This is a GST that was converted to GSX. Less than 2000 miles on the motor and less than 500 on the cams and springs. It has a fresh tune and no problems at all. This is professionally built and done right. Excessive also installed new front axles and a battery when they installed the motor...
Bringing it back from the dead. I know the stock gauge is useless and all of that. I just want everything working in my car and it irritates me that the oil pressure gauge is pegged. If anyone could give me some pointers I would greatly appreciate it. Motor is all under 2000 miles now everything...
I actually got it working, I cleaned the contacts on the fob that were all gummed up. I don’t know why I didn’t think of that right away. But now alarm and keyless entry work great. I will still be ordering a door jam switch to replace the missing one just to make everything right. Thanks for...
Awesome. I didn’t program the fob because the alarm will go off using the fob so I figured it was programmed. The weird thing is that the indicator light on the fob lights up red when I press the alarm button but the light won’t light up when pressing the lock or unlock button. Unlocking the...
My alarm works from the fob but lock and unlock don’t. Anyone have any advice? Power locks work when pressing on the door though just not from the fob. 2g eclipse. Factory fob just replaced batteries.
My alarm works from the fob but lock and unlock doesn't. Anyone have any advice? Power locks work when pressing on the door though just not from the fob. 2g eclipse.
I just ordered that 3m on Amazon too so I’ll let everyone know once I give it a shot.Another question, does anyone know how to adjust the car doors. My passenger door is fine but my drivers door the window glass hits the black molding that the glass is supposed to be under. The molding above...
I just was about to order it and noticed that adhesive is black. I know that stuff will be extra sticky and I’m not trying to have any of that show through. Does anyone else have any ideas.
I can’t open that attachment on my phone I will have to try on my laptop at home.It must just be the angle of my pic because everything is correct and original, I’m just trying to get that sideskirt mounted correctly so I can remove that tape I have on there temporarily.
Pulling tranny to replace a TOB. Also fixing (hopefully) the oil pan leak. I was going off of Jafros tranny removal vids. I’ll check that link when I get home. Thanks so much!!
Hey thanks for the reply! Good idea, I have manageable clearance from the boots even though it’s still pretty tight space. I’m going to get a bigger, stronger pry bar tonight and see if that helps with separating the LCA since I have everything loose and apart. If that doesn’t work I’ll...
Bringing this one back from the dead. Would love any help at all. I have everything unbolted and ready to pull apart, I just cant get the LCA to separate. 22mm bolt is loose I have tried tapping with the hammer, tried a floor jack, tried a prybar. I cant get it separate on either side. Anyone...
This is what I’m talking about, the sideskirt and door molding. Disregard the tape, I needed a quick fix to get it into the garage and didnt want it flapping around. Anyone have any ideas?
Hey, I am looking for a set of the 2g oem hook brackets for my gsx (not sure what they are called) that mount to the exhaust and intake manifold in opposite corners. The exhaust one mounts on the timing side and the intake mounts by the throttle body. They both use the actual studs that go...
Hey guys, I wasn’t sure what section to put this in. But I have my fuel pump assembly all put back together with the dw300 mounted on it, and was about to throw it in before work here but figured I should pump the brakes because I don’t want to do this again and want to make sure I did it right...
I am cleaning out my storage unit and started finally going through 4 totes of extra parts that came with my car when I bought it and never checked out. I’ll keep adding parts as I go through them but figured I could get started on it with what I know and see if anyone is interested. Shoot me a...
I recently cleaned up my eclipse that has been sitting in the garage for a few year, but while cleaning it I noticed on the passenger side the door molding was partially loose and I noticed that the tabs looked to be broken and the PO tried to silicone it into place. Same with the side skirt. I...
I want to start by saying I was not the one who came up with this, I found it on YouTube. It was super cheap ($12) and very easy to make and I feel it will be very effective so I'm just passing it on to all of you guys that have helped me out so much already!So since having the car I have had...
Awesome you are a rockstar of info!! Well the reason I was wanting to run off the factory boost solenoid was because I'm really hoping to not have to run any aftermarket gauges... I actually threw the old a pillar gauge cluster and gauges in storage and picked up a stock gray a pillar to match...
Yeah I saw that earlier I was just worried about not taking out the right crap I guess haha. So that round can in the pic is actually my evap canister for sure then? Also I read that some people that do the delete still use the fuel pressure solenoid? Should I do the same or is it pointless...
Haha I am actually researching it as we speak I think that is the smarter route since I found my egr solenoid has two broke nipples, so either get a block off plate or look for a new solenoid... I think I'm going to do the delete and just be done with it. I'm trying to find a good reference...
well that explains why the cruise doesnt work... so im assuming the bottom is mounted on the car somewhere in that area where the rest is supposed to be? have you looked into what it would take to fix the cruise? The last pic I believe is the purge control valve, I am just having a hard time...
So I went back and started taking parts off to make room to see what I am up against and what I will all need to pick up for vacuum line sizes and such and I came across a few questions.
What is this and why would the bottom be blown out of it?
Is this my Evap canister I read that it's...
I know it, I have had my hands full the whole car has been like this... missing radio, missing interior, busted front bumper, all sorts of messed up and extra wiring, and these vacuum lines, oil leaks... that's only half of it... it's coming together though I hope to bring her back to her glory...
Hey guys I followed another post on how to make a homemade boost leak tester because I was thinking I had a boost leak well low and behold I have all sorts of them. And all of the lines are a cobbled mess I feel like and I need someone smarter than me to look this over if you have a chance and...
Awesome that is actually a huge help! I will give that a shot for sure. I do plan on having this car for a long time however I am just trying to get it running and driving right, trying to fix everything all the previous owners have done to it and put things back to normal and then start making...
Yeah that's kind of what I figured and what I was afraid of. I wonder if I have a problem with both because I can see some seems like oil seepage on my exhaust manifold on the farthest right cylinder as you are looking at it. I'll have to do some research and see if it's something I can try to...
Alright I appreciate it. Does anyone have an idea of why it would smoke pretty bad at start up and then go away after it's been running for awhile. If I get on it pretty good it sometimes smokes too. Valves? Any ideas would be awesome!
I was going to post this on the ecmlink forums but for some reason my password is showing incorrect and the password reset wont send to my email. Just got the V3 and I have looked up this question but have not found anything on it. I'm wondering if I need to do actual pulls down the road (we...
Sorry to start back up an old post but I cant find these smoked lights anywhere! does anyone have a set for sale or know where to find them? I checked ebay and about every site on google I could find and nothing! TIA
I wanted to since I also have some parts to sell as I change things out on the car, but I can't yet since I just started my account here. I have to wait until I can post classifieds. I'll check that out! Thanks!
Hey all! As I posted before I just picked up this car not long ago and it is slammed to the ground. Bought some coilovers that I hope to install this weekend, but the front bumper is pretty beat up. Looking for opinions if this will be super expensive to fix would I be better off getting abused...