Ok,heres the problemRecently the bolts connecting the bell housing to the block came loose..Making it hard to put into gear and it was grinding into the gears. I tigtened them up and all was fine..until yesterday, when I realized this was happening again. I looked uder the hood and...
I would block it off if I had the proper tools and stuff to do it with but right now I am at school so those tools are 200 miles away. So can I just plug the EGR valve until I make a plate?
When removing the emissions vacume lines can you just plug the nipples on the EGR valve instead of using a blockoff plate. I have heard of people leaving it on there without pluging it but I figure that if the nipples are unplugged. That could be another place to "leak" from.
This is happeneing to my car also, but i also get a lot of vibration.. If you are having the same problems chances are it could be that the balance shaft is not sitting correctly. Try looking at that
I got the same prob. I have my MBC set at 14psi. When i get on the gas it will hit 14 then drop down to 9-10psi and hold there. It is worst in 1st and 2nd gear. Takes a little longer to drop in 3-5 gears!! I think its a boost leak but I haven't tested it yet. I have heard it's ad to hook a...
OK, well I set the boost on my MBC at 14 lbs. "tested in 3rd gear". So when i go to get on the gas the boost will go up to 14 then drop down to about 10-11 psi and hold there. What is the problem. Am i leaking boost from the BOV. I had my manifold heat cracks welded. Need HELP!
I ended up taking it to the shop that did the work and they told me the timing was off by one tooth. So I got the car back now after they reset the timing and its got the power back for the most part, but its loud as hell and the engine vibrates like a MotherF&$#$. I think they ####ed up the...
I have looked under the hood and listened for any ecaping air. I havn't heard anything out of the ordinary. The feeling the engine give when driving does not resemble that of a boost leak. However, I have never experienced a slipped timing before either so I dont know if it that. I looked at...
I have a 90 GSX and I am having the same problem. Everytime I open the door and start the car my lights and horn start going off....for like 5-10 mins. It's horrable. I ended up pulling the fuse to the horn because I could find no way to stop it and no one knows how to fix it. I end up...
I recently brought my car to a shop for some fixes.....It got a new rack ad pinion, head gasket, valve cover gasket, oil pan gasket, timing belt, alternator, control arms. Befire it went into the shop my car had oil leaks and such but its power was great. After the car came out of the shop it...