How would this fair with the PTT Twin Disc? I just picked one up and waiting for it to come in. Also waiting for my Isuzu slave cylinder and them Im ready to go!Dan

Hey guys! Just need to see some pics of your modified Isuzu slave cylinders for the PTT Twin Disc. I just got a new one and just need to see what to modify.Thanks a bunch! Dan :hellyeah:

Hey guys, Something weird has been happening to my car lately. Well, here it goes! In first, second, and fourth gear, if i floor it, a yellow light comes on. It is located directly under my tachometer and its the 3rd one. Its kind of scarry. Plus, when i floor it, it feels as if i have no...

Ok, I have a FP Green with a 38mm wastegate dumped off the 02 housing. I also have a Hallman in cockpit boost controller, the newest one with the ceramic ball. Its hooked up so that it goes to the blow off valve and also to the intake manifold. My Wastegate has a 1 bar spring. My question is...

I dont really get tired of mine. Its fun driving a 400+awhp car everyday. But Its getting stored away and the bottom end is gonna be built and so is the tranny. Im gonna get a new daily driver, dont know what yet. But its either an 03 cobra or 02 z06...

Very very very nice! I would pay about 12-13k for it. In that condition and miles. :thumb:

Is your fuel pressure fine? Also check your tune on the low end. That could help saving gas milage.

Heres the thing. YOU DONT STREET RACE IN THE MIDDLE OF TOWN IN DAYLIGHT. I race out in my area, that is somewhat deserted. We go to service roads, or on the highway thats right next to the spot at 2-3 AM. Other than that, I would race from a roll in day light ONLY if I was on the highway. Which...

Ok, this goes out to the people who dont street race. Whats the point of owning a DSM? Huh? If people dont street race, why dont we all buy toyota corollas? Huh? Audiouseclipse, how can you judge someone without even being there? What if they were on the highway, and there was barely ANY...

pics of the dj exhaust bullet style installed?

Im sorry to say this, but speaking like this, will NOT help you get customers. Not to mention, I ordered an inovate wideband a week before christmas and paid extra money for next day delivery, to get it before christmas. Its not almost 2 weeks after christmas, still no response to my emails...

Can it be installed without an msd ignition box, or do you need the whole setup.

Just wondering what I should tap into to get an rpm signal to my shift light, do I need a tach adapter or can I tap into an existing wire. Thanks in advance for the help.

The little 4G63t that could! :sosad: Makes me so proud! lolCongrats

Anyone know how to do this? I have a video that 11seconds long at 39mb!!! Thanks.

My last BOV was a HKS SSQV. My problem is not really the noise anymore, for now I actually broke it in and it makes some decent noise now. Not too loud, not too low. But what I am having problems with, and im not sure if it is it, but from 0-10 psi, its sounds as if its surging my turbo. The HKS...

Is it safe to run a 7psi spring on stock cams? Or should I go with the 9psi spring? 11 is way to hard for me. Thanks.

I just ordered the 7psi spring. Now, I know I need an allen key to remove the top half. What do I need to do to remove the old spring and replace it with the new one? Thanks for the help.

I think i need a looser spring. It sounds like its not opening all the way like it should. It surges alot meaning the spring pressure is too tight/ high.

I just installed my brand new Tial 50mm BOV with an 11psi spring. A couple of things I noticed. 1 thing is the BOV makes barely any noise. I know its supposed to make a nice loud *BOP* type of noise. Im like wtf? It sounds like it does a mini compressor surge and then a little hiss. Also, my...

16 year olds smoking? What is this world comming to? Next thing you know, your going to have newborns making their own cigarettes.

Lemme guess, the drift king drives a nice turbo RX7 while the upcomming hero and main character manages to beat him in drifting in his 2g 420a Eclipse? :nono:

LI is where its at! :thumb:

I wouldnt say this is the dumbest, but quite possibly, the best!I went to the local race spot on sunday, but sunday isnt race night. I went to 7-11 to get water from dying of thirst, and my moms house is an exit away. The race spot is off the parkway so all I had to do is make a u turn and...

