What would be my options on shipping a car from wisconsin to colorado, how would i go about that. I could probably drive out there and tow it back but it is a awd and you have to have a flatbed, and i dont, can you rent flatbed trucks and would they charge me big $ to put those kind of miles on...

Why wouldnt you put the 550's and safc in you said you already have them. Then get rid of the stock downpipe.

dont just go by one shops word, have another shop take a look at it. I sounds like the shop you went to just picked the most expensive job they can do on your car. They mght just be taking you for a ride, i would get another shop to look at it. Worst case senerio is you can find a 6bolt long...

even if your car is mechanically sound you would not be able to run 20psi on stock injectors with pump gas

wow 15,000 miles in 4 months, alot can happen during 15,000 miles. Get a good compression tester and test it again, make sure the car is warmed up and you have the throttle plate in the fully open position when you test it again.

you might want to post in the drivetrain forum under the automatic tranny sub forum, im sure one of the guys there would know.

depending on how bad the kinks are in the hose you can usually put a hose clamp on the hose where the kink is and tighten it until it squeezes the hose open and leave it on there. Kind of hard to explain but it does work

Yeah you will most likely come back, i am coming back to the dsm croud after getting out of it twice already. You will forget about it for a while then someone will post in one of your old threads that you were in and you will get that email from dsmtuners and you will end up checking out the...

search the classifieds

your going to need something to control those 550cc injectors

so why do you think this guy wants to trade you. If it is just a little problem I'm sure that the guy would fix it and keep the car but instead he wants to trade you for a car with more miles and is a n/t. Something doesn't sound right there

if it has a zr2 suspension package i would check out zr2.com

yea my bad i just knew that he put a different size pully on it

you could get a turbo colt, im sure your dad wouldnt think twice when he sees one of those little hatches

my cousin has a stock 03 cobra with just a larger supercharger pully and can run pretty consistent low 13's if he had better tires he could pull a high 12 i bet, and it is still under warranty. If i could afford it i would have one too.

Yea you have 390cc injectors and a 13g turbo, so the 450cc injectors would help but i would start off spending money on something else like a cat back

wow that is crazy

wow

Just got a new job at home depot at $10 and hour, not bad for a senior in high school.

nice good choice with the 250, how much was the wider swingarm and everything.

no need for liquid wrench, i have never heard of anyone ever breaking a head bolt

all i can say is at least it is an nt

yea what are you planning on using cad for, if you havent ever used it you should get a cad book to help you out.

yeah me too, thanks for offering to help me out tho

yea he thought it was just the gun recoiling, he didnt think anything of it and a couple days later he thought he just had a really bad tooth ache but when the dentist took the xray they saw the huge almost 3" nail in his face, the nail actually went partially into his brain, pretty crazy, i...

It is a good program i was in CAD class for a year and a half, its pretty cool, i miss doing cad but i dont miss the teacher at all.

did you check the classifieds here on tuners,http://www.dsmtuners.com/classifieds/showcat.php?si=texas&perpage=12&sort=1&stype=&cat=2&ppuser=http://www.dsmtuners.com/classifieds/showcat.php?si=texas&perpage=12&sort=1&stype=&cat=4&ppuser=You could find one for sure if you are...

I finnaly heard back from the guy today and i guess he was away on family business and the head got returned to him because of a shipping error, thanks for the help, i feel bad now that i just assumed he was scamming me, thanks for offering to help me out tho guys

Delivery confermation at usps is like $.50-3.00 im pretty sure. I know what that feeling is like when you feel like you have been screwed luckly in your case you use paypal i got screwed using western union.

omega- nice muffler i like the raw look i think im going to do that on my 1g :thumb:

yea that intercooler wouldnt spray anything any where except air, you could have just blew off a radiator hose there isnt really a way for us to tell, just go out and take a look, you pegged the water temp gauge and still drove home like that, what are you thinking

watch out oil on the timing belt could make it slip and most likely bend some valves.

thanks man thats what i was going for, what do you guys think, or should i keep the black on top when i repaint it?

thanks, could you also do the top and spoiler where it is black, thanks alot

would a better picture help?

A cylinder head, its the upper part of the motor that consistes of the valvetrain, thanks alot for helping me out he wont answer my calls or anything, thanks again

cool thanks man, my name is Scott Mahala, and i bought a 1g head from him.

Here is some info on him and his little friend just in case someone wants to go jump him for me, hahaPatrick whitten phone #'s: 603-464-0223 po box 1221 603-568-8625 hillsboro NH 03244Pedro...

yea i just was wondering if anyone happens to know him or of him, i bought a 6bolt head off of him about a week ago and once the funds were recieved by him i havent heard a word from him since. The address he gave me is in Hillsboro though. It seemed like a shady ordeal to me because i had to...

Vaux: Plague music, they are a local band

Does anyone by chance who is in or near the Concord NH area know a guy by the name of Patrick Whitten, he sells alot of parts on dsmtrader

Shift kit huh, im guessing its and automatic, no way should you pay that much for a 95 with that many miles, you will have alot more fun with a 5spd and you will put more power to the wheels

i dont see what a brand name has to do with performance at all, all it does is add money to their retail price on parts. You would rather spend $500 on your apexi cat back when you could get a full turbo back 3" SS system with hi-flow cat and your only reason is because it is made by apexi.

Can someone make the whole car the color that the sides are its the factory dark cherry red i believe? Also if you can try and fix that dent in the rear quarter panel and also the one up front by the turn signal, thanks. Sorry for the bad pic

saleen s7's are crazy and then to TT it that is insane, but i still think i would rather have the chrysler me-412.

there is a guy local that does exhaust on dsm's and he is amazing from what i have heard and his price is even better, full 3" mandrel bent turbo back exhaust tig welded stainless steel including a 3" cat and the flex section for $500 all i have to supply is a muffler. That is a steal for a full...

I think machv.com has them for about $16 for a set

Man i wish i was that lucky and could find a car like that. :thumb:

valve seals not valve guides