Radioshack also carries these types of plugs.Thanks for posting an ebay link to this though. :thumb:

Ctrl + Print Screen is what I use on the computers at school.

In 07/08 I was more than likely playing with my Hondas. Why does that even matter? You admit that he left but, HE IS STILL TAKING DONATIONS FOR DEVELOPEMENT! He is accepting money for something he does not intend to do. Maybe you know something I am unaware of, did I miss something?I have...

You could also add the difference between the deadtimes (950's and 660's) to all the values in the table.

How do you know how rich the car has been running? Are you constantly pulling plugs to "check" for this condition?I would say you answered your question in the first post. Replace the primary (upstream) o2 if you know it has failed.Autozone carries a denso o2 for right around $50.

Did you even read the post above yours?Regardless of how you worded your question, it shouldn't be in this thread. It was a general question about how to scale your injectors and set your battery offset table.

After I graduate, I will have time to learn what I need to know in order to manipulate the definitions. I was simply trying to get someone else off their ass *cough* Ceddy *cough* that said they would do something and didn't. He is BASICALLY scamming people for DEVELOPEMENT money but, I seem to...

Please refer to the post above you.

I think it just needs to be re-scaled. It would be nice if there was some type of fail safe for over boosting but, that may be asking a lot.

I'm nearly positive we can use egr.I've been so busy with school, I haven't had a chance to test it out. I may or may not have time between now and graduation. It really depends on how quickly I can get my projects done. Aiche, DMC and 2 others ...

I have indirectly done business with Mike at FIST several times. *I needed something, stopped by and he gave it to me ... tried to give him money and he just smiled, telling me not to worry about it* The guy would give you the shirt off his back with a big grin on his face. He is extremely...

All I really did was re-scale the load column on "Wastegate Duty vs Load". I also zero'd out all the DC's (I wasn't sure which ones did what). Then started coming back up with them, funny thing is, I never could get it to ramp to anything other than 100 LOLThe only way I have of knowing...

I can adjust the pressure up to about 4k, then it ramps up to 100% duty cycle. I went ahead and stuck a mbc in the car for the time being.It appears that we may be able to use the egr options to control boost. If I figure something out, I will post back. It's odd to me that no one is saying...

I've searched and read and asked ... haven't found any recent information and haven't been responded to so, I'm making a thread.Has anyone got it working correctly?I have played with the duty cycles, duty vs load, duty tps trim but, have yet to actually have the car control boost.I...

Maybe it's something with the new version of evoscan? I believe they have older versions listed on their site.

Did you delete the folder it makes in my documents?

For the 3rd time in 2 pages:

I problably have them. I'm going to be at school pretty late so I doubt I will have a chance to look at what I have until later tonight.

Sounds to me like they would ;)

Unless there are updates for our specific hardware ... I won't update.

The only things that weren't right (for me) were the TPS scaling and DTC's. I still can't get the correct trouble codes but, I did get TPS to read from 0-100%. After troubleshooting a pig rich idle because I didn't trust evoscan's o2 data ... I now trust it much more ROFLI need to spend a...

What base settings did you use for latency?

Which version of windows are you using? I believe you may need to install it in another directory *outside of program file*It may also have something to do with updating too. If you had a previous version of it, even if you un-installed it, you need to delete ALL the evoscan files because...

Have you tuned the latency (aka batt. offset, deadtime) table?

Did you actually purchase it or did Ceddy just send you a copy of big maps? If you didn't buy it, now would be a good time to spend $30, even if you don't need SD or BigMaps ;)

Has anyone used the w/g adjustments in the current ceddymod?I bought his software and sent him several emails but, he has yet to respond to me. It's hard to understand why someone would put so much time into something and not finish what they said they would. If he came back, and charged 5...

I tried to download your log but, I'm not going to jump over hurdles for it.What does your o2 (primary) voltage look like?What type of feedback is your knock sensor giving you?What do your spark plugs look like?Did you adjust your deadtimes? (batter offset, latency ... people...

