Did everyone get their calendar after buying it? I’ve still never received mine and can’t get an answer from the place I bought it. I spoke to the lady that made it through messages but she said she sold them through the company. Anyone know another email for the company selling the calendars?
I know I’m always talking about domestic or .... A Honda in the hangout forum but I enjoy the Cleetus McFarland channel. To see what they accomplished WCF ‘19 was pretty amazing considering they literally changed to a entirely different clutch setup the day before World Cup! To be such a small...
What goes into building the stock transmission stronger; it’s a question I’m sure many people have asked but most haven’t had answered other than the standard “buy better parts” answer. Stronger shift forks, upgraded gear sets and other parts that are extremely expensive through aftermarket...
I am always in shock to see what this thing does rather it’s 1/4 mile or 1/2 mile! Does anyone have an idea of how much he has in that car the way it sits? Not how much he spent to get it there. If someone won the Lott for a few million dollars and said “Build me that Boostin Performance” how...
Anyone have a pic of the wires/connectors to the oil pressure gauge and sending unit? I’ve got 2 wires that had the connectors ripped off when alternator belt broke. Both wires are coming out of the alternator wiring. I’m trying to see what connectors are needed so I can find them at a parts...
I’m stuck as chuck trying to find a place to mount this thing! I’ve got an AEM fuel rail with the matching AN fitting welded on. Here are a couple of pics so maybe somebody can help me figure this out. I’m keeping the A/C so that’s causing some of the problem.
I was digging around in the garage trying to clear the clutter and found some parts I had forgotten about buried back in the corner. There’s only a few things but anything made helps with buying a wideband. Ive got 2 power steering pumps, 1 reservoir and I’m listing my other ECU again. I’m not...
like to stay under $200 so that leaves a lot to choose from. I know a lot is just which a person prefers but I’m looking to see which one will give me the best bang for the buck. Any of them easier to install, which offers a little more control while tuning(Ecuflash for now). There’s so many out...
I didn’t want to clutter any of the other forums so I brought this here. I’ve taken the ECU out and replaced it and now can’t for the life of me get the dang thing back in! :banghead: It’s pissing me off so much I called it quits the rest of the day when I wanted to get more work done. What’s...
Like it says I’ve got the first gen Translator and wiring with 2 3” GM Maf sensors. $120 obo. I need to get rid of it pretty quick. Buyer pays shipping and PP fees.
Is there anyone near this gentleman that could pick them up and ship them to me? I’ll buy the doors pay for shipping and pay someone to help me out. I’d pay everyone with PayPal and I’m not from Nigeria trying to have you send me money :D $200 is insane price for the doors so I had to see if...
I saw this on Ludachris’s profile and had to share my thoughts on this video! I don’t know if they were able to see the setups under the hood before they raced but they definitely didn’t think the cars could run very fast at all! The guy that guessed 25.25 was the only one of the 3 that gave the...
This isn’t my car and I don’t know the owner but it looks like an unreal deal! If I had the $ it’d already be in my driveway. I wanted to get it on here so everyone could look at it if they’re looking for a 2G. https://www.facebook.com/marketplace/item/2276043675945907/
Street Car Takeover 2.0 at Knoxville Dragstrip is hosting a big Street car event for true Street cars. Daily drivers with full interior( rear seats deleted is ok as long as no metal is showing) head lights etc. Full rules list is on Facebook(I know, that site ) I’m not associated with the event...
What kind of difference is there between the injectors when tuning? I’ve currently running a Walbro 255 but upgrading to a Walbro 450 or something similar. I’ve read a lot about the efficiency but the price difference is huge. I’m not saying I’m definitely buying Low Z but I’d like to get some...
i went to start the car and nothing no starter turning nothing. The battery fuse and alternator fuse both blown. Hmm something isn’t right lol. Replaced the fuses and everything works but won’t start. I have fuel and spark albeit looks weak. I thought the ECU fried so I swapped in my 95-96 ECU...
I’m trying to buy CeddyMods but don’t know how to contact him. I can’t find the information on ceddy.us and before going thru with buying it from the store I just want to have contact with him first. I searched here but wasn’t able to find anything recent. My search keywords were “contact...
Has anyone seen an Evodroid7? It looks very interesting to me. I've always wondered if there was a way to have something like that. I did a search in the forums and didn't find anything. Of course 'ol Goo brings up everything but nothing related to actually buying one. Anyone know of anything...
