuild(3rd grinds). Can I just swap all the AWD gears into the FWD tranny? THANX

I would recommend the evoIII turbo, then the fuel mods and after that the FMIC.

The owner is sure that it's .025 over. He baught it from a guy in montreal who builds high power talons. I asked him why it was .025 over he said he baught it that way then purchased and installed the pistons. If infact it is .025 over will it lead to premature engine wear??

I'm going to pick up the car soon, does anyone know the answer? Will it reduce my compression if the pistons are .020 over and the cylinder walls are .025 over?

Why won't the FWD tranny work in the AWD? I don't want to make it AWD, I want it to be FWD.

I took the cars to the mechanic and after playing with them for a week he tells me that he can't swap the engines for 2 reasons. 1.The 91 is an AWD and has a right and left center member, while the 90 a FWD only has a center member. 2.Almost everything is in a different place and that he can't...

No there is NOTHING in the 91, just the motor mounts and the harness and a couple of other things like the brake resevoir, clutch resevoir, and some fuse boxes thats it.

NO, the body of the 90 is damaged so I baught the 91 to put the engine into it. If I have to I'll buy an AWD tranny but it'll still going to converted into FWD.

I have a 1990 Talon Tsi FWD engine that I wanted to put in a 91 TSi AWD. The mechanic shop that I took it to says that nothing is the same. WTF are they talking about? Isn't everything the same except the tranny? He says that he can't complete the job. Can someone please shed some light on this...

Tomorrow I'm putting my 90 engine into a 91. Everything from the 90 is going into the 91 except the engine harness. Can I just swap the engine and connect the computer to the 91 Or do I have to change the harness as well? The 91 was a TSi AWD and the 90 is a TSI FWD. I did search and came up...

If you're getting anything bigger than a 16g than the external would be best.

We installed a new tranny into my car yesterday and now the clutch is always engaged. I mean when the car was still off the ground the tires would spin slowly as if the cutch was being slipped in slowly and would ,make a tak tak tak sound. When I would press the clutch in all the way the sound...

I could only find .020 and .040. The reason for asking is, I'm buying an engine from someone who clams that the engine is bored .025 over with 95 pistons.

I'm buying an engine this sunday from a guy who claims he has 95 pistons in a 1g engine. He says the compression is 150 across. Shouldn't it be higher than that. It's spose to have around 3000km on it. THANX

Bigger intercooler is required for sure. but we need a little more information to answer that question. What kind of numbers are you planning on running?

Thats a picture of the magnus motorsports car. It doesn't have one but it's what gave me the idea. I was thinking of using the q-tec y pipe. Put the cut-out on the red arrow area using the flange that comes with it. And buying a flange from RRE, welding onto the black arrow area and just bolt...

I have a question for you guys. Would a 3" electric cut out set up on a 14b like the one in the picture have alot of boost creep even if the waste gate and the turbo(exhaust side) are ported, boost set at 17-18 psi using a "fast acting" boost controler...

I say get the OBD-II. You pay a little extra but it will pay for it's self the next time you have the check engine light come on. Also you can monitor everything else on the car any time you want.:thumb:

I talk to a guy who builds engines about rebuilding my block. I told him that I wanted 8.5:1 CR, a .020 bore; he asked me what kind of boost I'm planning on running and I told him 17-18 psi with a 14b. He says that it's too much boost for that CR and that I would have to use race gas. Where I...

I put my car in an underground garage for a month then when I went back to take the car out for a ride the brake fluid was empty. Has this happened to anyone else? Also when I first baught my car it had been stored for a period of 2 months and when I went to pick it up there was no clutch fluid...

If you're going to do the labour yourself then this is a great place to buy a rebuild kit. http://www.eagleautomotivewarehouse.com/Imports/Mitsubishi/4G63_Prices.htm

http://www.roadraceengineering.com/eclfuel.htm go to the midle of the page

I'm going to buy an engine with 196 000km on it and was wondering if it would be ok to just put in the 95 pistons without replacing anything else while the engine is out. I'm not planning on running any more than 18psi. Will the engine hold up or do I need a full rebuild with that many KM's. The...

I just got an awd tranny converted to fwd and was wondering if I can use the equal length axleshafts? THANX

NO the tranny is a used 1990 n/t talon tranny going into my car.

My car is a 1g does that matter?

A rebuilt will cost me $1500 and a used non turbo tranny will cost me $350. My tranny grinds like hell every time I put it into third gear, second gear syncro is on it's last leg, and can't shift into 4th at around 6500rpm. Is everything the same in the non turbo tranny(ratio's and what not)...

I beat a Type R completly stock with 180 000km on the car. He had intake, exhaust and headers. You'll beat him from a roll for sure but if you race from a stop make sure you don't spin them tires too much cause he wont(low torque). Thats what happened to me when we raced for the 3rd time from a...

I called this used japanese parts place yesterday asking for a FWD TSi tranny. He told me it's very hard to fing one but he had a n/t tranny that would work if I used my own clutch. He also said alot of ppl do this. My question is, would the n/t tranny be able to hold 350hp(crank) or will it...

Where in toronto did you purchace the tool, I need one.

You have to have the jdm computer in order for it to work properly.

Maybe only that valve was floating.......

I asked this question a while back http://www.dsmtuners.com/forums/showthread.php?s=&threadid=73202

My friend used nail polish remover to remove his tints and he said it was perty easy.

The car sounds like a good buy. See if he'll come down to like $1800. If your are planning on rebuilding the tranny then get it if not don't. Cause my car did that when I first baught the car(popped out of gear) now the third gear synchro is gone. The 14b is the stock turbo and if he boosted it...

I found out where that black wire goes but it still turns off as soon as you take the booster cable off of the other cars battery. Also when the car is on the alternator make a squeeling noise. Have anothere question though, is the second wire that connects to the alternator(the one with the...

I took out the old alternator last week because it was not working. Well yesterday I installed a rebuilt one, and now don't know where one of the wires go. It's a black one thats coming from the black connector that connects to the alternator. We then jump started the car with that wire unhooked...

Just go watch the movie man, it'll explain alot of things. My girlfriend wasn't even a fan but after seeing that movie it changed her mind.

How old are you??? 14-15?? Do you not get the point of him rapping about the ghetto and showing the rest of the country that these things exist, so instead of going into other countries with the excuse of trying to fix them, they would spend those billions to help the people in those situation...

Didn't you read what he said you $%&* head, he wanted people to see that those things exist so the people would stop it.

Dodge intrepid? Canyou post a picture of the car you took the bumper off of or the make model and year. THANX