Hello everyone
First of all, sorry if my English is bad, I'm writing to you from the south of France :)I've got a European eclipse, 2.0 N/A 4G63 (Not 420A).I have a problem with the coolant.
It doesn't overheat.
I don't have any leaks.
But the overflow jar is emptying.
When I fill it and...
Hi guy’s,Today, my GST did something new..I explain :
I moved it from the garden to work on it. It starts smooth, i drove it to the garage to work on it.
Everything was fine.I started the engine 2 hours later, and it did the same this in the YouTube video below (it’s my car)Timing belt...
Hi guys !!Currently on the eclipse, I have an exhaust after catalyst 3 "HKS, and a homemade decat.
But I think it does not make enough noise.
Will a stainless steel downpipe make more noise?
Do I need to change the turbo collector and the O2 Housing too?
My turbo is an original turbo :)Thank...
Hello everyoneI come to you because, for months, my eclipse makes a belt noise at startup only, and when I accelerate between 1000 and 1500 rpm.
I just noticed that this is my crankshaft pulley.
To describe what is happening, it seems to turn as if the pulley itself was deformed, and so it...
Hello everyone,I write from France because I have a problem with my GST eclipse of 1996.
The last time I took it, I had a fuel cut when I accelerated.
She had never done it to me, it was the first time.This morning when I started to work, down a climb, I accelerated and this time, the...
Hi guysI come to you because I have a big problem with my GST eclipse of 1997.the problem is that when I acclimatize, arrived at 4000 rpm, the turbo cut, and I feel that my engine exploded.I read on the forum that there was the phenomenon of "fuel cut" which could produce this sensation...
hi guys :)I have a questionI have an AFR jauge AEM with a wireband
At Idle, my AFR is perfect, 14.5-1 14.7-1
But when i’m riding, i’m at less than 10-1
Do you know with my AFR is so rich ?Thanks :)
Hello everyone,All my shifter has to be rebuild, I have a lot of play in my gear lever.
Does anyone have a list of bushing to order to rebuild the shifter?Thank you all, and if I ask is because I'm French and I do not know what are the keywords to type on google to find: /
Thank you :)
Hi guys,I’ve got a problem with my GST.
It’s a 1997 engine manual.The problem is when I want to drive, i take the first gear on but it jumps, and once of two it goes to neutral automaticly.
The others gears doesn’t jump, just the first.Is there an adjustement to do at the clutch ?
Clutch...
Hi guys,I’ve got a problem with my GST.
It’s a 1997 engine manual.The problem is when I want to drive, i take the first gear on but it jumps, and once of two it goes to neutral automaticly.
The others gears doesn’t jump, just the first.Is there an adjustement to do at the clutch ?
Clutch...
Hi Guy's :)Before begin, sorry for my english, i'm from Paris in France.SOOOOOOOOOOOOO !!!To finish with my idle problems, I bought the Evoscan cable and the Evoscan software.
Now I can connect the car to my computer and read the engine values.I have already read several similar topics...
Hi Guy’s :)I have a leak behind the intake manifold, where hoses go in binacle.
I tried to clamp them more, but nothing change.Do you have a solution?Thanks :)
Hi Guy’s :)I have a leak behind the intake manifold, where hoses go in binacle.
I tried to clamp them more, but nothing change.Do you have a solution?Thanks :)
Hi everyone :)I had a new problem today...I explain, i changed all the intake gaskets, for everything, TB, intake, injectors etc...
a few weeks ago, i did an adjustment of the BISS and ISC.
I checked for a potential leak, nothing.So !!!
When i start the engine, my idle is good.
When i’m...
Hi Guy’s :)Before begin, i’m French and sorry if my English isn’t perfectI have a big problem of Power Steering.
A week ago, i saw a leak in my Power steering Rack.
I bought a new one, and i replaced it.
I bought 2 new bellows too.Tonight, after working on the car, i saw a biiiig leak...
Hey Guys :)Today, I took off my Power Steering Rack because I had a big leak when i Was driving.I’m reading a serious post named « how to repar a power steering rack » but i’m French and my translation isn’t perfectI need to know how to open the rack and take off this bolt ? There is a...
Hi,I have exactly the same problem, i Just changed my TB buy a new one, but my idle stays at 2000rpmI'm French, and so if I understand, I check continuity between TB and the stop screw, i turn the TPS (Fully closed when continuity), and i fix the TPS just when the continuity stopped right ...
hey guys :)Someone can Check in his TB how many turn your biss screw needs to turn to ne fully closed ?
Miller sent me a new TB but the biss screw is fully closed and i need to adjust it properly without dsmlinkThanks :)
Hi guys :)I have a problem with my 2G GST DSM.Before continue, I have Checked for vacuum leaks, nothing except a little leak at the BISS screw.
All my TB gasket are brand new.My problem is this one :
When the engine is cold, and I start the car, the IDLE is at 1200rpm and drop to...
Hey Guy's :)I bought a few days ago an ELM327 cable to run ECMLink, but it doesn't work.Do I need to buy the official cable in the website ECMTuning.inc ?Thanks :)
hey Guys!Yesterday, I put out my sparks and they were white.
