Okay, folks, for some unknown reason, we're now getting three threads a week started about clutch malfunctions.
The usual cause is that the system hasn't been properly bled.Have at it.I put in a used, but in good condition master cylinder, to replace the one I had before with a broken...
sold mine with stock exh. mani and o2 housing for 350 + shipping on ebay. This was about 2 yrs ago. Just throw honda in the title, and somewhere in the listing say this would be a custom application, and you're set.
-Mike
hello. Just got out of the garage, I did what you said step by step and that was a perfect explanation. thank you very much for your help. Creating a tech article on window replacement would not be a bad idea for a 2g :) it was a lot easier with the moldings/stabilizers/sideview mirror...
one more thing. sorry. when you said take out the stabilizers, I see two kind of U shape metal bars with 2 bolts in them, one closer to the hinges, one closer to the farther end of the door. Are those two U shape bars the only things I need to remove, or do I need to take out the...
is the removal of the sideview mirror necessary? when does not having that help the window fit?when you say remove the trim, there is trim on both the inside and outside of the glass. do both come out?Thanks for your detailed description and help.Mike
Went out there and tried today, before checking back to see if anyone had replied. After an hour and a half I gave up for the day and I will return tomorrow. I tried to leave some of the brackets on the window but it just wouldnt fit down into the small opening, and I saw what a bi*** it...
Hi, I am replacing my passenger side window. Got one from the junkyard for pretty cheap, got it cleaned up, ready to put it in. Noticed it has the brackets and washers are on it already. Was wondering should I leave them on, and peel off the black trim to fit it down, or remove all that...
I've heard this in a few of my business classes.... but if you were to put 150 from each paycheck (bi-weekly) into an interest bearing account (around 6% rate) like an IRA, after 30 years you will have over 1 million dollars saved up. Not bad eh?
thank you very much for the replies. hooked you up with some positive feedback rick. defiant, you have enough as it is :) I am still waiting for their phone call, but I will have them do the steps you recommended. Without changing the AC Compressor, and having them replace the harm bal. and...
I leant my buddy my car for a couple days.. and he was driving it back from work, when he said there was smoke coming from the engine and the car was running weird. he pulled over, and noticed some of the belts were tangled up and bits of it were shredding away. he drove just a bit up the...
congrats bro. I am REALLY glad to hear they got caught. Like half of the other DSMers on here, I have had my car broken into. There is no better feeling after that then for them to get caught. There is no one in this world that I hate more than people who steal other people's hard earned...
started two new jobs...
Superior Ambulance - EMT-B: 9.00 per hour (24 hr shifts), +4.00 per callPanasonic Representative - 14hrs p/w for the weekends. $18.00 per hour, sell and train on plasma & LCD TV's, among other things.
I have been using a STAR FMIC on my car for the past few months.. it is supporting my 16g at 20lbs, and 23 lbs on racegas, the intercooler has been definately doing its job. The piping is kind of weak at 2 1/4", however I e-mailed some vendors that are selling the kit and they claimed it is...
alright sorry for the delay in getting back to what happened with the interview..... well.... I got it! Yep, they sent me a letter early last week and it explained that I was one of the few selected members! I went to a luncheon last week to celebrate the new "dunham scholars", and...
I've got a question. I'll be up there tommorow.. and will bring another car or two with me, however they are not DSM's... grand prix and a TA... anyway.. are they allowed to park near me / us, or are they condemned to the dark section of the parking lot next to the rusty buicks and family cars...
a friend of mine recently purchased a mint condition 97 VR4 TT Hard top Convertible, just like the one in the picture. The crazy part is, he just turned 18 and pays for it all himself, working at circuit city in their roadshop while finishing high school. According to him, there were only...
I take it your run must have been on some sort of drag radial or slick.. Can you give some information on the tires you used? That is a great time for a FWD. Do you have any pictures of your car at the track? were you on race gas or pump gas?
whining like a little bi***? I don't think so. we all know you don't like the video. we found that out in the past 5 or 6 posts you made about it. However, you don't need to whore the entire thread saying how much you dislike my car and the video. Your points have been made, I know you're...
