Hands down ECU. Had the exact same problem with my 1990. Just do it... :)

Ok, Long winded but hopefully you techs can help me narrow down my problem,On a hot day, I was zooming around going WOT a couple times around town. Then all of a sudden I have a wierd throttle issue. When I shift above 3 or 4 thousand, i get a rasie in the throttle. So im going from 2nd to...

Looking to buy some. If you have some please let me know... Ben

I bought the kit. Had somebody install them when I had a bunch of other stuff done....They are dim as hell......any idea why? Its nice that I can put h4 bulbs in but the regular and brights are way dim....Hard driving at night!Any ideas? Is my ground wire not big enough? Power wire not...

I bought a shep trans. Its awesome. But I now have a cracked trans beacause of my mounting. (Dont ever start with me my As-s is very sore)-Here are some picturesI took off the flywheel for kicks today I wanted to send you these pics to see if you could tell what the throw-out bearing...

I am working on getting my transmission back into my Laser (fwd). I know that there are 3 bolts that go in and then one in the back under the starter. Does anyone know the sizes of these bolts? I have heard 12mm and 14mm but are they all the same length. I tried screwing the bolts in and the...

Heres the other thing, thoose boots now are torn to shit.............Something I should replace? I will try mouting back on the shock towers and then prying in a downward motion. I needed to get the tranny out quick so i jsut flopped the half shafts and ran it over to a really good shop by me...

I rented the ball joint remover and the tie rid remover from auto zone. I am trying to remove the tie rods from the hub assymb up front. I am putting a new trans in....... I also have to replace the power steering rack too. The fork tool is not working out for me. Is that possibly becasue my...

90 Laser, fwd, 120,000 original tranny -Driving down the express was and experianced a "lock out" when i tried dropping to 4th gear to pass a car. I then pressed the clutch down as hard and far as I could and tried to get into any of the gears, it finnally let me slam in into 4. Came up to toll...

Bronze Rims on a black car! Hot!! -Black 1g Represent!

If you have the time, money, and resources...GO FOR IT! I'm a 1g too so I gotta give you support on this man. Its probably going to cost a ton of money and time but would look sweet. I am more for either the Gull wing door style or what I really want is Sucide doors. (When they open backwards!)...

5 Gallons of Gas and Match? Not too familair with with 2gs but I had a similar problem. It ended up being a combo of the Cam angle sensor and the cam shafts i had were slightly bent? worn? Anyways, thoose three things got replaced and i was fine. So much for spending 1000 on ecu and other...

Dang, I love skylines too :(

Does any body know what company makes these? Is it a custom auto body shop thing?

Jacking a second, What are some good Brands/Places to go with for us 1ga guys? -Ben

I love the people on here that say "Choose what you want" and then rape you if you add a wing they dont like, or a front or rear bumper.......Anyways, With a red car like that I think that any kind of silver or chrome would look great. What kind of tires were u thinking of? -Ben

So sad to think that cars like his are the ones girls lay all over. Us Stock or nothing guys jsut sit in the back of the parking lot saying "That looks ###" Give the guy some slack. I put the biggest wing on my 1g and learned my own lesson. It was a rather nice park bench for the ladies though...

I paid about $800 for a brand new set up. Ebaich Springs and AGX Adjustable Shocks. My brother went with the Ky-b's. I understand they are the same shock but NOT adjsutable like the AGX's. Well let me tell you, his ride now looks getto becasue it brought the car so far down and the ride quality...

Looking for a Body kit for a 1ga laser. I wanted wings west. They do not sell anything that will fit. Is there any kits out there that people have had good experiance with? I really like the style of drift kits........ Thanks Ben

See you at hooters............... I'll be there -Ben

Count me in! My dsm is done and ready to meet with some others! -Ben

I went with agx's and the ebiach prokit. I also have a front and rear strut bar. All I can say is WOW!!! What a difference! I was told the agx's might be a little rough but I just made a 300 mile trip and loved the set-up the whole time. -Ben

Looks nice. What mods do you have planned for it? I wish I could find a 1g awd turbo for that cheap! :thumb:

not an expert but i thought i heard something along the lines of the turbo siezing up?? WTF -Ben

I can only find a front camber kit for the fwd 1G dsms. Any help? Thanks Ben

Why did you guys go with sportlines instead of the pro kit? -Ben

You will lose internall support bu installing an sunroof that did not come from the factory. I wanted to do this and the mechanic convinced me not to bother. With the floor bar and strut bars I have I dont wanna to lose any straightness.......... -Ben

Ah, What about carbon fiber bottles? We have carbon wrapped bottles at the fire dept and they take in 4500 and out full pressure...then to a regulater system and into the air mask. They are small. About the size of a 10 pounder..... So is it fair to say the MORE psi you get into the bottle, the...

What is "LSD"? I think I may just get the springs now. Thoose shocks are pricy! -Ben

In all my days of posting I have never seen somebody make the first letter of every word in CAPS. Are you on acid? White rims rock. Look nice on almost any kind of car. -Ben :laser:

Jim, You are sweeter then my taters! :sneaky: -Thanks for all the help -ben

Anybody?

MU hahahah! Thats priceless! :tease:

dont see anything................................... :spam: (Just had to use the new icon!)

I am pretty sure I am going to go with koni yellows in the front and agx's in the rear. I am going to use ebiach pro springs. I wanted skunk 2 springs but they do not make them for my car. What other set-ups do you guys have on your fwd??? I am going for lowering and MOSTLY TRACTION! Now that I...

I figure an average macco paints 8 cars a day. A full body shop MIGHT do 2, and even if they do they only do parts, NOT whole cars. Macco would be as large as they are if it was shi t work......I am still 50/50 on the subject.........So far it looks like the people that say it sucks have very...

Thats why you drive a galant. :eek: -Ben

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7960425174&category=66483&sspagename=WDVWThey are 17'' and have a 5x114.3 bolt pattern. Will they fit my 1990 Laser? Thanks Ben

I still say the first car i made needs to be reproduced full size. A 1987 Cadillac Deville. Dam. Talk about a BOAT. I was a pimp man

Hey luke, man that SUCKS! Dont blame me jsut becasue im your nieghboor though. :)I will #### this people up when we find out who. I bet its the kid that stole Stu's drive shaft out of his S-10. -Ben

Easy, Sheps DSM............

good luck man

Jacking the thread for a sec, At what pressure does Nitrous become unusable and need to get filled again? -Thanks Ben

I was able to get the NX Mainlin EFI Kit shipped to my house for $337.00 www.streetdemand.com -I spent about $300 in gauges. I have a 1g N/T stock internal engine. I Have an intake and a full exhaust. While I have not installed the Kit yet It seems put together VERY well. I bought an oil temp...

Dont know if it helps any but I have one for a Dsm 1g -Ben

Same answers im sure but BUMP this. I am looking to do the same thing..... -Depends on shop -Slip Painter some extra money -Its all in the prep work. Any monkey can spray the gun.

If your not looking for a big hole i guess sony would be ok for you. I went with........... 2 Rockford 6X9's 2 Rockford 6.5's 2 Infinit Kappa's (the tweeters) Then the Punch stage 3 subs with a new kenwood 1500 amp. It rocks. The speakers without the subs though give high quality and volume...

Where could i pick up raw colored LEDS like that? Thanks Ben

Ye Haw! Im ready to roll as of this weekend....... Whats up with the csd street racing? Wheres the location on that? -Ben