I was just wondering why some cars that i listen to which have the hks ssqv bov have a fluttering sound but some cars that i listen to dont. do any of you know why this is? thanks
Im looking for a good after market BOV for my 1G GSX.
I've read a lot of different post saying that the 1G BOV's leak during idle.
I was looking at the Greddy type RS and the HKS SSQV.
If you guys have any other suggestions as to what would be a good BOV then please let me know.
Also, on...
This 1g GSX im buying had a Buschur racing fmic but the guy sold it and put the stock inter cooler back on. How much psi of boost can I safely run with the stock inter cooler?
Im a newbie to the whole 4G63 motor b.c I previously had a 420a.
Well im translating for my boyfriend cuz he works offshore. :)
this car does idle but it idles rough.
the guy is giving me some brand new 660 cc injectors but the stock injectors are in the car right now. i talked the guy down to 2000 dollars so i dont think he is gonna go much lower than...
I have a question about a 1990 Mitsubishi Eclipse GSX that I'm thinking about buying. The guy that I'm buying it from says that the car won't idle right now. He says that an Apexi AFC will cure this. Is this true?Here are the mods for the car:
- T3T4 turbo
- 2G ported manifold
- External...
ahh you suck.
i'm from kentwood,La.i'm leaving for work tonight and i won't be back until feb 6th!
where are you from?
i'm always in baton rouge.
i've got a thread started for a meet-n-greet if anyone is up for it!
if not me and you should meetup when i getback.
i've got a few dsm's...
heres mine.its lowered with eibach sportline springs.can't remember how much it lowers it tho and it has 17's on it.
the back rubbed on bumps so i just got a sawzall and trimmed the fender wells!!
charles
i've heard a few a-bahn immortal setups.they were all tuned high as shit tho like 50hz+ so they sounded like shit for daily.what i have found with a-bahn subs is that they like ported boxes alot better than sealed boxes[from the 2 that ive played with]which are the aw1206's and the aw1200's.i've...
yea i know my passenger side low beam shines like 3 different small beams.i'm gonna try to adjust them tonight.i turned the screws a lil last night but i didn't see the beam move or anything .i'm gonna try again tonight whenever it gets dark.my projectors were $179 shipped.
like i said tho...
i have the same projectors except mine are black instead of chrome.
i had to fab up a wiring harness as well.another thing i didn't like was the way the low beams were aimed,and i can't seem to figure out how to adjust them."LeJeune123" do you know how to adjust the low beam of the projectors...
"lesb1978"its an arospeed strut bar.
i'm not real sure what all colors its offered in.my friend owed me $10 and gave me the strut bar instead,so i didn't complain about it.i have an aem bypass valve for the intake,but i only put it on in wet conditions.i'll get a pic with it on if you'd...
has anyone ever used or seen anyone using a venom 400 performance control module on a 420 A eclipse? i was just browsing through summit racing and i saw that they offered one for a 420 A eclipse and i was just wondering if it would be worth getting or not. thanks for any input.
what is the actual wattage of yalls silvania silverstar bulbs? where can i get the H1 and H3 silverstars at and what wattage do they come in? all the silverstar bulbs i seen dont exceed 70 watts like the seventy watt 9005 bulbs and the 60 watt 9006 bulbs. are there any higher wattage silverstar...
well im sorry-im writing for my boyfriend cuz he is offshore and he is translating over the phone. excuse me for not getting it exactly right. i guess i didnt hear him correctly. but thanks for the input.
I have a 96 n/t gs. I already have greddy st exhaust but its old and its starting to rattle. My question is should I go back with the st2 or the evo 2 catback from Greddy? which one sounds better or do they sound the same? Is there a performance difference between the two or is it just a...
anybody know of i nice set of fog lights or driving lights?
they had a crapload of them at wal-mart but i didn't know how good they were.
anyone know of some good ones that aren't very expensive?
thanks guys...
charles
this is the last day guys.i'm buying a set tomorrow and i've narrowed it down to these 2 sets.
set 1set 2
please help guys....thanks in advance!!!
