I didnt do it I got the car like that when I bough it. I am starting to try and finish it. It was running good and the fuel lines were right before I upgraded the manifold and turbo, now it tells me is running lean, I dont want to tune or mess with it until I get this other stuff installed...
Its a slow process since I don't even have a job. I am getting this from friends and familly. Thanks ofr the help. I am also selling some stuff to get a wideband.
Sorry about that, I do need to upgrade my mods. I an running a dsmlynk 2, Injen intake, tubular exhaust mani, 20g turbo, I am waiting for an fpr and the 255.
Thank you very much for the reply. I was reading a 3gt forum and found out that even the vr4 owner upgrade to our 450s. LOLI also have some precision's with a pn of 041-0651, they are supposed to be for domestic, I think for camaro, they flow 65 lb of 650cc, disk type hi impedance, 14mm...
I upgraded my my stock turbo to a 20g with an external waste-gate and installed a tubular exhaust manifold. I also installed a fmic from an evo and a manual boost controller.
I run a greddy bov, dsmlink 2.5, autometter gauges.
I know I need bigger injector, fuel pump, afpr, wide band...
Well eveey person has a different taste, no one should judge anyone else. Body kits have a function, the law of aerodynamics has proven that. I will give that with the fad of body kits many companies provided a product with no functinality, but looks, targeting the low budget person. Godbless...
I dont think its funny at all, I couldnt wjatch the entire video, boring. I was at the daytona beach last saturday and seen someone doing this and thought they were stupid. Know I am convinced, its the dumbest thing ive ever seen.Sent from my SGH-T959V using Tapatalk
If you have the vga to usb adapter and the vga to obd2 adapters you can pick up a printer cable and a vga cable from any electronics store. They are regular computer cables. No more than $25.Sent from my SGH-T959V using Tapatalk
Do we ever think that some of us are on a budget and cant afford to dump upwarx of 500$ for a turbo. I mean its not just the turbo, but work, injrctors, fuel pump, ect. I say go for it, its a good deal, if it is an inferior quality part, just try not to push it to its limits.
Sorry for your loss, it is hard to deal with. I personally take it as part of neing part of life, and remember them as they were and rejoice in their life. Drinking is just adding to the problem. When you soner up, nothing has changed, then you have to deal with whatever event took place while...
Hello all:I am new to the area and would like to know how DSM'r get along here. I am working on the car and looking for parts. So there are meets or clubs, just getting together to work on a project drop me a line. See yall out there. :hellyeah:
It seems tou havea goid start, there are some vendorsand I thing some write up that provide upgrade listing by stages, they helped me out a bit. I personally get involved in what I want vs what I should logicly upgrade in ordee to end up with a good build. Seems u on the right track. Good luck.
It is always sad to see anythingbad happen to someone especially a fellow enthusiats.Street racingis considered a problem with no solution. The government imposesthese rules but provides no resolutions. My hats go out to those who have a track with in driving distance, many dont have that...
I like it. If it is made in a suttle way. I like sleepers so I would fo it in a way where it wont stand out to much . but I like it. Do it and make a small write up outlining the materials and stuff, I migh do it too.
Hey guys, im down for a small meet. I get off at 10:30. Let me know what yall doing , Ill be there. I also have a fmic to put in, so we migh be able to do some brainstorming.......
I took the flywheel to get resurfaced and they took off .012 off, the xtd clutch disk seems way thinner than the stock one. I got a new folcrum ball and release fork. Do I need to shim anything, any suggections before I put this in tommorrow....
OK so after 2 weeks I have the trans out. The throw out bearing was mangled. So I ordered the bearing clip since it was non exciisting in between all the matal char I found. I ordered a stage 3 xtd clutch. I read lots of the posts here and for the money is is the best I found. This thing...
Well, it is a bad throwout bearing. I am in the proccess of taking the trans out to replace the clutch. There are nasty noices coming from inside the bell housing. This is kicking my but, never done it before. Im stucl at the ball joints, All is done top side, I have to take the axels out...
When I took off the slace cylinder and started the car by pushing the clutch sensor it starts and I get no noice. I think the cylinder will be the problem...wont know till tomorrow. The cylinders puch rod was fully extended, All I had to do was push on it to mode it out of the way,
Car wont go into gear, I lost all preasure of the clutch pedal. When I pushed the pedal I got a lot of noice from the clutch and smoke, now the slave cylinder is all the way way pushed out and if I start the car makes a lot of noise. I will be changing the slave sylinder today, Hoping is not...
What's up guys.... I been in Clarksville for a year and had 2 dsm's. I had to sell one but I love them, I have had 4 in my life. I presently have a 98 GSX. I have seen a lot od you rolling around but havent met anyone. I would love to get together, have some fun, help each othe , trade...
I say no it wont be posible.
The stage 2 torbo kit is closer to 3k than it is to 2k.
If you gonna turbo you should build your engine.
Rods, pistons, rings, will be close to 1.5k.
Then talk about clutch, suspension and all the supporting mods neded to do a good job.I say yes if you...
This is my opinoin and my opinoin only.I would not go with anything else other than 19's.I just got mine and it is the dopest set up.Arospeed RSGT 19's
Tokico Springs
Tokico Struts (blues)
Ingalls front and rear camber kit.I love it.
OK coll
Thanks much everyone.I will replace everythings and install the canber kit and drive it to the shop to get aligned. I will post pictures when its done.
any idea how many shims should I put in the rear to start of with. IM droping 1.75 inches.Where should I set the front. Or should I just install them and leave the resr to the shop.
you know , go for it.I bet 10 years ago someone also caled people crazy when they hearthen talking about a 4 banger rinning low 9s or faster.People around here talk like nothing is posible.
Well I think I can say acouple of things.I think a lot of the problem is people joining the sport an not knowing all about it. Once the learn then the madness stops. everyone of us has done something rice when we started up.I would also say, I hope all of you who have the money to...
Ok im buying my suspension.
I have a couple of options.1. OBX Racing Type R adjustable suspension.2. Tokiko Blue Shocks and Tokiko Springs.3. Tokiko Blues with arospeed springs.PLease let me know.
thank you much.That is Muphys law.When working wiht more than one screw, you will have problems with at least one.
And if you working with only one screw, it will be a problem.Tks manI will order mine next week.
Then those new 19" Arospeed RSGT rims will look nice.
IM thinking about this kit also. I had heard good things about tokiko struts but nothing of their springs.What you say about the back making a noice, have you found out what it is. That has me concerned.I would like the kit though.Let me know what the noice is, tks.
Go OBX
I have an OBX full cat back and it sounds good.Then it also depends on what you want for your car.If you gonna go full race and try to be the next papadakis then go for the expensive ones.If you just like the next guy who runs the street will see track once in a while then...