I need to pull the block on a 98 GST 5 speed to inspect after developing a rod knock. I am hoping to pull the engine alone as I need to be able to role the vehicle out of the shop once Im done. If the front components and balancer/harmonic damper are removed, can pressure plate clear the bell...

I'm in need of a good block/rotating assembly. 7-bolt for a 98 GST. Car has a rod knock. Head is fresh, just need a good complete engine or just assembled block. Let me know what you have.

I'm trying to tackle the infamous lifter tick that several Mitsubishis I've owned have had, and still have.. This may be more of a general informational thread than a direct question in regards to my vehicles. I have done a lot of research and read the doubtful fixes that many have come up with...

I'm looking into a 99 GST with a few issues. Most I'm familiar with. But it also has a P0505 code (idle air control valve) and a P1105 code (fuel pressure solenoid malfunction). I haven't been to look at the car, but I'm wondering if anyone knows what the common cause for this code is. Does the...

I have a 2.5" catback with the cat still installed, and I intend to keep it that way. It's more important to me to be smog legal these days than make every last hp out of my setup, but I do like to make what I can. I am wondering how bad the stock downpipe is and if it makes sense to change it...

I am going to fix the final leaks on my engine. The oil filter housing/cooler is one of them. I am looking for the seals for it and I came up with these. They don't look the same, but seem to be advertised for the same thing. Which of these is right? Or are both right, just look different...

So ever since I rebuilt my head a few weeks ago, I get a strong exhaust gas smell under full boost. Only when I really get on it. I used the gaskets out of my $50 head gasket set, so they aren't the best I'm sure, (you know, that kind or silver covered paper gasket you normally see). I've...

Turbo2g submitted a new DSM Profile :2g rebuildRead more about this vehicle here...

I just have to vent about the 2018 Eclipse Cross. I haven't even seen this till now. If you haven't seen this disgrace, go to Mitsubishi motors and check it out. The fact that Mitsubishi would dare give this crossover suv that looks the same as all the other stupid suv's they are putting out...

Iv'e had a bad antenna since I picked the car up. I ordered an assembly that claimed direct fit from flea-bay with my initial parts list. Turned out to be a universal design and I didn't want to cut wires and ruin the harness in case it didn't work. Besides, the bracket was different also. So I...

My shifter is sloppy due to very worn out bushings at the transmission end of the cables. I am debating on a couple sets from extreme psi. They have a poly set from torque solutions, and a solid aluminum set of their own design. Would it be noisy or harsh to use metal? Or would the poly set be...

I bought the car (98 gst) with a torn inner and outer cv axle boot on the drivers front. Due to both being torn and quite gummed up from a long period of time, I replaced the entire half shaft. The outer boot has torn again in almost no time. I have't found anything coming close to hitting the...

I just wanted a verification of the exhaust pipe diameter for a 2g turbo. There was so many conflicting pages online and miss information out there. I think it's 2.25 from what I'm reading. Some say 2.5My car has a welded in cat from a prior owner, I've been wanting to do a cat back, but...

So I've been searching all over the internet for the stock cam specifications for my 98 GST. All I can find is aftermarket specs. Seems like everywhere I look everyone regurgitates the same information about how 1g cams are better or this or that. I need to know the stock specs so I can make...

Out of no where I started the car and heard a terrible knocking noise. Turned off right away, to avoid further damage. Grabbed a friend to crank while I listened under the hood. After checking a few things, started again and got a lot of banging around in the top of the engine. Then it became a...

I'm giving up on the third set of lowering springs I've installed. Currently on H&R springs that claim a 1.7" drop front and 1.4" drop rear. The one's before were a claimed 2" drop. I really see no difference with these. I am wondering if coilovers can be used to raise ride height, or if the...

I took the car through its first car wash since finishing it's repairs and the sunroof and rear hatch leak heavily. What are the options for replacement seals? These damn universal companies pollute every search I attempt with cheap stick on garbage. I want a legit repair. Can't find any...

Hey guys, this seller is close to me. Is it really a GSX brake kit? It doesn't look any different from my GST brakes. I think it's BS. Are GSX rears non-vented? Single piston rear calipers? That's what I see. I heard they were better than GST brakes. (Also know that I'd never pay his price for...

Alright guys, I hate wheel discussions, but here we go. Is anyone running these Volk TE37 knock offs? The brand is Avid1 and the wheel is called the AV-06. It is the best looking TE37 knock off Ive seen. The only concern I have is the offset. I want the size 17x8 but it only comes in a +35. The...

Hey guys, do you think this Delphi pump is any good? $13.90 seems to good to be true, but I'm thinking about doing it. My pump hasn't quite failed yet, and I would plan to keep it in the car in case this new one fails, but the reason I'm wanting to change the pump is that it has a super long...

I'm having trouble getting a set of lowering springs that fit this car. Are there any differences in the springs from N/A to turbo? Spyder? AWD? I have had two full cheapo ebay sets delivered and attempted install, and now returning. The common issue is the springs are too large in diameter and...

I wanted to see what shifters the DSMers go with these days. Which one's work good for these cars, fit correctly, install without a headache, low price if possible. 98 GSTThe car came with a long stupid 6-shooter revolver looking shifter and its wobbly and just garbage all around. I'm going in...

I have blown out engine and trans mounts. Nasty movement, shakes, and vibration especially shifting during "spirited" driving.I have owned several mitsu's and mounts are a constant problem. My 01 is just a 4 cyl and ends up blowing out the front and rear mounts quick. On this car, I want to...

As some of you know, I picked up a 98 GST (manual trans) with a few issues. I fixed all the engine related problems first and have to pass smog to register. I have put over 100 miles on the car over three different cold starts over the past few days. I have not cleared one single readiness...

Hey guys, I have been reading around the site and learning a lot about my new 98 GST. I was surprised to learn a stock 2g is factory set to around 14psi of boost. (before Im jumped on for that, Ive done a lot of external research too and it seems people argue about that a lot.) But its 1g that...

Hello everyone. I just picked up my first 2nd gen (1998 GS-T). Will be asking a lot of questions about the technical side of things in the near future. I currently own an 01 GS, and have had two different first gen Lasers in the past. All non-turbo beaters.Just saying hello and joining up...