Hi,Can anyone give me a review on this boost controller?I found that my autometer boost gauge is ####ed up, and i just find this aem gauge style boost controller. If it works geart, i might just get one and replace the autometer boost gauge.thx for any feed back.
Yes, you are right. i take a closer look at the lip, and there are cuts for the grill to fit the eclipse bumper. But it shouldn't be too noticeable if it's painted same color with the bumper. Now the thing is i have a white talon, and i want to leave it back to match the black roof and it should...
HI, i am looking at this front lip for 95~96 eclipse on ebay.http://cgi.ebay.com/ebaymotors/95-96-MIT-ECLIPSE-RALLIART-FRONT-BUMPER-LIP-SPOILER-PU_W0QQcmdZViewItemQQcategoryZ36475QQihZ013QQitemZ230080615966QQrdZ1QQsspagenameZWDVWBut i m not sure if it will fit my talon. I did some...
Hi, i m looking for some springs that doesn't lower the car too much, and also not too stiff.
Because the springs i got right now, comes with the tokico blue suspesnion kit which is way too low and stiff. I don't get much feed back from the car, and it's a little too jumpy on the street.Let...
HiI just got a T28, and i want to know what gasket will i need?
washers for the oil lines? gasket for the water pipe??
new bolts? any tips?thx for all the help
why do you need an oil pump?? you having low oil pressure?
oil pump isn't really a maintenance item, usually people change it when they rebuild the engine.other maintenance items would be
fuel filter
all the fluid on the car
Your block should be ok, if u can't feel any groove on the top where it change color.
The very top of the cylinder is different color, because the rings don't travel pass that point.
i think the brown tint is from engine oil, there should be small amount of oil to lube the piston rings.If...
17.5lbs for 18", that's a very light wheel.i like the 5-spoke with polished lip more, but i am pretty sure it's heavier then the enkie since most wheels are heavier then 17lbs for 17", unless u go with the forge ones.
So i find this b16g for sell.http://img31.imageshack.us/my.php?image=small7py.jpgBut there is a crack on the exhaust housing(see pic on the right side of the exhaust housing)The guy tell me it's about 1 inch long.I want to know how bad is that crack? is it bad enough to cause an...
So, i know a guy who works for BG who can give me deal on any bg products.I just want to know what are some of the products that's really good?i am going to get the BG syncro shift II, and the intake thorttle cleaner.Are their engine oil or engine conditioner any good?thx
it can be jsut dry bushing. not sure if that's what's your problem.i have the problem with the front right upper control arm bushing. I just put white grease all over the bushing, but ones in a while the noise will come back.
it doesn't look too bad.i run 15.7 with my pretty much stock 95 tsi awd(bov, filter, short shifter), but i think i can do better.2300fl above sea leveland i think there is something wrong with the dyno # u got.
So after i install a dp and take out the cat, the o2 reading on my af gauge is ####ed. Now it only reads lean all the time. sometimes it doesn't even light up. So i did some search, and find that it might be the o2 sensor. But my check engine light never come on.So, is it my sensor not...
something like this?http://www.maxspeed-motorsports.com/oiladap.htmlhttp://www.maxspeed-motorsports.com/atcooler.htmlbut don't know if it would clear a 3"down pipe.
I have a 95 Talon, white. I was thinking all car has clear coat, but i am not sure.
Does anyone know if i have clear coat on my car? or is there a way to tell? Can the clear coat be gone after 10 years?any help would be great, thx
Thx for the reply, but does the homedepot one says any numbers on top??
thx for the link, but i don't want to spend like 20bux for the bolts since i don't even need all of them.
The only bolt that i can find that is M10x1.25 30mm long says it's 8.8 at the top.
Is 8.8 strong enough??? or do i need something stronger??
the last thing i want is the rear upper control arm falling off.Thx alot
so what u say, the stock woven type is inefficient, how does it inefficient?? i would really like to know more, since i will be putting in my supra smic soon, but not sure if i should replace all the pipe, or just the restrictive part of the pipe.thx
Just listen to most of the people, DON"T vent.i have the hks ssqv, and i tried vent and not vent.when u vent, all u get is the sound, that's all. and u lose power....
u can try it urself, at a hot day, try to drive it vent with the ac on. (it feels like u r driving a civic)
after that...
if u really want to get slotted or dirlled rotors, get the ones that's slotted, dirlled ones are useless...If u r changing all the clutch and brake fluid, maybe u can get some ss clutch and brake lines too....Also changed the tranny, x-case, and r diff fluid.
p/s fluid
battery, if...
i use the 94octane with the mix of ethenol. my car runs perfect. used for more then a yr, not one problem with it.not sure about the 85% ethenol....but for sure u will need to do alot of tuning.
i want to know y no one would run 3"dp and 2.5 or 2.75 exhaust ??What i heard from others are, gas will cool down whent it exit the engine/turbo.
So after the dp, the same gas would take up less space.....would means dont need as big as an exhaust.everyone understand this right?...I...
Yeah, i know it doesn't look good...but the point i put the seat and steering wheel in the car, is more for my driving. Not really for the looks of it....And i can tell u, no adj seat SUCKS BALLS.....it's damn hard to get in and out of the car...which really sucks for daily driving...
my hood and washers mod...the down side is, u need to be careful when u wash the car. Don't get too much water in there...but i never have one problem with water going in, usually just a little bit....and i didn't remove the weather stripping.
That is 100% true. My friend's honda del sol with a removeable hard top, it leaks like a bi***......hell....even my 95 talon leak a little bit from the window, when i wash the car with pressure wash....