Hey group does anyone else have an issue with their moonroof rattling and wanting to lift at higher speeds? I am having this issue now. I know there is a spring on the handle, I will try to replace with a stronger spring. Also open to suggestions. Thanks.
Ok I think I found an answer to my question. This plug and play will work with the 1G DSM MAS connector:https://www.extremepsi.com/store/product.php?productid=27533&cat=1837&page=3
Need help, I am a novice at best when it comes to ECMlink and have a question about running speed density with ECMlink on a 1G. My tuner is suggesting I run speed density with my newly aquired DSMlink chipped ECU. He suggests I get the plug-and-play kit that would allow him to tune using the...
Hey guys if you are looking for a nice leather shift knob to replace your worn out unit I recommend the 203-2008 Hyundai Tiburon OEM shift knob. It is an attractive leather unit that feels very comfortable in your hands. It is also a direct replacement so it screws right on with no...
Hey group we are holding a Starquest / 3000GT, Stealth / DSM meet in San Antonio, Texas on 12 August 2017.Take time to meet fellow drivers with a similar passion. Bring what parts you have to sell or trade. Promote your shop and services.Dave & Busters
Address: 440 Crossroads Blvd, San...
UPDATE: Problem solved. Just got off the phone with RRE and they are going to make me a downpipe with the proper flange and angle.Thanks to everyone who responded and tried to help!
Hey group I have an evo3 O2 installed and having issues with downpipe hitting transfer case. I know the angle is different but does anyone sell a compatible downpipe or know a work around to get it to fit properly? It's for 1G AWD by the way.
Hey group I have a 90 AWD, 5 speed transmission and the shifter feels like it has excessive side to side play on it. I took the boot off the shifter and noticed what appeared to be powder each side of the shifter itself - almost as if some sort of washer where ther at one time. Plese take a...
So I noticed the car makes a thump in the rear when I shift from 1st to 2nd. If I accelerate slowly there is no thumping but moderate to fast you can hear it. I did a visual inspection and the rubber on the carrier bearings look very worn. Does JNZ still carry the driveshaft rebuild kit? Also...
I have used Premiere Motorsports and have always been satisfied. They have worked on several DSMs and are current and previous owners of DSMs.(210) 520-19767225 Eckhert Rd, San Antonio, TX 78238Near Thunderbird Hills and Northwest Side
Well I found a remanufactured 1G alternator rated at 100 AMPS so no modifications required as in the Saturn alternator - which is also a great unit from what I read.Any mods besides upgrading the fusible link to 100 Amps?
Hey folks I noticed my car will be hard to start sometimes, recently replaced battery with new unit.I tested the voltage on the battery at idle and it reads a steady 14V, with the head lights on it drops to about 13V and with the headlights and A/C on it drops even further to approx. 11.5V...
Hey folks setup consists of Evo-3 turbo, walbro 190, ETS street FMIC, FIC 650s, and S-AFC. I'm having problems dialing-in the 650s....with boost set at 20psi and S-AFC set to -38 from 3200rmp - 7000-rpm the car is still running rich. Did boost leak test and car holds 30psi steady...Anyone else...
Sorry to hear that bro...Hopefully things work out. In my situation my packages are always delivered to the wrong house with the same house number on an adjacent street - lets just say I don't always get my mail.
Last minute information before the meet:Spoke with management and was not able to reserve seating or parking due to time of the meet conflicting with peek hours of business. We can however get there early and save our own seating.Vendors will NOT be able to setup any booths/tables in...