charles
last night i cranked my car and it wouldn't rev above 4500-5000rpm under WOT,but it will at around 25%open throttle.
usually after a few min of driving this will clear up.i stopped at the car wash and killed my car.when i went tocrank the car it would go to start then die.it did this 5 times...
i'm ordering my project headlights tonight and i need to know which ones to get.
would you guys pick the 95-96bumper/headlight or the 97+bumper/headlight.
also would you pick::
black projectors and black euros
chrome euros and chrome euros
black...
i was just posting a pic of the car because i have never posted one of it yet.
i think the car has 2 fuel pumps.
my car use to be turbocharged but then we converted it back to stock after my sis's b/f slung a rod in the car.
it has a fused power wire leading to the fuel pump under the...
i have a 96 gs.
99% of the time my car won't start on the 1st try.i can turn it over for 10sec and it wont start,but i can turn the key off and back on and it'll start in the 1st few seconds.
this is aggrevating as hell.
does anybody know what could be causing this?
i would appreciate...
my cheap ebay one bent the other day so i'm getting a new aem cai.
which one should i get.
i'm getting either the aem cold air or the aem V2 cold air.
which one would work better?
the original is $212 and the V2 is $260.
this is at a local shop.
thanks guys.
charles
hey guys i have a 96 gs and the temp is running about 3/4 of the way on the temp gauge where it normally use to stay at 1/2.it only does this after it runs for about 20min or so.
i have changed the thermostat and flushed the radiator and checked the fans.everything is working properly.it will...
i have a 96 gs and its been raining hard for the past week cuz of the tropical storm.
well when it rains hard my headliner leaks its ass on the left and right sides by the doors and in front of where the sunroof is.
at 1st i thought it was just my sunroof leaking but now i'm stumped.
i...
i have a 96 gs 2.0.
i cranked my car this morning and when i was goin down the road when it got to 4000rpm it started sputtering and wouldn't go past.
it just started this, this morning.
could it just be a sprkplug or somthing.
i'm prob goin to the parts store to get some spark plugs for...
my car will be turbocharged in the next 2 mths,and i was just curious as to what kind of exhaust you guys are running.like from the turbo back.i am trying to get some ideas.
i have a greddy sp catback,but will prob be switching to the thermal research system.
charles
i was wandering what the differences were motor wise between a 95 and a 96+.
i know that the bedplate that holds the crank in has the lil notch that holds the rod bearing in place on the oppisite side.
what else is different?
thanks guys!!
charles
martyd03!!
i appreciate the time you took to write that out for me man.
it sounds alot more complicated then it actually is as i can tell.
i think i'ma just go ahead and pull the motor and be through with it.
i need to re-do my bottom end as well while i'm at it.and i guess i should go...
hey guys.
i have a 96 gs.i'm ixing to order my star stage 2 kit for the car.i was wandering whats a good bov that is loud.
i use to have a greddy type s bov from when my car was turbocharged before,and it wasn't quite loud enuff for me.
i love the way the bov's on the neon srt4's sound.
i...
i'm fixing to take the head off of my 96 gs 420a to get new valves/seals/etc.
whats the easiest way to take the head off??
we have the tranny out right now due to a bellhousing problem.
do i need to pull the motor back out,or can i just take it out as the engine sits in the car?
thanks...
sounds good guys.
i'll deff attend if its not too far away and if i'm off from work(ΘFFĦỒŖỄ).
my car will be turbocharged by the time the meet is hopefully.
if not i'll be all motor!!1) gsgoinfast (chris)
2) miamieclipse (mike)
3) Spooner dee...
yea we do need to get a meet together.
my car is down right now due to a hole in my bell housing :barf: .
it should be fixed in 2 weeks or so.ordering the bell housing and my spec stage 3 6 puck clutch next week.i may go ahead and get the aluminum flywheel as well.
looks like its gonna be...
i'll be ordering my new spec clutch next week!
i'm still deciding which one to get.
which one should i get guys::
spec stage 2
High clamp pressure plate, segmented chatter-free Kevlar disc, bearings and tool.
Torque Rating: 360 ft-lbs.
$375...