Looks like 16" flat black rota slipstreams wrapped in some nice fat hoosiers! :thumb: Looking mean!

get a life. lock this thread please.

I wish I could, but mine is EPROM with a keydiver chip set for 780's......My old one was f*cked up and melted. Sorry bro, come over to NYCCDSM.com and post your problem there! we are all on long island.

Man, imagine sticking a big grind cam on that lol. Talk about LUMPY.

On a 3065, at 20psi on 93 pump, I made 311whp 297wtq. 43 knock counts, no wideband used. Thanks to turbo trix. 780cc's, keydiver stage 3 chip, safc2, pocketlogger.Going back soon with a new knock sensor, new place with wideband, and DSMLink.Hoping for high 300's at 21psi. Wish me...

I work at quiznos lol.

I was thinking of selling my 3065 in order to get a smaller BB turbo. I love the way how BB turbos spool and last. I wonder who else makes a turbo similar to it yet smaller?

Better pic up DSMLink, 780s, fpr... The 3065 is a serious turbo, and not to be taken lightly. 550's is not enough to fuel this turbo. Not to mention, youll only be able to run about 12 psi, and the thing I didnt really like about this turbo, is its full potential doesnt unlock really until 24...

Scratch that, its raining. :notgood:

Well Im going, who else is? I say we meet in the walgreens parking lot at around 10.

Its off of exit 39n on the southern state parkway. Just a place with straight roads and where every club/ricer meets and races. Last time I went I just flexed my muscle. Now im gunning for the big boys! :thumb: :tease:

Im going to be in the walgreens parking lot on DPA at 10pm. Hope to see some of you there!

And if what your doing is for ass, I feel bad for you. DSM's are bad as it is, we dont need some kid to by a decent dsm and so he decided to "teach" aka wear out your clutch and your wallet, just so you could tap that fat ass. :notgood:

How far east are you? We all usually meet in Oceanside/Rockville Center then cruise down to DPA. Should join us sometime.

Well, still stock motor. When I go to get retuned, im bringing it up to 22psi and hoping for high 300's. I still envy you! :thumb:

Very nice numbers! Im actually alittle pissed because when I got dyno tuned, they could only squeeze 311whp out of my 3065 at 20 psi. Going to get retuned then head down to the track and try to get a low 12 second timeslip. Then build the motor to unleash the full potential of this turbo and...

What do you mean newer version? And how could you possible manage to clamp it down? It needs the HKS flange in order to work.

Get some silicone couplers with tbolt clamps! :thumb:

Pretty funny you mention that. Keith said you werent going out at all because your car was fvcked.

Well I went to DPA on friday. Went udefeated againsts 2 srt-4s, an m3, a camaro, a gtp, and a STi. Then the next day i jumped timing after my crank pulley busted. All fixed and no damaged valves! :thumb:But everyone was a punnanny on saturday all because of keith. Hes a little drama queen...

The only compliment I ever get is for my car being fast and loud. Due to the 3065 and 40mm wastegate. Other then that, the only way my car gets a compliment is for the nose for the FMIC. Im just waiting for the pro kit and agx's, with rota slipstreams! :thumb:

I get off work around 9, so Ill be out by 10 to 10:30

Anybody comming out tonight? Im planning on working up my kill streak after murdering my cousins 350z from a roll! :thumb:

Im going Friday and Saturday to the ave.As far as the dyno tune is concern, Turbo Trix DID NOT use wideband on my tune, causing me such low numbers. Nor did they let me stand by my car.API is located in Yonkers, New York. So Im going to try them next to possible get a new number put up...

Im supposed to be getting 370-390. Im putting out maybe 370 to the crank right now.

I paid Turbo Trix to use the wideband, which they didnt... Causing me to have a seriously bad tune. Going to API to get it fixed sometime next week.I emailed Jeff about it and just waiting for a reply. But, I have the MAFT zeroed out. Its just there for the airflow.Im hoping to come back...