anyone ever have there heater quit blowing. Well i just did so i tried replacing the heater motor that didnt work. I have checked fuses all seem to be good assuming i have checked the right ones anyone have this happen?

I have a set of darrens cams in my car and while I have never had experience with hks I am very happy with ffwd's cams. These are the same cams he put in his race motor in his car. Darren is acually a very good freind of mine and I can tell you if he did'nt firmly beleive in them, he wouldnt...

Darren builds awsome motors. He is very meticulous in every part of the process. I would put his motors against anyones. I have heard the comment he is kind of pricey. But, like the saying goes, you get what you pay for.

ok I have 90 awd and I need to remove the caliper to get the rotor off. First off im confused there is one long bolt that goes thru one end of the caliper. then on the other end of the caliper there is what looks to be a bolt thru there but it has no bolt head. then we have 2 bolts that attatch...

Ok I have a 1990 awd and i am replacing wheel studs on the back. my question is , if I have me rear end jacked up and my front on the ground, since it is awd, can i still rotate me rear wheel with the front wheels on the ground. I know you cant tow an awd car with the wheels on the ground, you...

acually guys little brain fart i have the 255 walbro pump. also i do not have an adjustable fuel regulator. Any one think that is a must? :confused:

I am a good freind of darrens at ffwd. I have seen this same comment on this site like 5 times now and it just burns my ass. Darren has always built all his motors right there in his shop. When ffwd was first starting out he did use some of bj's heads, but that was all. And that was because...

OK my car has been resting cause wallet was empty. Now wallet is full, time to empty again. But need advice. Have an awd 1g. 3 catback exhaust 2.5 downpipe, 2g mani, upper ic pipe, crushed bov, hks cams, 550 injectors, safcII, 17c turbo, wallbro 190 fuel pump & a mbc. Here is what we are putting...

Ok I here people on here all the time say that theyre quarter mile time would have been better if they could have gotten a better reaction time. I didnt think reaction time had anything to do with the acual quarter mile time. If 2 cars, that both run a flat 13, race and one has a better reaction...

Ok first off im not shooting for more than about 425 hp right now anyway. And second, I dont have the money for a front mount i got the supra for 100.00 and between me and darren we can fab it up the right way for 50 to 75 bucks in materials so that is under 200.00 for an intercooler that is...

What do you mean by that. I got a buddy with the same setup running 12.40's. The supra ic is good for 450 hp and surely you cant have a problem with the 20g. So why dont you tell me what is wrong with my setup.

Just had to tell everyone about new goodies. I got supra sidemount ic. stuff to convert to 2g mas and these are what I am really smiling about. DSM LINK AND 20G TURBO!!!!!!!!!!!! Ok I'll quit yelling. This is quite possibly the best day of my life. I am living in a cardboard box now in order to...

Man I definately would not stroke a 7 bolt. If you do there is a fair to good chance it will crankwalk again. I would definately get a six bolt block and stroke it. Maybe the 7 bolt wont crankwalk but why would you want to take the chance. I dont know if you just want to buy a motor or by the...

Im going to have to agree with river. I prefer FIC injectors as well for the same reasons. Im not saying densos suck but I will say I think FIC are much better. However dont get RC's they do suck!!! Ok now the RC lovers can flame me. :thumb:

OK I think the answer is yes but, I have afc, 550's. 255 pump, hks cams, and all supporting mods im running 17c turbo and stock smic. Well im stepping up to a 20g and a supra smic. Just wanted some opinions on whether I am going to have to step up a size on injectors. :confused:

I would not go with a mark3. I have seen those and I dont see how they would be an improvement in our cars. The mark4 however is proven. I just ordered one myself. I also Have a freind who has a 90 with a stroker and a 20g, he is using the mark4 and he runs 11.80's. I know there is a point where...

Oh boy this is gonna hurt!! :D

So does that mean he shouldnt trust you madgrl your not a wiseman. First off, no I am not a wiseman but I think I am knowledgeable enough to respond to this :D If your car is bone stock then I dont know how you could be experiencing fuel cut. You have not entered more fuel or more air into the...

Oh um, well oops. i guess I get a little touchy sometimes. Im not taking my medication. I refuse to take it. Those cute little fuzzy bunnies are up to something I just know it!!! :mad:Well anyway, carry on!!!!!!!! :D

Ok so I assume you are talking about my posts, the ones you referred to as utter shit. First off what I said, if you can read is, not all 7 bolts have crankwalk issues but some do. There is a crucial 3 letter word in there (NOT) if you dont know the meaning I suggest you look it up. And second I...

I know darren at ffwd, hes a very good freind of mine and he puts out awsome motors. I dont know the guys at sbr but im sure they do as well. If i were you I would go with one of these guys they specialize in these motors. Therefore I think they would produce you a better motor than someone who...