Kind of short notice huh? I'll be out there though.01. Karen
02. MR. Pinetree
03. Nois*E*Turbo
04. gsxtreme1987 (Laraib)
05. Slacker (Chris)
06. Boostinsidetsi
07.
08.
09.
put in the new plugs, and went to RRE's website. they had a similar car with almost the same setup I have, and they put their high/low afc settings, so I entered that into my car. here are the new AFC settings:Low Setting:
1K +-2 2K -4 3K -6 4K -10 5K -10 5.5K -10...
I've got a big 16g, FMIC, 550's, rest of the mods in profile. Took my car out for a ride today with my tunerstein logger and this is what I got:3RD GEAR PULL (Sorry I let off a little early)
RPM O2 TIMING TPS MPH
2736 .91 17 100 35
2904 .91 13 100 38
3392 .95 2...
I went in for the interview today. The committe they spoke of was just 3 people, which was kind of nice. The interview lasted half an hour and they asked me questions from current events, my history, and what I can offer the school, to information on the scholarship and where I see myself in...
I'm going into a university in a couple of days to interview with a committee which is chosing around 10 students to recieve a scholarship. The scholarship is a transfer scholarship for a full ride for two years (35,000) and I've already done a lot of the work (two essays, three letters of...
Yeaaaahhh... I almost believed him there... wait.. no I didn't. :notgood:Punkgothickid9 [8:32 AM]: hey
Zero260in6flat [8:32 AM]: hey
Punkgothickid9 [8:32 AM]: dude u have a sweet car
Zero260in6flat [8:32 AM]: thanks a lot
Punkgothickid9 [8:32 AM]: i have an eclipse GSX...
I put Tein S-Techs on the other day with KYB AGX Shocks. I must say, these springs are very nice. My 95 suspension must have been going because even on the hardest shock setting the ride is still a lot smoother. We went to an AMS meet last night and were cruising over 100mph on the highway on...
got the motor mounts in. this part is kind of funny.. i've read all these posts about tearing the rubber out and inserting the new mounts.. well I did that, for the front one at least, and then realized I shouldn't have.. got one for 50 bucks at autozone. Should have read a few posts back in...
I understand I want it to sweep upwards and what I'm looking for here is how do I know how low I want it to go when I hit full boost? I can take away or add fuel, right now its -13 across the board from what another member with a somewhat similar setup I have had his set at, but If I can go...
the title pretty much says it. Im going to do some pulls today and am not entirely sure what to look for in my timing. My mods are in my profile if anyone needs to check, but basically when i hit it in 3rd and max boost hits, how LOW do I want my timing to go? is the higher the number at this...
I just spoke with AJ (flybiyou) on the phone and he said he just recently did a boost leak test and there were no leaks found. Could the turbo itself be bad? any other ideas?
im running a 16g on my 2g talon and I have boost creep. I noticed when I bought the package the guy sold me a 1g o2 housing, which he said was ported but i havent ever disconnected it from the turbo to see if it is or not. anyway, would getting a 2g o2 housing and porting it out help me in...
now thomas, we all know you dont want to upgrade that without a ported manifold, ported o2 housing, FMIC, and something to stop your creep with that 3" exhaust :)
I just got some prothane motor mounts in the mail today. I have all four sides, and have heard how much of a PITA it is to do the rear. Will just doing the sides and the front be sufficient to prevent wheel hop for me? The main reason I am doing this is traction.. and if i can get out of...
I disconnected the connection from the wall when I gave up for the day.. walked out to the garage later to take out the garbage and somehow the light on the charger turned on and the car had some juice. Weird, but hey, it works :) thanks for your help guys. Gave you positive reputation points...
spades keep your shit talk to yourself. you comment on my car, when all you have in yours is some intercooler pipes and a blow off valve for the most part. My interior is riced out? all ive heard from people that have seen it in person are good things. And if you want to talk crap to me, we...
Brother Ali - Room with a view
Atmosphere - sevens travels albumhip hop music. either you love it or hate it. let me know whoever downloads it what you think.