Ordered the Denso O2 and an aluminum bung... Noone had them here at a store... INSTALLING IS GONNA SUCK.. Now to have my ECMLink and figure out how to configure everything and hopefully start... Fingers Crossed...
i heard its a bosch something but i cant find it.. sorry im bad at looking things up i guess i just wanna go to napa or an autoparts store and pick one up... So does anyone know the maker or part number so i can go pick one up...
i dont have the factory tray and i havent found anything to fit or a person to weld in a spot.. i have a Optima Yellow Top Battery to fit there i just need the tray so i can mount the battery securely.. it fits on the right side back area of engine bay so if anyone has that tray available i got...
i am sorry I got busy with work this summer and was working 6 days a week 10 hr days bleh but I still need help I thank anyone for that help ill be emailing a few people to see if that help is still avail.. thanks again.. I tried to do some mods and those didn't go through so I am back to square...
I built my car and had engine taken out and refreshed and added some new parts like a head and HLAs and some other goodies.. Put it all back together and was having help with the wiring.. WELLLL the person helping with the wiring had to leave the area and hence took his expertise with him. He...
hello all... I recently rebuilt my car a 99 GSX eclipse AWD Turbo.. I am having major Wiring Harness Issues.. the person who was helping me no longer is local and took the book he labeled stuff with and I have no idea how to fix this issue.. I was wondering if anyone was local that could come...
YES... I am lying.. I choose to make up a story to get a bunch of answers that mean nothing cause I actually didn't do it..... Yes I did torque down to 30 and I am glad I didn't strip anything.. I loosened a little and hope I didn't stretch or mess up anything. AND MY GASKET ISNT A PAPER...
Found out that the Inside Intake bolts are to be Torqued to 14 lbs and my Friend who helped me torque them down said they were supposed to be 30 so now that I know they are NOT to be 30 do I loosen them to 14 or will the gasket be messed up from being torqued down so hard.? or leave them? will...
No when I took it apart I sanded and coated with ceramic coating.. BUT taped off all areas where surfaces met so nothing would interfere.. it was hard to get out in beginning. and yes wheel spins Freely.. no obstruction
Eagle 100mm crank here and its fine when I refreshed everything nothing needed to be done to it.. I polished it to be sure but nothing major needed done an it seen some beating. just my 2.
the only reason I asked this question at all was because when putting the BEP back on my turbo I have it wouldn't just slide in and done.. it had to be hit with a rubbermallet to get it to seat.. and then you cant clock it if its pushed in because its soo tight it cant turn with out hitting with...
HP Plus - Autocross & Track Brake Compound
Front Brake Pad
Pad Description:
- Extremely High Friction Output - Fade Resistant - Worthy for Autocross & Club Racing Events
Title:
Part#: HB214N.618
$147.10
Street Race
Front Brake Pad
Pad Description:
- Increased stopping power - High friction/torque hot or cold - Gentle on rotors - Extended pad life - Low dust - Virtually noise-free - Ideal for import and domestic automobiles
Title:
Part#: HB214F.618
yes it is a hx35 says on the plate on the cover but was just making sure there wasn't a swap on anything. so I could check n make sure before ordering parts id have to return. plus own personal knowing of the turbo.
and yes the BEP its what im looking for.
Thanks for that.. that's what im trying to find out if it was modified like yours was.. so I am trying to see if the hot side is a hx35 or 40... when I put it in the previous BEP housing it was a bear to get in.. had to knock with rubber mallet so I was wondering or was it just a tight fit to...
Yes I already have the turbo just not sure its the correct hot side.. and I did google it... and the bottom 2 are what im looking for just wondering what is the difference from the 35 to 40.. I am pretty sure its a 35 just was checking on how to make sure cause im tired of ordering stuff that...
it doesn't ask me for measurements on xtreme just says external waste gate on O2 sensor or on manifold and that's it... doesn't ask for measurements.. says its a .55 A/R and same verbiage for each description of each.. so I cant tell apart the difference.. and there is one for hx40 and hx35 just...
im trying to find a Turbine Housing and there is one for Hx35 and 40 and I don't know exactly what I have on here...Its a BullsEye Housing and one is for each but look exactly like each other so is it the size of hole the CHRA fits in or the Opposite side or what? I looked around before posting...
Can anyone help me... I recently Purchased some Hawk Front Brake pads for my 99 GSX AWD.. I received them and they are too small... I called in they said they were the wrong part number for that those were for fwd not AWD... I have part number HB213 F.626 and I was wondering if anyone knew what...
OEM Washers it is... I didn't Spend Close to 4K to skimp out now on parts... BUT DAMN OEM!!!!!!!! Overly Expensive Material... What it should STAND FOR!!!
Are they REQUIRED? I was told not to but as I seen on the DIAGRAMS there are 2 on each of the top bolts of the Turbo to MANIFOLD... Do I require these ...
http://www.streettunedmotorsports.com/parts/oem_mitsubishi_turbo_lock_washer_mr187848.htm
or do I even need washers to hold the 4 bolts ....
Thinking im gonna go with some timkens I found on rock auto for 60 each.. better than the 130 for OEM... Just hope it lasts up don't want a wheel to go shooting off at 100...
What is a good replacement OEM or any aftermarket.. im lookin at C-Tek Standard kind.. OEM ones are Expensive.. was wondering if these would be ok or be bad over time.. Or what kind are good replacements besides OEM.. Thank you.
I am going to Purchase new head studs and when asked Which I needed I was given choices and I was wondering.. The L19 says for Drag Use so is L19 Over Kill? im shooting for 500 550 AWHP.. so THOUGHTS And ADVICE?? Thank You..
Ok I cleaned the valves with Carb Dip and wire wheeled all the carbon and crap on them down to normal they look like new almost but should they be refaced too or? Thanks for the Knowledge. I read this entire thread and glad I did, I wont bend valves now... Well at least ill try not to..."Give...
im about to get my head worked on and I am contemplating getting Bronze Valve Guides. That's 150 Plus Guides 65, a valve Job 250 and Resurfacing 75. I was told I needed all new Valves since the head I got is Not the head they came out of, that I cant use the old valves but I thought a valve job...
I have a set of rear tail light for bulb type of setup.. BNIB. ONLY opened box to inspect when I purchased and received them.. Since I have decided to go in a different direction with the look.. So my indecisiveness is your GAIN.. I paid $180 id be willing to do a round $110 Shipped OBO here...
I have a set of rear tail light for bulb type of setup.. BNIB. ONLY opened box to inspect when I purchased and received them.. Since I have decided to go in a different direction with the look.. So my indecisiveness is your GAIN.. I paid $180 id be willing to do a round $110 shipped OBO ...
Yes!! I found what I was looking for on accident on another Thread not even talking this but I found a link to Carboneticsinc and this is what I found..https://www.carboneticsinc.com/copia-de-drag-wingPerfect for what I wanna do.. Now just how to take out the air bag I will read on the...
Hello thread.. how are you guys tonight? So I just wanna ask real quick while I see the Debate on these BEAUTIFUL Pieces OF Art..Ahem.... So until I can get my hands on a set of these lovely GEMS... I was wanting to upgrade my Suspension and I ran across some information pertaining to 3rd Gen...
Hello I got this idea from a Car Design I seen... I want to take the Airbag Unit out of my Passenger Side and replace it with a Docking Station and Holder for my TABLET that I want to run ECM Link on.. I want to do this because I wanna be able to Tune On the fly plus use it as another Screen to...