'98 GSX leather interior, if I remove all of it, sound deadening (install lighter deadening) and lighter race seats and 6 point harness and hoop roll bar behind front seats installed. Just from that change what savings will I see? I'm looking at a 2-3 month goal to be able to get to events in...
Yes; my GSX is getting the respect it deserves and will be done right. I now have time to build my son's '95 Civic CX hatch. Swapped '95 Civic coupe Ex D16Z6/Si trans and P28 ECU. We're finishing up pulling out the interior except GSR black bucket seats. Considering it's going to my son's...
I the alternator is no good. I had a bad battery. I had a battery with 950cca in the garage (actually 3) and hooked it to the car. Tried to start it and it barely would turn over. Battery still reading 12.5 so I hooked up to my Edge and it just turned over fine but wouldn't start. I'm going to...
Has anyone roll raced at an event? I can't afford drag racing(break too many parts) but I've seen events lately that have roll racing. If anyone has ran any of the events what setup are you running?
Donut Media
I hope everyone has seen this guy before because his videos are not only hilarious but also informative! I don't know the guy so i'm not trying to promote his channel for compensation I just think everyone will find him funny and enjoy the channel. Watch one video and see what you...
Anyone else play this game? Holy shit I'm pretty sure it's as close to really racing as I've experienced on a console. Started w the controller; eerrgghh, ass kicked, bout little Ferrari wheel/pedal $100 kit; nope, my ass still took a beating. If I wasn't saving to get my real car running I'd be...
12/18 @ 6 P.M. my 20 yr old son graduated L.P.N. school. He now has to take the state nursing exam to become a L.P.N. just like his dad. Hopefully his girlfriend that I raised while they were in school together passes also so yay! Time sure flies!
Know the owner and use to know the car but when I finally bought the car it had a slightly larger turbo and different injectors. What do I do to find out the trim of the turbo? Housing is Precision 60-1 that I can see w/o taking it completely off but I'm afraid I already know the answer. Take it...
I can't remember how to load a picture so I'll go search for the information and then i will show why the car is in the garage and being resurrected. Started the process with maintenance items. I'll show you what happens when the car isn't properly tuned. If I would have been a dumba** and just...
Trying to eliminate one or the other but unfortunately I can't find my factory MAF. That leaves being stuck w MAFT for a month or so. Tuned the car lord knows how on both and drove in the garage. Disconnect battery, unhook SAFC try to start the car. Solid RED on translator. Repeatedly until a...
Just bought 98 GSX from my buddy it only has afc 2 and gm maft to tune and im lost. Anyone near Knoxville TN i will pay you GOOD to tune this thing just so I can drive it while saving for ESMlink or AEM 8653869319 Matt
I've did some research and found that a stock GSX top speed is 150 mph but by increasing HP would the stock gear ratio of 5th gear be able to go faster than 150mph? The only reason I ask is because I plan on building my car to run in some of the 1/2 mile events that have become so popular in the...
Anyone close to Knoxville that has any knowledge how to set up Maft and SAfc2 ? I just need to go a ton until I either find ECMlink/Dsmlink and ECU or AEM s2. I'll come to you
Yesterday I finally got my newest DSM. I've been on here for years but had issues w my original account so for the sake of Introduction , I'll start here. My profile will be updated w pics of the car and paperwork of anything that had been done before it became a staple in a group of myself and...
Before I even get started let me state; I'm not looking to receive replies telling me I'm an idiot for even thinking that I could do such a thing and I should just send it to a reputable transmission company to have them do the job. I'm fully aware of the knowledge and experience that each...
My goal is to roll race at TX2K19. I understand it's going to require lots of parts and money and some things I'm not sure if they exist. This is the follow up question asking about 5 speed transmission and capable top speed. Does anyone know that if were to buy a built transmission from...
I'm not sure where to post this but I moved closer to Knoxville TN than I was and found a shop with an AWD dyno!!! I went in met everyone and found out they're pretty big time in DSM shootouts, just got back from TX2K where they had their 800hp Subaru STI and their white GTR. Fastech...
What's the top speed in a factory 5 speed? I know there are a few reputable transmission builders that would know the answer. I'm also curious with buying a a built transmission can you get a taller 5th gear installed? Random question I know but something I've wondered for a long time