Alright this guy asked a question in a very polite manner. Isnt that what this forum is for? He mispelled one word, give him a break. :shhh:And by the way not all of us can afford to dyno our cars, again isnt that what this forum is for advice and opinions from other dsmers

Thanks for the help guys I think im going to pass on it. I didnt realize it had a 10cm housing, im not an expert by any means but that just seems way way to big. Shouldnt it be like 7cm?

Ok guys i found a 20g for a good price and judging from the numbers on it I think it is a TD06 but im not sure. I want the TD06 not the 05. So here are the numbers on the turbo TD06H20G-TD0510CM2 I assume these are the numbers stamped on the turbo. He said he thinks it is a Td05. He said he...

Does anybody know where I can get an eprom ecu for my 90 talon? I want to run the dsm link for 1g's. I hear they will be out shortly and I am assuming that you are going to need an eprom in order to use it. But even if they dont release the 1g dsm link I would still like an eprom so I could get...

Yippee I have heat. Weird but all I did was replace a fuse that wasnt broken in the first place. I checked the wires going to the resistor pack with a test light and got no power so I figured that it was in the switch or somewhere before the switch. But when you turn the ac on and turn the dial...

Thanks Defiant you really seem to know these cars. I am going to try to look at this more tonight (my wife has the car now). I do not think it is a fuse because it starteds working once then quit again shortly. Also I read the thread you pointed out, im sorry I didnt search in the first place. I...

Ok not to sound like a complete idiot but what in the world is a resistor pack? Your not talking about a relay are you? Please explain more I would greatly appreciate itThanks Igor

You might look into doing the supra smic if you are looking to save money. You can pick one up for around 125.00 and from what I understand they are good for up to 450 horsepower. I think you have to do a little creativive piping but still much cheaper than fmic. My buddy has one in his car, he...

Ok yes it has a manual transmission. It also has aftermarket clutch. Yes it has the 255 fuel pump but no afr. I launch at about 5300 rpm and i slip it. however im getting awsome launches squats on the back two tires and goes. I run 93 in it. And I was the only fat person in it.

Yes the fan does not come on.

anyone ever have there heater quit blowing. Well i just did so i tried replacing the heater motor that didnt work. I have checked fuses all seem to be good assuming i have checked the right ones anyone have this happen?

I have 64 chevelle wagon with a big block same thing as a matter of fact a 468 has roller cam 588 lift, about 9 and a half to one compression stock heads with a little port work, victor junoir intake 850 cfm demon and a 3:73 posi. On slicks I run 11.20's and that is a wagon that weighs 4300 lbs...

I have done a leakdown and compression check. I just put new head on when i put cams in, so i did it then every thing was a-ok. I will check turbo but i think everthing there is ok to. I did the cams injectors afc and upper ic at the same time, and I had a theory that maybe the stock mafff with...

Hey guys, my name is john im kind of new to the forums, but not really a newbie. I have a 1g awd. It has the following mods, 17c turbo, upper ic pipe, crushed bov, 550 injectors, safc, hks cams, fuel pump, full 3 in exhaust, manual boost controller, stock maff and intercooler. I think thats it...

Your threatning to boot me because im being a smart ass but yet its ok for you to be an ass to me? I had no intention of saying anything else to 98 about this matter. You are the one who has kept it going but if you want to boot me because I did not bow down to you go ahead and i will sign up...

Entered spelling bee and didnt know it, oops.

There are many shops and sponsors on this website whom i know nothing about and my point simply was I would not discredit them having no expereince with them and like great huskie says, when you say someone does not build theyre motors and they just buy them from someone else and upp the price...

Um, I did correct him and move on. I hope capitalization and punctuation made this easy to read.

hey stik6 i hope you will call ffwd and talk to darren your self what 98 said is very incorrect and the reason darren does not post prices of motors on his website is because there are to many varibles to consider when building a motor. he would rather speak with you first that way he can quote...

He is right, you really should not go shooting your mouth off. Darren at ffwd is one of my best freinds and I have watched him build several of these motors HIMSELF. He is very meticulous and takes great pride in his motors. Example, he just went and spent 2000 dollars on on a jet wash cabinet...

just for the record thats incorrect info darren does build his own motors he also does so very meticulously and with great pride after seeing him build a motor when i got to have one done hands down i will have him do it ffwd connection is a very honest knowledgeable and profesional shop:thumb:

hey runner just wondering if you ever checked that shop out hope you do they take pride in theyre work very good shop and tell darren that igor sent you

hey man if you are wanting excellent quality in your car go to ffwd the guy who runs it is very meticulous in his work and he knows his stuff. he takes alot of pride in his work as well. i dont know if you can get all that done on your budget or not but he is the guru he could tell you and i am...

hey whats the status of that video i would love to see it

hey guy if you are still looking for a shop to do upgrades check out ffwd connection in tulsa the guy that runs it is a very good freind of mine and if its dsm he knows it you can check out his website its ffwdconnection.com i think just do a search and you can find it the # to the shop is...

Hey twitch does F & F stand for fiction and fantasy lol