OP:What is your fuel pressure?

or make your own thread.Any idea of a way to get ahold of him? He doesn't respond to emails at all. We could just start flooding his forum with traffic to see if that will get his attention LOL http://ceddy.us/forum/index.php?board=9.0

I was guilty of this too but, this thread is not for questions like this, if you have any questions pertaining to flashing ... use this thread

10 months ago he mentioned that he was finishing it up.I doubt it would take much more time. Here in the next few weeks, if he hasn't at least come back to give us an update, I plan to sell one of my H8's to get an evo computer. I really thought bcs was coming. Hopefully he will do what he...

Did Ceddy ever finish boost control? If he didn't, why don't we put a little money together to get him back on it? At least so he can finish what he started. His software is dirt cheap compared to similar options.I'm in for $100 if he will help out. Lets support this fool and get him back...

Thank you VERY much for explaining this.

Excuse my ignorance but, can you elaborate on this? Maybe explain what it is (yea yea, obvious context clues). How would this be tuned? I'm not being a smartass, I simply do not know the logic behind how to tune those values. I.E. when to increase or decrease and to what degree.

So what you are saying is that you are going to revise your unit because you saw the Jay Racing unit? :rolleyes: Cut it out :rolleyes:I've been a fan of yours for years and have a lot of respect for you. I've grown up watching you go bigger and faster. From what it sounds like, you didn't...

^^^^^Everyone should learn something from this ... I had a buddy pop an alternator belt at IFO in Houston last weekend, we didn't have an extra belt and we didn't have enough time between rounds to set the latency because we had several friends running in different classes.Tune the...

Yea, I would still like another computer to have laying around though. They seem to be getting harder to find these days.I don't know if this was the cause of several of the weird problems I was having i.e. the car throwing a speed sensor code and the speedo working, knock sensor code...

There are easier ways to verify if the pump is working than hacking up a fuel line. I like that part of this thread where you blamed seafoam for causing you to go apeshit on your fuel line. Maybe you have been hitting the seafoam a little hard ROFLConsidering you botched a seafoam cleaning...

Hopefully nobody deletes this ROFLMy 99 gst black box puter has a leaky capacitor and I need a new one. If anyone has an extra computer laying around, shoot me a PM ... I really need one.I'm going to do my best to fix my board. Several of the relays have rust around them ... a couple of...

Just sayin ROFLComing from tuning honDUH's with crome (bseries) or kpro (kseries) ... I realize how easy I've had it. Kpro damn near tuned the car for me ... lambda overlay w/ a STOCK functioning wideband o2 ... SRSLY? I'm just not use to the software and still getting the hang of...

I would like to be able to tune in real-time. :sneaky:

I was with the green crx and white integra by you guys. Sorry about the DQ ... car was running good huh? First pass off the trailer it went 8.7* LOL Car looks even better in person.They need to do something about parking. It got ridiculous just trying to get back to the trailer to work on...

Did you turn it on? My clutch switch is bypassed also.under "ceddy mods setup bits", "launch control" should have a 1You may also check the speed in which it disengages the stationary rev limit.

How to calibrate evoscan to read correct throttle position:Step 0: Go to the evoscan website and read. But, since we both know you are too lazy, continue to step 1.Step 1: Right click on the TPS cell and left click edit. Then clear the EVAL formula out, literally highlight it and hit...

I haven't been so lucky ROFLI can't figure out what is causing my car to run so rich at idle. Guess I'll keep chugging along tomorrow and try to figure it out.

Rather than playing the guessing game, what mods do you have?

Do you have a log?

From what it looks like it can log any 5v signal. This is good to know.Thanks for posting this. :thumb:

I'm a plain vanilla man myself. MAYBE chocolate chip cookie dough but, that is rare.I am entertained!

What else would it be used for?