I should have said it a little clearer. You bring water to a boil, then turn the heat source off which immediately stops the water from boiling and then place the paint can in the center. So youre not technically putting it in boiling water. Its not going to explode at those temps. It cools down...

I dont have a 1g but i doubt its just bolted on from the factory which you probably already know. Im sure you could just measure it and buy one the same size and have it welded on for cheap. Good luck either way.

So I have a bare block that im about to wire brush but I want to do it the best way I can. I know to tape it off and not wire brush any of the mating surfaces. I heard about baking the block since some paints call for that but I dont know if the block will fit in my oven LOL so I heard about...

Ive fixed worse. If you plan on having a shop fix it you might as well go find another dsm to buy. Red eclipse hood and fenders should be easy to find but i wouldnt find red, just get the parts so you can drive it. Airbags are like $50 each on ebay. Good luck

Im also wondering how you got it running?

I would install a new pilot bearing if you drop the trans. Good luck.

I didnt watch the vid but i would think the throw out bearing. I wouldnt drive it AT ALL. Just pull the trans and check it out.. But i love working on cars so dropping the trans is nothing. Im not sure what your skill level is or what tools you have access to. I pulled a few 4g63 engines/trans...

Maybe hook the egr back up and see if the problem still exist.

I had a 2002 bonneville that did the exact same thing.. Changed oil, fuel filter, spark plugs because they were needed and replaced the battery since the neg cable was practically broken off inside the battery... Ended up being a very dirty maf. i think i just unplugged it and it ran fine, thats...

I just bought a hx35w and I need to clean the compressor housing and maybe the turbine housing. I was thinking hot soapy water and a small brass wire brush for cleaning the outside of the compressor the. I might just buy a single scroll housing instead of trying to remove the rust from this one...

Heres a pretty good thread about the ignition power transistor.http://www.dsmtuners.com/threads/ignition-power-transistor.395895/

Dont worry about offending anybody. You own the cars and you can do whatever the hell you want with them lol. I personally like the 95-99 talons better. Mine was red and I loved it and would never swap it out for an eclipse. If you really want a gsx just fix and sell the 2 cars you have now and...

If you swap any bumpers the colors wont match and thats gonna hurt the resale. If you can fix the eclipse for cheap then do it and sell it. My first eclipse was a 98 with the 420a and i sold it and bought a 95 talon awd. I would swap the leather seats into the talon asap and whatever rims you...

He would be better off starting a new thread imo. He asked if the problem was ever resolved.. The last time the op was active was about 7 years ago.. I suggest you start a new thread and give more detail like did you replace the harmonic dampener with a new oem or and aftermarket? Did you check...

This thread is from 2009...

I actually bought a turbo from jusmx141 but that was over 5 years ago. I will be sure to buy a genuine holset CHRA. Is there a website i can buy it from?

Here's the eBay link http://m.ebay.com/itm/Holset-Turbo-HX40-Billet-Compressor-Wheel-Housing-/111688395804?hash=item1a0125ac1c%3Ag%3AKwkAAOSw2s1Uvx2f&_trkparms=pageci%253Ab69c6ea7-f32a-11e6-8e7d-005056974c58%257Cparentrq%253A3fb5882a15a0a2a4d67db855fff90774%257Ciid%253A6

This is from the auction for the compressorBillet slim hub 7 blade 60 x 86 hx40 compressor wheel Extended TIp New HX40 60 x 86 compressor housing to match Light weight Compressor wheel Narrow Hub Compressor wheel Taller Blades and Extended Blades

With an equal length exhaust manifold they do lol I hope.

T3 flange. I will buy the 12 blade. Thank you for the help.

I would rather have it spool quicker than have better top end.

What is better a 10 or 12 blade turbine? I see 64mm 76mm or a 66mm 76mm, I'm not sure which one to buy and they have them both in 10 or 12 blade. Thank you for any help. This forum has the most Holset info I have read. Some scumbag stole my last Holset turbo from my garage so I'm buying piece by...

Where can I buy a twin scroll hx40 turbine housing? I found one website that sells them for $175 new buts it's not made by Holset, it's on summit racing.com. I don't want cheap no name junk but it's just the turbine housing so maybe that's a decent quality piece.