After watching the forum, I Bought the good sparks, the NGK BPR6ES, I gap them to 0.7mm (0.28 inch to convert), I also changed the front O2 sensor with a new oneBut, my AEM AFR Gauge still stay at 15.5:1 at idle, so to poor, and...
Hello,I come to you because after the GST swap on my eclipse, my gearbox linkage seems dead.
Let me explain: Before, on my old engine, I was shifting normally. Now, the first gear goes wrong (sometimes even it is back to neutral itself). The 2nd, 3rd and 4th pass normally.
But I have a hard...
hey Guys :)My dsm makes since tonight an ugly noise...
I upload a video from YouTubeMy pressure turbo is at 1B (14.5psi), but the car doesn’t want to run with all its horsepower
It’s looks to be blocked by somethingI checked all the hose, vacuum, and I didn’t found any leaks...
hi guys :)Yesterday, I post my problem for the BISS and ISC.
Yesterday night (in France) I resolved the problem and I found a new good idle.But tonight, I wanted to drive my GST, but I don’t have Turbo...
I have a big noise like a leak, but I looked every vacuum and hose, I found nothing...
hi Guys :)I come to you after my GST swap in my GS 2G.
Everything looks right after the swap but, my car still run between 1000 et 2000rpmAs a noob, I touch the screw BISS and now my engine doesn’t runs good.What is the procedure for make a manual adjustment in our 2G ?
I live in France...
hey guys :)I post you a video from YouTube with my problem
Actually, the engine don’t want to start after my swap.It’s a 7 Bolt from Miller Import PartsI bought all the engine with harness and ÉCU
I changed sparks, timing belt and I made all the replacement of fluids and little...
Hey Guy's :)I was watching an old thread about all the electrical connections on our engine, and i saw a part I don't have, Miller didn't send me it with the swap.It's the Fuel Injector Resistor box.The engine doesn't want to start. maybe it's because of that ?
Can I delete it easier ...
Hi guys :)I fixed my problem of yesterday, it was my starter relay...Now, the engine is ready to go but it doesn’t want...
I did :
- All timing belt
- CAS
Everything...
I checked my fuel. I have fuel in my engine
I checked sparks, and I have electricityNow, I don’t know what I can do...
Hey guys !During my swap, from 4G63 N/A to 4G63 GST in my 2G, I had a problem with the harnessI explain :
I have a new engine Harness 4G63T, with an eprom and everything I need.
I also have my old N/A harness with my old fuse box.4G63T and 4G63 N/A have the same fuse box.
BUT !
At the...
hi guys :)Before beginning, I apologize for my bad English, I’m French :)Actually, I’m swapping a GST engine on my basic GS.
Everything was ok, but now I’m in front of many electrical problems.- There is 3 connectors where I don’t know to connect them, I put you some pictures, can you...
Hi guys :)Happy new year from France !!!Recently, I bought a FMIC, it’s an used fmic.
The guy didn’t sent me the notice to put it in my engine.It doesn’t look similar to the others fmic you can buy on websites.
Does someone know this fmic and you I can assembly it ?Sorry for my bad...
Hi guys ;)Before beginning, I wish you a merry Xmas, and I’m sorry for my bad English, I’m french :)I’m swapping a GST engine on my GS, and I have a problem with the hoses in the intake manifoldI connect them (4 hoses green, red, blue and black) on the electronic parts, but I have 3...
Hello everyone,I am currently swap my old 4G63 N / A engine by a 4G63T engine from an Eclipse GST.
In France, it's a first :)I contact you to know if my list is complete for swap, all the parts below are already ordered, I want to know if it is missing?
- 4G63T engine with manifold...
Hello !I am contacting you because I plan to mount a dump valve on my GST engine.I was told that I absolutely had to take a recirculating dump valve that had to be reconnected to the inlet hose because I have a MAF.I just wonder, I see a lot of videos on Youtube where people take...
Hi guysI'd like to prepare as much as I can my N/A DSM 2G from Europe.
I don't want to swap a GST Engine (can't found one in France...)Do you know if my calculator is an Eprom or an ECU ?
Codes are : MD327134 and E2T61680Thanks a lot :)
Good evening,I contact you because I bought bucket seats for my mitsubishi eclipse.These are Sparco seats, with fixings from below the seat. I do not know how to fix them, are there slides or fixations specific for the eclipse? Or can I fit the original seat bindings? The fixings of the...
Hello everyone !!!I contact you because I want to buy on Maperformance camshafts for my eclipse 4G63 N / A European 146ch.I need some information before ordering, would it be great if you could answer me? :)- Are these trees mounted on my engine? Obviously yes, no worries and no difference...
Hello everyoneI would have liked to know if someone could give me the voltage of the intake throttle position sensor?I dismantled mine to clean it but badly repositioned, result the car gives a few a-blows.Thank you very much :)
Hi guys,I am trying to mount an original collector with a bigger butterfly.
For information, I have an eclipse 2G 4G63 N / A.A friend told me that the intake manifold and the throttle valve were larger on the 1G eclipse, and on the GSX models.Can you confirm that?And also, will engine...
Hello everyone,
My name is Kévin, I am 23 years old and I am from France, near Paris.
I do not know if my request is in the right category of the forum, and if it is not the case I'm sorry, my English is not perfect ^^I have therefore for 6 months a eclipse GS of 1996 that comes to the base of...