Lets keep this thread going Im having the same problem. I just installed a newly rebuilt transmission and supposedly new transfer case. Upon deceleration I get an awful clanging sound like ball bearings or similar. Im almost positive that its coming from the front of the car (and not the...
One thing I've read over and over is NOT to just buy a clutch disk and reuse the PP... not sure how accurate that is, but I suppose it opens the door for problems.
I don't know exactly how many miles are on this ACT2600 clutch and PP; I think it's roughly 20k miles. I just want to know what you all think about reusing it?I've gotten a TRE transmission, resurfaced the flywheel (proper step) and I'm wondered if I need to buy a new ACT2600?Notice the...
Well, I just got off of the phone with Shep and it looks like it will cost me:-rebuild $945
-'90 tranny extra $350
-4 spider upgrade $450
-shipping ~$170Total ~$2K!!!! Wow.So my new option is to find a 23 spline X-case and already rebuilt 23-spline tranny.Your thoughts...
Nope, not difficult at all to crank by hand. I just need someone to check voltage at the connector (and relay would be nice) to see which terminals get 12V and when (lights turned on, off, headlight button pushed, or not, etc.) It really wouldn't take much time.If someone would do that at...
Well, if youre having trouble getting your headlights to pop up then maybe we can help each other out here. Do this for me disconnect the plug going into the headlight motor and measure the voltage at each of the connections in that plug. Draw a simple diagram showing the layout of the plug...
I'm thinking of having someone local do my transmission rebuild (just can't stomach the $1000+ for a Shep or TRE rebuild). If I have a stock rebuild performed and replace 2nd gear with a new 2nd gear kit that includes double synchros from Team Rip, is there anything else that is a weak point in...
I was having difficulty getting into 2nd at anything over 5K rpm. I adjusted the shifter so that the cables lined up appropriately and got the slack out of the base. Now the shifter feels great, easy, tight! BUT!!! Now when I shift into 2nd and start into the gas the engine free-revs with no...
I just received my 650cc injectors today. They are installed, but I haven't run the car yet. I started talking with Jeff O. (KeyDiver) about updating my Stage 3 EPROM that he developed for me. In our discussions I mentioned my current S-AFC settings because I wanted him to add a bit more fuel...
Could someone point me in the direction of a schematic? My Haynes manual doesn't have the pop-up circuitry in it!Or if someone has a method to test the headlight pop up relay.
Thanks for the reply. As I think you know, I have a stage 3 Keydiver chip. I told Jeff what my setup is and by the looks of my logs he may have already accounted for the 2g slugs by lowering overall timing advance. I'll have to ask him. Your response has answered a few of my questions, one...
I have a '90 Talon with 2g pistons and Web Cams. What type of tuning details should I be aware of? Can I run typical timing advance up to ~20* at redline? Should I run more or less fuel because of these mods?Just looking for general thoughts on how these 2 internal engine mods will alter...
On my 1990 Talon AWD, it looks like the previous owner did the sleepy eye mod. That was all well and good until the other day when I tried to lower the headlights and nothing happened. Then a couple of minutes later the headlights lowered. Hmmm, bad connection somewhere?This happened a...
Thanks guys. Kinda figured it was synchros. Now what is the consensus on the TRE double synchro kit?Is there a better place (guess I should say cheaper) to get the kit... or maybe another alternative?
I've got a '90 Talon. Guy I bought it from said the tranny had been rebuilt. Under normal driving I can get into 2nd 90% of the time, no prob. When I nail it from a light get up around 6500 rpm and with clutch to the floor and very deliberate shift I GRIND:mad: !!Checked engagement point...
[/COLOR]So I want a 2g part??? I thought the Mitsu part number that I've listed in my first post is for a Galant? Hmmm.... I guess I'll just call them.
DSMparts has is for $28 and Diamondstarmotorsports has it for $14 - is the one from Diamondstar true OEM?And what temp should I get? 160, 170, 180, 195 F ??? I'd originally planned to get 180F....
I've been having problems with my '90 Eagle Talon AWD overheating while on the highway. I have other symptoms that lead me to believe that it's my thermostat and/or radiator cap. I found the thread on overheating with the Mitsu thermostat called out as p/n: MD997607. I went to my local dealer...
Just the other day I was driving home and my A/c started to die (osculated between hot and cold) when I looked down at my gauges I noticed that my engine temp was slowly rising. Even at 30-40mph I was having a tough time keeping my coolant temp down! Turning the A/C off seemed to worsen the...
Explain? By not wired correctly, do you mean is it still on OEM wiring?I have rewired the pump straight to the battery (via relay). The pump sounds like fuel pumps that I've had before. I just wondered if this particular FP was louder than others. It was installed on the car when I...
I need a couple of random parts (interior) and just like to poke around the local junk yards (call me weird).Anyone have suggestions on the best junk yards in the Houston (Sugar Land) areas?
BUMP - Any thoughts? I'm used to hearing a rapid, very distinct *click* from an injector, but these are making sounds similar to arcing. Are the injectors bad? I seem to only hear it at idle...I thought it might be spark plug wires at first, but after replacing those the sound was still...
Im not that much of a new-B here, Ive heard injectors click, but recently it sounds more like electrical arcing or similar coming from my injectors. Any thoughts? Is this normal?'90 Talon AWD
550 injectors with new pigtails
Where can I find o-rings for my RC-550's? Will new OEM (from the dealer) o-rings be the right fit?I'm asking only because it seems that some injectors have specific o-rings.
I'm looking for this same part... I checked with my local Mitsu dealer and they tell me that the part has been on back order for 3 months.Halligoo suggested going to the Jeep dealer... I called them and they're telling me that the part is discontinued!!!I've also tried a number of the...
I think you've made my point for me, thanks. You just lost all credibility with those comments. BTW, R is the universal gas constant (8.31 J/mol x K). I've used it a few times.As intake temperature decreases (through your intercooler), your volume doesn't change it's just more dense...
Ok, then I'll speak. Spool WILL NOT necessarily decrease.Check your definitions. Spool does NOT = lag. I will admit that 420aonboost did say "lag" and not spool. But the poster before said that an intercooler would decrease spool.Spool refers to a turbo's spinning up to speed and...
Halligoo - Was the part that you got from the Jeep dealer specifically for the Talon or a similar alternative piece? P/N?? Cost?I've been looking for this part too with no luck at all. I will probably end up finding a parts store that has a random selection of 90's (gas/oil resistant) and...